BOC Speciality Gases L200 Regulator 850295

Jun-Air Model 6 Silent Air Compressor 12-40 with 40 Litre Receiver Tank This item was removed from a (more) university lab where it was surplus to requirements. The unit is in excellent cosmetic condition and operates very quietly at 48dB. It passed a PAT test on 2.10.24. The compressor starts and runs smoothly, with the regulator stopping the compressor at 8 bar and restarting at 6 bar. No further testing was carried out. Specifications:- Model: 6 12-40 - Serial No.: 71394 - Year: 2010 - Output at 8 bar: 64 l/min - Max pressure: 12.2 bar - 40 litre tank - Fitted with oil trap and odour filter

Large Safety Cabinet/Cupboard fitted with Gas Regulators This was removed from a university lab whe (more)re it was surplus to requirements. The unit is untested but in reasonably good cosmetic condition.

Thermo Scientific LTQ Orbitrap XL Hybrid Ion Mass Spec System This system was removed from a univers (more)ity where it was surplus to requirement. It is in reasonably good cosmetic condition and powered on with the pump operable. The previous owner has stated that the PC & hard drive has been removed as they had stopped working, but they reported no faults with the MS itself. It powers up but has not been tested further. Also included with the listing is the following; 1 x Thermo Scientific Gas Specific Triple Filter Helium2 x LTQ Orbitrap Biotech Operations Training Course Manual Various other unidentifiable parts - photos included.

E1-class mass standards are the elite in the world of metrology, because standards of this class rep (more)resent the highest level of precision and accuracy in mass measurement. The E1 classification is one of the most stringent standards that standards must meet in order to be considered the most advanced and trustworthy measurement tools. E1 - class standard: stainless steel wire Nominal value: 500 mg Material: stainless steel What Are the Characteristics of the E1 Class? Highest Precision - The allowable deviation from the actual weight is minimal, making standards of this class ideal for applications where every gram matters. Stability and Repeatability - This guarantees a consistent level of accuracy over the long term. Accurate Calibration - Standards of this class must be regularly compared with other standards of known mass to confirm their measurement accuracy. Materials with Unique Properties - E1 class mass standards are often made of materials with exceptional physical properties, which makes them stable and resistant to changes in environmental conditions. Application 1. Analytical Laboratories In analytical laboratories where accurate measurements are crucial, E1 class mass standards are used to calibrate balances with the highest precision. 2. Pharmaceutical Industry In drug manufacturing, where even the slightest deviation from the standard affects quality, E1 class mass standards are irreplaceable. 3. Scientific Research In scientific research, especially in areas requiring the highest precision, such as physics or chemistry, E1 class mass standards are used to ensure reliable results. 4. Metrology Industry In metrology laboratories where research on E1 class mass standards alone is carried out, E1 class standards are the standard of excellence. Class E1 mass standards are not only measuring tools, but also a symbol of metrological excellence. Their use affects the quality of measurements in various areas of life because they provide precision that can be relied upon. They are a key element in the world of mass measurement, shaping standards and raising the bar for all measurement tools.

MWMH series modules are not offered or distributed in the following countries: Germany, Switzerland, (more) Italy, Japan and the USA. Vast Max Capacity Range Magnetoelectric weighing modules MWMH are intended for mass measurement ranging from 1kg to 10kg. Minimum readability of 0.01g guarantees amazing accuracy for your measurement. Protection Against Challenging Conditions Hermetic versions of modules feature stainless steel housing with IP65 and IP69K. This allows operation even in the most challenging conditions. Mechanical design lacks sharp edges and gaps which ensures adherence to HACCP, GMP and FDA standards for safety and quality of operation. Fast and Precise Measurement High measurement accuracy with sd=1d* guarantees both readout of real weighing results and repeatability of indications. Cutting-edge design solutions provide fast measurement which is an asset allowing to install the module on automated production lines. Intended for fast and dynamic measuring processes the weighing module’s converter throughput is 3200 meas./s. Cooperation with terminals Connecting the module to a multifunctional weighing terminal expands communication interfaces range and increases usage in industrial applications. Mechanical design versions: MWMH xxx - 1 - model with Binder connectors (IP65), MWMH xxx - 2 - model with Binder connectors, (IP65), power supply and control of the transporter on a weighing pan, MWMH xxx - 3 - model with cable glands, (IP 69K), MWMH xxx - 4 - model with cable glands (IP69K), power supply and control of the transporter on a weighing pan MWMH xxx - TWD - model with cable glands (IP 69K).

HX7.4P2 H is a beam scale made of stainless steel. 4-load-cell, 2-component mechanical design stands (more) for high measurement accuracy. The weights may be loaded onto the pan using a forklift or a transporter crane, supplementary handles significantly facilitate the transport. The device has been fitted with a 7" colour display and a diode bar graph. Blinking green and red diodes show current load mass, the mass is presented in reference to the scale range or declared minimum and maximum thresholds. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety.

Scilogex DS-160/T14 Saw-tooth Generator Probe The Scilogex DS-160/T14 Saw-tooth Generator Probe is a (more) specialized tool designed for use with the Benchmark D160 Homogenizer, specifically for homogenizing samples in a volume range of 100 to 1000ml. With dimensions of 14mm x 130mm, this generator is a 14 mm saw tooth attachment that fits easily onto the homogenizer. The saw tooth design ensures efficient and thorough homogenization of samples, while the length of the generator allows for homogenization of larger sample volumes. INCLUDED: The Scilogex DS-160/T14 Saw-tooth Generator Probe includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Polyscience MX28C135-A11B 28L Coliform Bath, MX (Ambient +10° to 135°C), 120V, 60Hz3D Visualization  (more)of the Polyscience Coliform BathThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. The PolyScience Circulating Bath with MX Temperature Controller is intended for the precise temperature control of suitable liquids in a reservoir. Extremely easy to use and maintain, it combines design innovation with highly intuitive operation to deliver convenient and versatile liquid temperature control for a wide range of applications. Features include an MX Temperature Controller, a 28-liter reservoir with a hinged, see-through gable cover, a large, easy-to-read display, DuraTop™, a large bath opening, a large, universal icon and English display, on-screen prompts, and single-point calibration capability.Click Here to View Product Video INCLUDED: The Polyscience MX28C135-A11B 28L Coliform Bath, MX (Ambient +10° to 135°C), 120V, 60Hz includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty