Bigneat F3-XIT-D Powder Weighing and Handling Cabinet Lab

This BIOAIR Safeflow 2 Class 2 Biological Safety Cabinet was removed from a university lab where it  (more)was surplus to requirements. The unit powers up, but an Unsafe message appears on the screen. "Incorrect laminar flow & CPU alive." There is a black line through the screen. It may just need a service to rectify the issue, but we cannot guarantee this. It is in good cosmetic condition with minor marks from use. Internal dimensions are: L114cm x W40cm x H66cm.

This listing is for a CAS BioMAT Class 2 Microbiological Safety Cabinet.The unit is in full working  (more)condition and is ready for immediate release.The BioMAT 2 combines decades of expertise in containment design to offer a range of Class 2 microbiological safety cabinets that prioritize safety, ease of use, and energy efficiency. It provides protection for operators and products while handling biological agents up to Hazard Group 3.Key Features:User-Friendly Interface: Equipped with a 10cm x 6cm TFT touchscreen displaying real-time cabinet operations and an animated airflow diagram. Intuitive controls with crystal-clear iconography simplify functionality, while a four-digit password ensures security.Energy Efficiency: Features energy-efficient EC fan technology and low-loss filters, consuming only 140W under typical operational performance (0.6 m/sec inflow and 0.35 m/sec downflow). The set-back mode reduces energy usage by automatically adjusting settings when the cabinet is unattended.Safety Mechanisms: Full-width LED lighting provides clear indications of any airflow issues, supported by audible alarms and large red LED alerts for malfunctions. The animated airflow diagram gives instant feedback on cabinet status.Quiet Operation: Designed with EC fans and noise reduction technology, the typical noise level is just 49dBA for the 1200mm models, ensuring a comfortable work environment.Sustainability: The BioMAT 2 has achieved CarbonNeutral® product certification, contributing to laboratory carbon reduction goals.Product Specifications:Construction:Cabinet: 1.5mm mild steelInner Liner: Grade 304 stainless steelSide Windows: 5mm UV-resistant toughened glassFront Visor Options:Fixed 200mm aperture with a night door for fumigation.Aerosol-tight motorized sliding sash with anti-trap reverse function (BioMAT 2-S2).Exhaust Options:Standard Exhaust: Single HEPA filter with anti-blowback damper.Thimble Exhaust: Double HEPA filters for enhanced safety.Recirculation: Double HEPA filters with options for vertical or horizontal air discharge.Worktrays: Made from grade 316 stainless steel, available in single or divided sections to meet user needs.Support Stands: Options include fixed height, manually adjustable, or fully DDA-compliant motorized stands.ApplicationsThe BioMAT 2 is ideally suited for laboratories handling biological agents and provides a flexible design tailored to specific laboratory requirements.

BioMat 2 Class II Microbiological Safety Cabinet with Ducted Exhaust on Stand This item was removed  (more)from a university where it was surplus to requirements. The cabinet is in good cosmetic condition and includes a steel stand measuring 113 x 60 x 83 cm (w x d x h). The unit powers up and is in good working order. A strong airflow was observed, and the inflow needle indicator reached the green safe zone during operation. Interior power sockets were tested and are functional. (Socket tester not included.) It's been regularly serviced, with its most recent being on: 22.04.24 Specifications: - Serial No.: MC5765/1 - Exhaust outlet: 20 cm diameter duct connection - Formalin vaporiser external tank Notes: - The fan control button is missing its outer diaphragm, but is operational. - No UV function included.

Grant-bio PHMP microplate thermoshaker. Capacity for  two 96- or 384-well microplates. Temperature r (more)ange from 25°C to 100°C. Stability ± 0.1°C; uniformity ± 0.2°C.  Heated lid. Speed from 250 to 1200 rpm. Rapid heat-up. Timer or continuous operation. LCD display. User manual.

Exhaust Filter: 292 mm, 99.995% Efficiency at 0.3 Micron HEPA Filter Seal Type: HEPEX Zero Leak Neop (more)rene Seal, Spring-loaded Lighting: LED and UV Supply Filter: 376mm, 99.995% Efficiency at 0.3 Micron Work Access Opening: 254 mm Height Support Frame: 673 – 825 mm Interior Dimensions (HxWxD): 716 x 1177 x 659 mm Exterior Dimensions (HxWxD): 1495 x 1361 x 781 m Weight: 218 kg

This Pfeiffer Vacuum  Model - TMU 262 Turbomolecular Pump was removed from a university lab whe (more)re it was surplus to requirements. The unit has not been tested but is in good cosmetic condition with minor marks from use.

Constant Cell Disruption Systems Model T2 40 AA AA Homogeniser French Press Lab This system was remo (more)ved from a university where it was surplus to requirement. The previous client stated this system was in full working order, prior to removal. When powered up, the system successfully passed all self-checks. All elements are in good cosmetic condition. Model Code T2 40 AA AASerial No. 525Firmware v6.10Boot v4.15 Additional parts Included: 1 x user manual4 x allen keys2 x jet removal tools1 x pair of Richmond needle-nosed pliers1 x tube of Dow Corning high vacuum grease, half-used1 x step cranked 14mm spanner1 x 127mm steel flange1 x large internal 6cm valve2 x 60ml syringes1 x 5ml syringe1 x plastic T-fork2 x O-rings Part No. KE9041 x O-rings Part No. KE16083 x O-rings Part No. BOF000761 x O-rings Part No. BOF001761 x O-rings Part No. BOF003147 x O-rings Part No. BOF000732 x target anvils Part No. KE23995 x seal assembly Part No. DRG027012 x hard cases for spares and tools

VC 10 lite Input Pressure 1 to 1,050 mbar Measurement Range 1 to 1,100 mbar Temp. Measuring Max. 200 (more)°C Features - Valve cleaning function for long service life - High energy efficiency thanks to device-to-device communication: control of the circulator by connecting the vacuum controller with PC 1.3 data cable (available as accessory) - Integrated ventilation valve for simple pressure equalization and aeration with inert gas after process completion - VENT short key button allows pressure equalization during a running process - Program function: up to ten user-defined programs can be saved, with up to ten pressure/time sequences - USB / RS232 interfaces for connection with the laboratory software labworldsoft® - Electronic control system for improved process efficiency and higher solvent recovery rate - High energy efficiency thanks to device-to-device communication (vacuum controller to recirculating chiller) The IKA VC 10 lite VC 10 Vacuum Controller is a highly efficient and versatile device designed for optimal vacuum control in laboratory settings. It features a valve cleaning function for long service life and high energy efficiency through device-to-device communication. The controller can connect to a circulator via a PC 1.3 data cable (available as an accessory) for enhanced control. It includes an integrated ventilation valve for simple pressure equalization and aeration with inert gas after process completion. The VENT short key button allows pressure equalization during a running process. The program function supports up to ten user-defined programs with up to ten pressure/time sequences. Equipped with USB and RS232 interfaces, it easily connects with the lab software labworldsoft®. The electronic control system improves process efficiency and solvent recovery rate. The device supports a wide range of connection diameters and pressure units and features a ceramic Al2O3 vacuum sensor for accurate measurements. With a control range of 1 - 1100 mbar and a resolution of 1 mbar, it ensures precise vacuum control. The vacuum controller also includes a timer, temperature measurement capabilities, and a graph function. Compact and lightweight, with dimensions of 95 x 150 x 110 mm and a weight of 1.284 kg, it is suitable for various laboratory applications, offering robust performance and user-friendly operation.INCLUDED: The IKA VC 10 lite VC 10 Vacuum controller includes: - VC 10 lite - USB Cable - USB A to Micro-B, 2 m - Two Year Manufacturer's Warranty

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.