Lauda Alpha RA 8 Cooling Thermostatic Water Bath Lab

Water bath from 25°C to 100°C for the laboratory The water baths of the LAUDA Hydro series are the i (more)deal tools for any laboratory application, whether biological, medical or biochemical and guarantee a homogeneous temperature distribution without overheating problems. High quality stainless steel and thoughtful design, provide the ideal depth and opening for any application with bathroom volumes from 4 to 41 liters. All water baths offer a temperature range up to 100°C, with a temperature stability of ±0.1K, so that applications even in the boiling range are possible. A TFT color display ensures intuitive operation with temperature display in °C and °F. Application examples - Preparation of cellular, biological or medical samples - Microbiological test incubation - Thawing of the samples - Conducting chemical reactions Notable features - Three timer functions for the user - Electric resistance inside the tank - Direct temperature control for fast and precise heating - Visual and acoustic alarm in case of lack of water, low / high temperature and sensor break - Digital and electromechanical safety system - Lid designed to prevent condensation from dripping onto samples - Exhaust valve on all models Standard equipment - Lid and drain tap in heat-insulating double-walled stainless steel Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Dump valve on all Hydro Lauda models. Simple control panel with large TFT display with extensive information; change settings and navigate quickly and easily. Optical and acoustic alarm for low water level and over/under temperature as well as sensor breakage/short circuit. Optimized space, safety and comfort of use. Connection for water level regulator (available as accessory). Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Water bath from 25°C to 99.9°C for the laboratory The shaking water baths of the LAUDA Hydro series  (more)stir laboratory samples with linear or orbital motion, depending on the model. They are reliable instruments, ideal for any laboratory application, be it biological, medical or biochemical, guaranteeing a homogeneous distribution of the temperature. The integrated speed controller enables a load-independent, continuously adjustable stirring movement with soft start. The H 20 SW and H 20 SOW shaking water baths are equipped with a cooling coil as standard. The temperature range can be extended to a minimum of +10°C by connecting them to the domestic water supply or commercially available circulating chillers. Qualitative characteristics - Digital regulation of the temperature and indication via LED display - Load-independent, continuously variable stirring with soft start - Electronic monitoring of the thermoregulator functions, with two fuses for under/over temperature protection - Tank, frame, cover with condensation channel, shaking basket and heater in stainless steel - No dripping condensation – arched insulating lid to reduce heat loss and prevent condensation from dripping onto samples Operation All water baths come standard with a perforated pan and no racks are required. Flasks and containers can be placed directly on the bottom. The drain valve is located on the rear side. Controllers The control panel consists of a large, high-contrast TFT display and a membrane keyboard with four softkeys, protected against dirt and water drops. The menu will guide you on how to use the bain-marie correctly. Esempi applicativi - Bacteriological tests - Molecular biology - Demulsivity studies - Processing of chemical reactions - Thawing - Metallurgical analyses - Incubation of microbiological assays - heating reagents - Environmental studies - Food Processing (QC) - Water quality research - Cytochemistry Accessories available Water level regulator. The heating element is located directly under the sieve plate for even temperature distribution in the tank. Electronic monitoring of the temperature regulator. Two independently operating temperature fuses. Improved visual and audible alarms for increased sample safety. Control elements tilted back for increased splash protection and improved operating comfort. - Perforated plate to place the glassware directly on the bottom. - Fill mark max. to prevent overflows. - Easy removal of sieve plate for cleaning. Highest quality materials: tank interior, lid, sieve and heating element made of stainless steel. Heat insulating lid in stainless steel, double walled with internal curvature to guide the condensate. Limescale deposits inside the water bath can be removed with normal commercial descalers. The internal tray can be easily disassembled and lifted for quick and thorough cleaning. Recommended accessories - Water level regulator. Thanks to this accessory, the loss of water inside the instrument (through evaporation) is compensated and the water level is kept constant. Furthermore, it allows use at temperatures below ambient temperatures, with a minimum of approx. 3°C above tap water temperature.

Digital temperture control and selectable display of set and actual temperature PT100 sensor Timer 1 (more) to 99 min with audible alarm Overheating protection (even when bath is empty) Capacity: 16L Outer dimensions(w x d x h): 331mm x 396mm x 265mm Bath dimensions(w x d x h): 290mm × 300mm × 190mm Weight: 10kg Including rack with 36 spaces

This Grant SBB Aqua 18 Plus Boiling  Water Bath was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and has been tested with a digital thermometer. It is a boiling bath so only works to 100˚C.  It reached 96.8˚C. Digital thermometer not included. The lid is missing but it is in otherwise good cosmetic condition with minor marks. 18 litre water capacity

This was removed from a university lab where it was surplus to requirements. The water bath module i (more)s in working order, but we have not tested the air inlet at our facility. It is in good cosmetic condition with minor marks from use. PN - 103193/1

Yamato CF-303Y Cooling Water Circulator 3.9L, 115V Operating Ambient Temp. Range 5 to 35°C Max. Flo (more)w Rate 10L/min. Refrigerant R452A Features - User-friendly controller with high visibility and improved operability. Possible to switch between measured temperature and set temperature - Convenient circulation pathway connection is completed by inserting a hard tube with 10 mm OD or flexible hose with 9mm ID. Connector can be freely moved and be set in the desired direction - Easy drainage of condensate water via a drain port near the connector on the upper rear of the unit - Easy to clean intake filter located on the front of the unit can be removed when cleaning - Space-saving solvent recovery device stored in the main body as secondary trap (option for CF802A) A powerful 3.9L closed circulation system with excellent cooling capacity designed to work with laboratory equipment such as rotary evaporators. Easy maintenance of air intake filter. Rotatable connector which can freely be moved and be set in the desired orientation. Convenient drainage of waste water. Compact and space-saving to fit on laboratory tables and limited space. Temp. range: -20°C ~ 30°C. INCLUDED: The Yamato CF-303Y Cooling Water Circulator 3.9L, 115V includes: - Condensation drain hose - Hose clamp (2) - Hose nozzle (for flexible hose connection(2) - spare fuse for service outlet 2A (1) for CF802A - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

This Ready to Process Wave 25 Bioreactor System was removed from a university lab where it was surpl (more)us to requirements. None of the items have been tested because the power supply was not included. The system is in good cosmetic condition with minor marks from use. Included are; 1x GE Ready to Process CBCUCode no.28998100Mfg year 2015 1x GE Ready to Process Pump 25 w/ 2x pump headsCode No. 29000704Mfg year 2015There is some damage to the housing of the unit on the bottom LHS of the unit -as seen in photo. 2x PumpHeads:114DV OEM Pumpheads Prod Nos.113.5000.R33Ser Nos.66056-266056-3Mfg 2015 1x Icellis Docking StationProd No. 820284The unit is in good cosmetic conditionThe unit has a 32 Oz Nalgene vessel, 1x PALL Life Sciences Icellis Nano lidSer No. P004_G_169 1x Hamilton Visiferm DO 120 Sensor:Part no. 242450Heat Nos.•541742•425755Ser No. 026570 1x Icellis Perfusion Module w/ 2x pump headsProd No. 820288 Pumpheads:102R Twin Roller low-flowProd No. 013.211.000

Labconco CentriVap 12-17 mm Acid-Resistant Rotor Easilyinterchangeable PTFE-coated aluminum rotors w (more)ith PTFE hubs hold tubes at anangle to maximize surface areas INCLUDED: The Labconco 7455001 CentriVap 12-17 mm Acid-Resistant Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor The Eppendorf 5425 Centrifuge w/ FA-24x2 Fixe (more)d Angle Rotor is a whisper quiet microcentrifuge offering an outstanding set of features for a broad range of molecular and cell biology applications. Short runs up to 12 minutes are whisper quiet at an average noise level of 45 dB(A) and maximum RCF of up to 21,300 x g. This is sufficient for centrifugation steps of most routinely used DNA/RNA purification kits. The 5425 also features a wide speed range, with a minimum speed of 100 RPM and a maximum speed of 15,060 RPM. With a comprehensive range of 6 rotors as well, this broadens the spectrum of applications of the 5425. The included FA-24x2 Fixed Angle Rotor reaches a maximum speed of 15,060 RPM. Click Here to View Product Video INCLUDED: The Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor includes: - FA-24x2 Fixed Angle Rotor with Aerosol Lid - Rotor Wrench - Power Cord - Operator's Manual - Full 6 Month Parts and Labor Warranty Eppendorf 5425 Centrifuge w/ FA-24x2 Fixed Angle Rotor SpecificationsMaximum Speed15,060 RPMMaximum RCF21,300 x gMaximum Capacity24 x 1.5/2.0 ml 10 x 5.0 mlTemperature RangeN/ATimer10 seconds to 9:59 hours, with continuous runAcceleration Time15 secondsDeceleration Time15 secondsDimensions (W x D x H)9.45 x 15.35 x 9.45 in. (24 x 39 x 24 cm)Weight34.39 lb. (15.6 kg)Electrical Requirements120V, 50/60Hz, 3.8A, 280WRefrigerationNo Refrigeration