Heating immersion heater / Thermostat IKA ET B Basic Yellow Line

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Applied Thermal Control K4 K410000W Industrial Recirculating Chiller This item was removed from a un (more)iversity where it was surplus to requirement. It is in very good cosmetic condition and powers up. The previous owner has reported that the recycling water has been contaminated with coolant. It is sold for spares/repairs Product Details: Part K6NS227Serial No. 1200193 phase power supply 6kw cooling capacity2 separate circulating outputsTemp range 4 to 35˚C17L/min flow rate10 bar max

Sanyo Biomedical Freezer Model MDF-U537 with Full Drawer Storage Lab This item was removed from a un (more)iversity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). Includes the following: 6 x Shelves: 64 x 50 cm8 x Drawers: 29 x 55 x 100 cm 6 x Drawers: 29 x 55 x 140 cm

Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V Temperature Range Ambient +10°C to 26 (more)0°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 27L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports The Yamato DKN-302C Programmable Forced Convection Oven 27L with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Arctiko Flexaline LFE 490-US -25C / -10C Upright Freezer Refrigerant R290 Temperature Range -25°C  (more)to -10°C Capacity 17.34 Cu.FT (491 Liters) Features - Superior performance and temperature stability - High-quality MEC-183 digital controller with battery backup - Integrated data logger with USB interface - Attractive purchase price - Freeze guard (refrigerator models) - Door alarm - Solid door Lock - Power failure alarm (visual and acoustic) - LED light - Port hole (20mm) - Forced air cooling (refrigerator models) - UL61010 certification - Energy Star rating - 115V/60Hz supply - Sizes available from 2.11cu.ft. up to 21.11 cu.ft. The Arctiko Flexaline™ LFE 490-US upright freezer offers the superior features required for biomedical applications at an attractive price.INCLUDED: The Arctiko Flexaline LFE 490-US -25C / -10C Upright Freezer includes: - Key for Door Lock - Shelves - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Corepoint Scientific PF051WWW-0M30 -27C to -33C Solid Door Freestanding Undercounter Laboratory Free (more)zer Temperature Setpoint Range -27°C to -33°C Capacity 4 cu. ft. Defrost Method Manual Features - Microprocessor temperature controller with digital display - Audible and visual high and low temperature alarms - Two probes: one in air and one in sample bottle - Remote alarm contacts for added security - Keyed door lock with magnetic gasket for positive seal - Recessed door handle and leveling legs - LED interior light and probe access port - Environmentally friendly HFC-free refrigerant (R600a) and foam insulation The Corepoint Scientific PF051WWW-0M30 is a high-performance freestanding undercounter laboratory freezer designed to maintain temperatures between -27°C to -33°C. It features a microprocessor temperature controller and digital display for precise temperature control, verification, and recovery. The unit is equipped with audible and visual high and low temperature alarms, remote alarm contacts, and two probes (one in air and one in a sample bottle) to ensure the security of critical samples. It has a solid swing door, a keyed lock, and a magnetic door gasket for a positive seal. Inside, the freezer includes three adjustable shelves with a guard rail to prevent products from being pushed against the back wall, a bottom footed shelf for air circulation, and a back wall evaporator cover. Additional features include a recessed door handle, leveling legs, LED interior light, and a probe access port. The white cabinet and door are insulated with high-density urethane foam, and the freezer uses environmentally friendly HFC-free refrigerant (R290) and foam insulation, ensuring sustainable and efficient operation. INCLUDED: The Corepoint Scientific PF051WWW-0M30 -27C to -33C Solid Door Freestanding Undercounter Laboratory Freezer includes: - Key for Door Lock - 3 x Adjustable Shelves - Power Cord - Operator's Manual - 3 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

ProMinent Dosing Pump gamma/L Type, Gala 1000NPB200UB000000 This was removed from a university lab w (more)here it was surplus to requirements. The unit is in good cosmetic condition and powers up without issue.

MA X7.IC.A moisture analyzers are hi-tech measuring instruments intended for quick determination of  (more)relative moisture content, dry mass content and other parameters in samples of different substances. MA.X7.IC.A series is equipped with innovative system: the drying chamber can be opened and closed automatically using button or proximity sensors. Such solution allows: Maintaining moisture analyzer clean – operator does not touch moisture analyzer’s housing. Removing any shocks caused by manual closing of the chamber – the chamber closes automatically and always with the same intensity. Achieving high repeatability of opening and closing the drying chamber. Enhancing drying process automation. Enhancing safety of operation by eliminating contact with hot components of drying chamber. Improving operation ergonomics. MA.X7.IC.A series features user-friendly colour touchscreen. Free configuration of the control panel can be done by means of hotkeys, customizable information fields and programmable labels. Drying process can be carried out for any temperature and – thanks to databases – particular drying process may be set for a specific product. Highlights of X7 Series moisture analyzers: Automatic opening and closing of the drying chamber 7” capacitive colour touchpad Modern interface Uncomplicated, intuitive operation Programmable display Drying profiles (standard, mild, step, fast) GLP/GMP printouts-reports Repeatable and customized applications Work optimization due to the use of halogen lamps Capacity and temperature MA.X7.IC.A maximum capacity ranges from 50g/0.1mg to 210g/0.1mg. Moisture content is measured with the 0.01% accuracy (0.001 % for samples bigger than 1.5g). The maximum drying temperature is 160˚C (there is an optional moisture analyzer with 250˚C maximum temperature). An additional element for moisture analyzers that improves their functionality is a water vapour permeability determination set used in tanning industry for determining hygienic properties of leather. Databases: Information system of X7 series moisture analyzers is based on 8 databases, allowing many users to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 8 databases: Products (up to 5000 products) Users (up to 100 users) Packaging (up to 100 packagings) Customers (up to 1000 customers) Drying programs (up to 200 drying programs) Drying process reports (up to 5000 drying process reports) Ambient conditions (up to 10000 records) Weighings (up to 50000 records) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Interfaces USB interface ensures quick transfer and copying of any results of your work (measurements, reports, databases) to a computer or other moisture analyzer. Remote access to the moisture analyzer allows for online data management. Cooperation with E2R allows for external data management which in turn increases the efficiency and results to the maximum.

Motic Panthera TEC POL (Binocular) Features - UC Plan Achromat objectives (strain-free) for FOV 22mm (more) - Transmitted and transmitted/ incident stand options - Transmitted light: LED/HAL light source interchangeable - Integrated focusable/ centerable Bertrand lens - Motic LightTracer: Coded nosepiece & Digital light intensity knob The Panthera TEC POL series fills a last gap in the Panthera family: Polarization microscopes for all material sciences, ready to handle transparent samples like fibers and foils with their inherent birefringence. The Incident light models for opaque materials work out the specific reflectivity (bireflection) of flat surfaces. To extend the application fields, all microscopes carry an intermediate tube with Bertrand lens to analyze the crystal structure and interference figures of gems, precious stones and minerals.INCLUDED: The Motic Panthera TEC POL (Binocular) includes: - 4X/0.1 (WD 30.5mm) Objective - 10X/0.25 (WD 17.4mm) Objective - 40X/0.65/S (WD 0.6mm) Objective - 60X/0.8/S (WD 0.35mm) Objective - Widefield UC-WF10X/22mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Blue Filter - Halogen Bulb - Adjustable Key for Nosepiece - Interference Color Chart - Screws for Metal Extension Support - Operator's Guide Motic Panthera TEC POL (Binocular) SpecificationsOptical systemColour Corrected Infinity Optical System (CCIS®)Observation tubeBinocular head, Siedentopf typeSensor type-Sensor size-Capture resolution-Live display mode (through Wi-Fi)-Live display mode (through ethernet)-Live display mode (through HDMI)-Inclination25º inclinedTrinocular light split-Interpupillary distance48-75mmDiopter adjustmentOn both eyepieces, +/- 4 diopterEyepiecesWidefield UC-WF10X/22mm with diopter adjustmentNosepieceReversed quintuple, coded with single centering holesIntermediate BodyRotatable analyzer 360º, Bertrand lens and slot for compensatorsObjective classificationCCIS® UC Plan Achromatic (strain-free), DINObjectives4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)Objective mounting threadW 4/5"x1/36" (RMS standard)StageCircular rotating 360º, lockableStage sizeØ160mmTravel range X&Y1º increments, 0.1º vernier scaleCondenserFocusable and centerable Achromat Swing-out Abbe condenser N.A. 0.90/0.13 (strain-free) and rotatable polarizerDiaphragmIris diaphragmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2µmFocusing stroke25mmUpper limit stopUpper limit stop preset but adjustableFilter holderOn top of the illuminator with fixing capTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlIllumination interchangeabilityHalogen/LED and LED color temperature interchangeabilityIllumination featuresMotic LightTracer: Light memory, sleep mode (auto on-off), nosepiece LED light intensity and mode indicatorTransformerInternalPower supply110-240V (CE)Other featuresUSB 2.0 for external camera powerDimensions LxWxH410x300x395mmNet weight10.4kgComparison of ModelsSpecificationPanthera TEC POL (Binocular)Panthera TEC POL (Digital)Panthera TEC POL (Trinocular)Optical systemCCISCCISCCISObservation tubeBinocular head, Siedentopf typeBinocular head, Siedentopf type with built-in digital cameraTrinocular head, Siedentopf typeEyepiecesWidefield UC-WF10X/22mm with diopter adjustmentWidefield UC-WF10X/22mm with diopter adjustmentWidefield UC-WF10X/22mm with diopter adjustmentObjectives4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)StageCircular rotating 360º, lockableCircular rotating 360º, lockableCircular rotating 360º, lockableStage sizeØ160mmØ160mmØ160mmTravel range X&Y1º increments, 0.1º vernier scale1º increments, 0.1º vernier scale1º increments, 0.1º vernier scaleFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentCoaxial coarse and fine focusing system with tension adjustmentCoaxial coarse and fine focusing system with tension adjustmentTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlKoehler Quartz halogen 6V/30W with intensity controlKoehler Quartz halogen 6V/30W with intensity control.comparison-table tr td:nth-child(2) { background-color: #fffacd; }DownloadsTechnical Specification Download