Shimadzu RF-10AXL Spectrofluorometer Detector HPLC Lab

Varian ProStar System GC 410, PDA Detector, Solvent Delivery Module System Lab This system was  (more)removed from a university where it was surplus to requirement. All units are in good cosmetic condition and have powered on and passed self-check tests.We are unable to test them further at our facility as the system does not include a PC with relevant software. All units included are as follows: Varian ProStar Model 410 HPLC Autosampler LabP/N - 03-935290-03S/N - 20300 PDA DetectorModel - 330S/N - 00924Good condition. Solvent Delivery ModuleModel - 210S/N - 02241Good condition. Solvent Delivery ModuleModel - 210S/N - 02242Good condition.

Thermo Finnigan Surveyor HPLC System, Autosampler, PDA Detector & LC Pump This was removed from  (more)a university lab where it was surplus to requirements. The system powers up but has not been tested further at our facility. It is in very good cosmetic condition with minor marks. Included are; ThermoFinnigan Autosampler SurveyorModel: AutosamplerSerial#: 77184Year: 2002 ThermoFinnigan PDA Detector Model: PDA DetectorSerial#: 56847Year: 2002 ThermoFinnigan LC Pump SurveyorModel: Surveyor MS PumpSerial#: 62911Year: 2003

This Dionex ICS-3000 ION Chromatography System was removed from a university lab where it was surplu (more)s to requirements. The system has been professionally serviced and is in full working order. A full report is available on request. It is in good cosmetic condition with minor marks. SP:Powers on okCommunicates with ChromeleonRetrieves data configurationPump primes and operates DC:Firmware 2.6.0Powers on okCommunicated with ChromeleonRetrieves data configurationInject valve separates okOven heats to set temperature on both zonesAll ok AS50:Firmware 1.21USB rev 1.00All diagnostics tests passedAll internal tests passedInject port alignment checked and okNew Syringe fitted.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The 515 HPLC pump is a programmable, free-standing HPLC pump available in isocratic, gradient, and s (more)emi-preparative configurations: Precise stepper motor control (48 steps/µL resolution) of dual reciprocating pistons Non-circular drive gears provide smooth, uniform eluent delivery User-programmable flow rate calibration and compressibility compensation factors ensure straightforward pump operation qualification Tests to retention time variations of less than 0.1% for highly reproducible peak performance Easy-to-read display and keypad for error-free programming Automatic purging and flow calibration

This Applikon Biotechnology EZ-Control Bioreactor System was removed from a university lab where it  (more)was surplus to requirements. Included are; Applikon Biotechnology EZ-Control Bioreactor SystemCat no. Z310110010SN - P19208/2Unit dimensions - L41 W37 H72cmThe unit powers on and boots up, but was not tested further. Parts:-Applikon Type P100eCat no. Z510000010SN - P323750/19 Applikon Water Console Applikon 7L Glas Biorector Vessel with Heat jacket Trolley Dimensions - L108 W61 H144cmBottom Shelves - 70 x 59cm Consumables/Accessories:-Applikon 20L Appliflex Reusable pH & DO Sensors Cat no. Z650002040Applikon 10L Appliflex Reusable pH & DO Sensors Cat no. Z650001040Box of 2 x AppliSens Sensor ProbesBox of 1 x AppliSens Sensor ProbeMembrane Kit Z110000426Ethernet cableVarious metal partsApplikon Slotted Blindstopper M18 X 1.52 x Applikon Air Inlet Pipe+Porous Sparger 7LApplikon Ribbed Blindstopper M30X1Applikon Assembly Holder M10Ass holder 6mm tube M18x1.5Various probe cablesApplikon Licence file EZ Control + Manuals Dongle Z310110010Heat Jacket - Powers on and heats up

Thermofisher Quant Studio 5 Real-Time PCR Machine Inventory ID: DAM_QS5FCondition: UsedYear: 2021Vin (more)/Serial No: 272528491 Full working order, sale is to due to this system being surplus to requirements The normal terms and conditions do not apply to this item. This item is non returnable and non refundable.

Thermo Vacuum Generators High Vacuum Deposition Sputtering System Lab This system was removed from a (more) university lab where it was surplus to requirement. The previous client has stated that it was in full working order when last used, reaching 10<sup style="color: rgb(51, 60, 68); background-color: rgb(255, 255, 255);">-9</sup> mbar vacuum.It is in good cosmetic condition with all units included in good working order. The system comprises the following components: - Thermo Vacuum Generators main reaction chamber Serial No. CH0412005- 2 x Softshut gate units Part No. V10EA100 Serial Nos. SS0412002 SS0412003- Leybold Turbovac Pump Serial No. 30000045767 - Pfeiffer Vacuum compact cold cathode gauge Type IKR261 BOC Edwards EXT75DX turbomolecular high vacuum pumpSerial No. 046074705- 3 x Luftkuelung pump cooling fans - 3 x Vulcatherm V1 1000W heaters - 2 x Elstein FSR 1000W heaters - RHC Vacuum Generators ZRHC substrate heater controller Serial No. RC0407002- Turbotronik NT20 and NT10 analysis chamber and load lock control unit Serial No. 30000050971- Thermo Electron AML pressure gauge controller Serial No. 0006- Thermo Electron 8558 argon etch gun controller Serial No. G117- Hiden Analytical ion gun turbo interface - Pfeiffer ion gas gun gauge - Power breaker circuit box - Leybold vacuum pump Type D16B serial No. 30000044357 - Edwards vacuum pump E2M1 serial No. 046078290 - Leybold vacuum pump type S1.5 serial No. 20900831099 Additional parts: - 2 x 16 amp cartridge fuses - 14 x 2 amp cartridge fuses - 1 x filament for ion gauge DC7033AA - 2 x air 1/4" tee pieces - 1 x pfeiffer seal for ion gun BN846241-T - 4 x resistor filaments - 1 x Kurt J. Lesker 500g net tin of molecular sieve 1/8" pellets Type 13x Operating and instruction manuals: - Thermo EX03 Ion Gun System - Thermo High Pressure Gas Cell - Arun Microelectronics Pressure Gauge Controller Interface - Pfeiffer Vacuum TPG261 - Varian MidiVac Controller 929-x - Varian Sublimation Controller 929-x - Leybold Turbovac - Leybold turbotronik NT20 - NT10 - Eurotherm 2132 and 2166 PID Temperature Controllers

Memmert UF75plus Forced Circulation Oven 74L, 115V Working Temperature Range Min. 10°C above ambien (more)t up to +300°C Oven Type Forced Air Circulation Chamber Volume 74 L (2.61 cu.ft.) Features - Working temperature range from Min 10°C above ambient up to +300°C, with a high-resolution display - Volume of 74 L (2.61 cu.ft.), offering ample space for various applications - TwinDISPLAY with multifunctional digital PID-microprocessor controller and dual high-definition TFT-color displays - Comprehensive safety mechanisms including overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB - Function SetpointWAIT ensures processing only begins once the target temperature is reached - AtmoCONTROL software on a USB stick allows for advanced programming, management, and data transfer via Ethernet or USB port - AutoSAFETY features integrated over- and undertemperature monitoring "ASF", automatically adjusting and providing alarms for any temperature deviations - Stainless steel interior with deep drawn ribbing and integrated heating on four sides, designed for easy cleaning and durability The Memmert UF75plus Forced Circulation Oven 74L, 115V is a versatile and high-performance oven designed to meet the rigorous demands of laboratory applications. Its working temperature range from 10°C above ambient to +300°C provides the flexibility needed for various thermal processes. Equipped with TwinDISPLAY, this oven offers precise control through its multifunctional digital PID-microprocessor controller and two high-definition TFT-color displays, ensuring reliable and easy monitoring of all critical parameters. The 74L (2.61 cu.ft.) chamber, with its stainless steel interior and deep-drawn ribbing, allows for uniform heating, while its easy-to-clean design adds to its convenience and longevity. The UF75plus prioritizes safety with comprehensive mechanisms such as the overtemperature monitor TWW, adjustable temperature limiter TWB, and mechanical temperature limiter TB. These features are further enhanced by AutoSAFETY technology, which includes over- and undertemperature monitoring, ensuring that any deviations trigger timely alarms. The oven's advanced functionality is supported by the AtmoCONTROL software, allowing users to program, manage, and transfer data through a USB or Ethernet interface. With additional features like Function SetpointWAIT, which ensures the process begins only when the target temperature is reached, and the ability to adjust fan speed and fresh air admixture in 10% increments, the UF75plus is a top-tier solution for precise, safe, and efficient thermal processing. INCLUDED: TheMemmert UF75plus Forced Circulation Oven 74L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

If you buy a Multifunctional Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Multifunctional scales HY10 series is designed to fast and precise determination of mass in industrial conditions. The HY10 scales features terminal PUE HY10 series in stainless steel housing and a single load cell weighing platform in mild steel powder coated version. The HY10 series scales features mild steel powder coated construction with stainless steel weighing platform. The terminal PUE HY10 series features a 10,1” colourful touch screen display, keyboard with numeric and function keys. The scales enable cooperating with an additional weighing platforms. Additionally, the HY10 series offers full functionality available in the terminal PUE HY10 series: programmable display and function keys, designing custom printout templates, designing text data indicated on terminal display. Multifunctional scales HY10 series are offered with a terminal connected to a weighing platform through a cable. Scales HY10 series is available in dual range version on surcharge. Dedicated Applications Smart Editor The application is intended for scales equipped with the HY10 terminal. It does not require any additional installations. Enter the terminal’s address in the browser address field and log in. The application enables: - remote databases editing - import of images from the graphic file to the scale - labels import from lb file to the scale - creating and preview of report, e.g. Workflow - dosing processes operation Smart Display The application allows to personalise the scale screen and display it on a computer. The Smart Display enables customization of the display screen in a simple and clear way. Place the individual elements on a grid visible on the screen. These elements can be further scaled to suit user needs. When operated directly on the scale, the user gets a new, refreshed look with the possibility of any configuration of the home screen. If the application is operated via a computer browser, it enables remote control of the desktop or setting larger mass indication window. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface.

The autoclave is suited as a universal autoclave for demanding sterilization tasks. The autoclave is (more) intended for use in  the medical field, e.g. in general physician and dental practices. The autoclave is not approved for the sterilization of liquids. Programs Universal Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 5:30 min, Operating time: 30 min, Drying: 20 min Quick program B: Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 5:30 min, Operating time: 30 min, Drying: 10 min Quick program S: Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 3:30 min, Operating time: 30 min, Drying: 5 min Gentle program: Sterilization temperature: 121°C, Sterilization pressure: 1.1 bar, Sterilization time: 20:30 min, Operating time: 45 min, Drying: 20 min Prion program: Sterilization temperature: 134°C, Sterilization pressure: 2.1 bar, Sterilization time: 20:30 min, Operating time: 45 min, Drying: 20 min Chamber dimensions (⌀xD): 250 x 350 mm Capacity: 17 L Dimensions (HxWxD): 490 x 425 x 620 mm Weight: 55 kg