Agilent 1100/1200 HPLC Main Power Supply Part Number 0950-2528

This listing is for a Qiagen Qiagility PCR Prep System.The unit is in full working condition and is  (more)ready for immidate realese.The Qiagen QIAgility Automated PCR Prep System provides users with a fully automated PCR setup, responsive software, and increased productivity. This compact, benchtop liquid handling robot eliminates the need for manual pipetting steps, with high precision and reproducibility. The Qiagen QIAgility uses Qiagen PCR kits and step-by-step guided software to automatically calculate all mixes and worktable set up so you won’t need to program pipetting steps. This PCR prep system uses a single-channel pipetting head with dynamic liquid level sensing and supports almost any kind of thermal cycler and labware.HEPA filter: Preinstalled dual-cartridge 3M Air-Mate HEPA (High-Efficiency Particulate Air) filter system provides positive pressure clean air within the closed hood.Liquid-level sensing: Minimum detection volume (10 µl in 200 µl PCR tubes). Only functional in combination with QIAGEN Conductive Filtered Tips.Pipetting head: Single-channelPrecision: CV <1%, 5–200 µl (dry-well transfer) CV <5%, 2–5 µl (wet-well transfer) CV <10%, 1 µlTable capacity:6 x SBS positions (127.76 x 85.48 mm) for adapters and Tip Rack Holders 1 x Master Mix Block 1 x Reagent BlockTip disposal:All used tips ejected externally — no waste accumulation on the worktableTip volume:1–200 µlUV lamp Preinstalled UV lamp for worktable decontaminationDeck Dimensions 19.5×14”Dimensions 21x25x18″Electrical 100–240 V AC, 250 VA, 50–60 HzWeight 90.2 lbEnvironmental Tolerances Operating temperature, 15–30 °C (59–86°F), Operating humidity: 40–70%

Arctiko ULUF 125 -86°C Ultra Low Undercounter Freezer Temperature Setting -40°C / -86°C Volume 3.3 c (more)u. ft. (94L) Cooling System Single System / Static Features - Single compressor technology that ensures easy maintenance, lower heat dissipation, and low energy consumption - Newly developed noise reduction technology reduces noise level drastically for a more pleasant work environment - Filter less construction prevents dust from blocking the airflow which reduces the unit’s ability to dissipate heat effectively, minimizing maintenance procedure - Direct cooling features evaporator coils in each shelf to cool each compartment directly for maximum uniformity and minimal recovery time - A heated door frame prevents ice from building up around the gasket securing a stable and uniform temperature inside the freezer - The user friendly G214 controller is standard and includes different alarms such as visual, acoustic, open door, and more - An insulated inner door is featured for providing better recovery time after door openings and optimal temperature stability - 100% HCFC &amp; CFC free The Arctiko ULUF 125 -86°C Ultra Low Undercounter Freezer will add a new dimension to your laboratory. The freezer can be used as either a benchtop or undercounter model. The compact space-saving design and low noise level makes it a perfect storage solution for your laboratory. The ULUF -86°C series is produced with the true and original single compressor technology which allows for such a small sized unit. The single compressor technology is specially designed to reduce the number of mechanical components that generate unnecessary heat and noise. This freezer also features filter less construction, which makes cleaning unnecessary. The evaporator coils are spaced so far apart that dust will not be trapped and obstruct the airflow. With this unique construction, the dust intake is minimal, which eliminates the need for filters entirely saving on maintenance time and cost. Even with the smaller size of the ULUF 125, users can expect very reliable performance from this ultra low freezer. INCLUDED: The Arctiko ULUF 125 -86°C Ultra Low Undercounter Freezer includes: - Key for Door Lock - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Ohaus 30400188 Modular Heat Block, 8 x 25 mm Vials The Ohaus 30400188 Modular Heat Block, 8 x 25 mm  (more)Vials is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400188 Modular Heat Block, 8 x 25 mm Vials includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle Z496-1L-A250F 250ml Conical Bottle Insert for Z496-1000-1L, 2/pk The Hermle Z496-1L-A250F 250 (more)ml Conical Bottle Insert for Z496-1000-1L, 2/pk is for use with the Z496-1000-AC Swing Out Rotor and includes two 250ml conical bottle adapters. INCLUDED: The Hermle Z496-1L-A250F 250ml Conical Bottle Insert for Z496-1000-1L, 2/pk includes: - 1 x 250ml adapters, 2 per pack - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Edwards nXDS20iC Dry Scroll PumpFeatures - Bearing shield ensures separation between process gases a (more)nd bearing lubrication to ensure clean vacuum and no possibility of contamination. - Smart motor drive means consistent performance globally, pump overload protection and remote start/stop capability. - High flow gas ballast feature allows pumping of vapours including water vapour at up to 240 gh-1 - Simple single sided scroll design allows maintenance to be done in minutes for low cost of ownership and maximum up-time. - Enhanced versions offer up to 20% lower peak power requirements during initial pump down. The nXDS allows a wide range of control and communication options The nXDS comes as standard with a manual, easy to use, gas ballast port A perfect companion for your turbomolecular pump With exceptional pumping capability, ultimate vacuum performance and state-of-the-art design features Edwards nXDS is the best performing pump in its class.nXDS improves on legacy XDS pumps by offering increased pumping speeds, combined with lower ultimate pressures, lower power consumption and lower noise - up to 20 times quieter than other pumps. Gas ballast allows for pumping of condensable vapours including, water, solvents, dilute acids and bases. nXDS pumps also feature the latest in tip seal technology giving significantly longer life between tip seal changes. Integrated inverter drive with auto sensing voltage input delivers optimised pumping performance globally. The Edwards nXDS20iC features Chemraz internal valves and stainlesssteel fittings for extra protection from the pumped media. The ‘C’ series isbetter designed for more aggressive applications as opposed to the standardseries. Click Here to View Product Video INCLUDED: The Edwards nXDS20iC Dry Scroll Pump includes: - 1 Year Full Parts and Labor Warranty - Power Cord - Manufacturer's Documentation - Operator's Manual Edwards nXDS20iC Dry Scroll Pump Technical SpecificationsNominal rotational speed1800 rpmDisplacement28.0 m3h-1 / 16.5 ft3min-1Peak pumping speed22.0 m3h-1 / 13.0 ft3min-1Ultimate vacuum (total pressure)0.030 mbar / 0.022 TorrMinimum standby rotational speed1200 rpmSpeed control resolution (percentage of full rotation speed)1%Pumping speed at minimum rotational speed10Maximum continuous inlet pressure50 mbarMotor power 1-ph260 WPower connector 1-phIEC EN60320 C13Recommended fuse10A, 250Vac rmsWeight25.6 kg / 56 lbInlet flangeNW25Exhaust flangeNW25Noise level52 dB(A)Vibration at inlet flange&lt; 4.5 mms-1 (rms)Leak tightness (static)&lt; 1x10-6 mbar ls-1Operating temperature range10 to 40 °C / 41 to 104 °FElectrical Supply115/230VComparison of ModelsParameterEdwards nXDS6iCEdwards nXDS10iCEdwards nXDS15iCEdwards nXDS20iCNominal rotational speed (rpm)1800180018001800Displacement (m³h⁻¹ / ft³min⁻¹)6.2 / 3.612.7 / 7.517.1 / 10.128.0 / 16.5Peak pumping speed (m³h⁻¹ / ft³min⁻¹)6.2 / 3.611.4 / 6.715.1 / 8.922.0 / 13.0Ultimate vacuum (total pressure) (mbar / Torr)0.020 / 0.0150.007 / 0.0050.007 / 0.0050.030 / 0.022Weight (kg / lb)26.2 / 5825.8 / 5725.2 / 5625.6 / 56Inlet flangeNW25NW25NW25NW25Noise level (dB(A))52525252Operating temperature range (°C / °F)10 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 10410 to 40 / 41 to 104Electrical Supply115/230V115/230V115/230V115/230V.comparison-table tr td:nth-child(5) { background-color: #fffacd; }