CTC Analytics Leap HTC PAL Autosampler HPLC Chromatography Lab

Beckman Coulter Biomek Robotic Transport and Two ALP Plate Movers This system was removed from a uni (more)versity where it was surplus to requirement. All items are in very good cosmetic condition but are untested due to the control system not being included. The system consists of the following: Biomek Robotic TransportSerial No. 2950119 XP Power PSU with 24v outlet for Biomek Robotic TransportModel PUP110-14-S 2 x Biomek Alp Conveyers, both with Microscan barcode readersSerial Nos. A16512AD1011110002. 394426AD0811100001 Microscan barcode readersModel MS-710Serial Nos. 0904608 1221144

This Tecan Genesis RSP 100 Liquid Handling System with 2200 new 1000ul Tips was removed from a unive (more)rsity lab where it was surplus to requirements. The item powers on and is in good cosmetic condition, we cannot test it further at our facility as it requires connection to a PC with relevant software installed. Includes the following: 1 x case of 96 Tecan Series Disposable Tips order No. 612 512.11 x Gemini Software Manual V3.101 x Tecan EVOware Training handbook1 x Gemini Software Training Course booklet1 x Genesis RSP Operating Manual1 x Genesis Instruments Setup and Service Manual V4.1

Amersham Biosciences Ettan Spotter, Various Parts & Accessories This was removed from a universi (more)ty lab where it was surplus to requirements. The unit has been tested and works well. A Windows XP PC with Ettan Digester software is included. It is in good cosmetic condition with minor marks Included are; Pre-Cut Aluminium Foil Microplate Sealers - Code#: 676003 x 2 215 Utility Programs Ettan Spotter Test Procedure Ettan Spotter Instrument Handbook Ettan Spotter User Manual Ettan Spotter Safety Handbook Ettan Digester Control Software 1.10 Calibration Plate Calibration Tool Distance Tool 215 Level Sensor Cable Assy Fuse, 2.5 amp T-2.5 Clip, Extruded Cable/Tubing Fuse Drawer 110/120V Coupling 1/4-28, PVDF Shielded Gsioc Cable 30"

This FluidX Xtp-1152 was removed from a university lab where it was surplus to requirements. This it (more)em powers up and is in good cosmetic condition. It has not been tested further.

Hewlett Packard HP 6890 GC Gas Chromatograph And Injector This item was removed from a university wh (more)ere it was surplus to requirement. The Hewlett Packard HP 6890 is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. The lab confirmed the system was in good working order prior to removal.

Agilent Technologies 6850 Network GC System with Atas Programmable Injector This system was removed  (more)from a university lab where it was surplus to requirements. The system is in fair cosmetic condition and powers on. However, no further testing was conducted as there is no PC or software available to operate the units. The previous owner reported no known faults but noted that the system has been out of use for several years and would likely need recommissioning. Specifications: - Agilent Technologies 6850 Network GC System - Serial No.: 6850-CN10750008 - Atas Programmable Injector - Serial No.: 36083

Easily accessible features - The special transport containers of B Medical Systems are made of polye (more)thylene, by rotational molding and have an extraordinarily robust, almost indestructible casing, as demonstrated by numerous drop tests - Extremely light. - Corrosion-resistant material for easier and safer handling of the instrument - Structure without corners and joints, which allows easy and thorough cleaning with conventional disinfectants - The clips can be sealed or padlocked to prevent unauthorized opening during transport - The polyurethane foam injected into the double walls of these transport containers is CFC and HCFC free, ensuring excellent insulation and protection even in long transport times and hot climates External dimensions W x D x H (mm): 550 x 475 x 499 Internal dimensions L x W x H (mm): 340 x 260 x 270 Insulation: 90-105mm Storage capacity (gross volume of bags): 15 (450ml) / 25 (270ml) Cooling system: Passive External / internal material: polyethylene Inner container material: Polystyrene COLD LIFE (duration of passive refrigeration) at 32°C outside: up to 96.14h at 43°C outdoors: up to 56.5h Conforme a ADR, RID, IMDG, ICAO-TI, IATA-DGR, Dispositivo medico di classe IIa secondo MDD 93/42 / CEE

Yamato DG-440C Natural Convection Glassware Drying Oven with Sterilization Lamp 92L, 115V Temperatur (more)e Range Ambient +5°C to 70°C Heater Power 1.0 kW Chamber Volume 92L Features - Large window for easy observation - Can be used to store instruments after drying - Highly efficient heat insulation material for both internal and external structure - Adjustable foot for stability on uneven floors - Mobile on casters (DG800C/810C/840C/850C) - Equipped with stainless steel pipe heater and water receiving plate at the bottom - Stainless steel interior, easy to clean and highly resistant to corrosion - DG440C/450C/840C/850C installed with filter at air in-take port, exhaust fan and germicidal lamp for fast drying - Dial setting and digital display of temperature control and timer 92L glassware drying natural convection oven with large observation window for easy observation. Equipped with filter at air in-take port, exhaust fan and germicidal lamp for fast drying. Highly efficient heat insulation material for both internal and external structure. Adjustable foot for stability on uneven floors. Equipped with stainless steel pipe heater and water receiving plate at the bottom. Stainless steel interior, easy to clean and highly resistant to corrosion. Dial setting and digital display of temperature control and timer. Can be used to store instruments after drying. Operating temp ambient +5~70°C. INCLUDED: The Yamato DG-440C Natural Convection Glassware Drying Oven with Sterilization Lamp 92L, 115V includes: - 2 x Shelves w/ Brackets - Water Receiving Plate - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

PS.R1 series balances represent a new standard of precision balances. They feature a new, readable L (more)CD display which allows a clearer presentation of the weighing result. Besides, the display has a new text information line allowing to show additional messages and data, e.g. product name or tare value. New PS.R1 balances like previously designed PS series balances, have pans in two possible dimensions: 128x128 mm or 195x195 mm. Balances with a smaller pan have a draft shield. They were equipped with the system of external mass adjustment. PS.R1 balances feature several communication interfaces: 2 x RS 232, type A USB, type B USB and optional Wireless Connection. The balance may cooperate with computer by means of USB interface supposing a supplementary software has been installed (respective driver). The said driver may be downloaded from RADWAG website – SOFTWARE link or SUPPORT section. The housing is made of plastic, and the pan is made of stainless steel. The balances have a possibility to weigh products out of the pan (under-pan weighing) - the load hangs under the pan. Databases in R Series Balances The information system is based on 5 databases, which allows for several users to work with several products databases, and the registered weighing results can be subject to further analysis. The data is registered in 5 databases: users (up to 10 users), products (up to 1000 products), weighments (up to 5000 weighments), tares (up to 100 tares), ALIBI memory (up to 100 000 weighments). . Quick access to information There is two directions data exchange within the system thanks to a quick USB interface. New balances allow to import and export databases using USB pen drives. Direct access to functions and databases is possible from the level of keyboard: Database – a direct access to databasis Function - a direct access to the basic functions F1 to F4 – programmable function and navigation keys on the menu ALIBI memory The used ALIBI memory is a data secure area and allows to record up to 100 000 weighment records. It ensures security of constant data register in the long time period. Under-pan weighing Weighing instruments purchased after 15th February 2023 will allow under-pan weighing at any time after the purchase. All you need to do is just to order a dedicated hook. THBR 2.0 System Cooperation with THBR 2.0 System for ambient conditions monitoring.

Ohaus EX4202 Explorer Toploading BalanceThe OHAUSEX4202 Explorer Precision Balance with 4200 gram we (more)ight capacity, has newlyoptimized linearity and repeatability specifications and enhanced vibrationfiltering for better balance stability. All Explorer models also come standardwith AutoCal automatic internal calibration. These combined enhancementsimprove accuracy, efficiency, and throughput.A large colortouch-screen display, icon-driven application software that features 14 uniqueapplication modes, and an adjustable angle display make the OHAUS Explorerseries the easiest to use, most advanced balance in its class today.The base andterminal of the Explorer EX4202 separate for maximum flexibility in any workarea. It also has four user-programmable touch free sensors to minimize crosscontamination and button wear. 4200g Capacity 0.01g Readability Platform: 190 x 200mm Large 5.7" full-color touchscreen display with intuitive set-up and application software AutoCal automatic internal calibration for optimized weighing performance 14 application modes, 11 weighing units and 5 display languages for a wide variety of applications 4 programmable touchless sensors for hands-free operation Modular display can be separated from the weighing base Click Here to View Product Video INCLUDED: The Ohaus EX4202 Explorer Toploading Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Motic Panthera TEC POL EPI (Binocular) Features - UC Plan Achromat objectives (strain-free) for FOV  (more)22mm - Transmitted and transmitted/ incident stand options - Transmitted light: LED/HAL light source interchangeable - Integrated focusable/ centerable Bertrand lens - Motic LightTracer: Coded nosepiece & Digital light intensity knob The Panthera TEC POL EPI series fills a last gap in the Panthera family: Polarization microscopes for all material sciences, ready to handle transparent samples like fibers and foils with their inherent birefringence. The Incident light models for opaque materials work out the specific reflectivity (bireflection) of flat surfaces. To extend the application fields, all microscopes carry an intermediate tube with Bertrand lens to analyze the crystal structure and interference figures of gems, precious stones and minerals.INCLUDED: The Motic Panthera TEC POL EPI (Binocular) includes: - 4X/0.1 (WD 30.5mm) Objective - 10X/0.25 (WD 17.4mm) Objective - 40X/0.65/S (WD 0.6mm) Objective - 60X/0.8/S (WD 0.35mm) Objective - Widefield UC-WF10X/22mm with Diopter Adjustment - Dust Cover - Power Cord - Allen Key - Blue Filter - Halogen Bulb - Adjustable Key for Nosepiece - Interference Color Chart - Screws for Metal Extension Support - Operator's Guide Motic Panthera TEC POL EPI (Binocular) SpecificationsOptical systemColour Corrected Infinity Optical System (CCIS®)Observation tubeBinocular head, Siedentopf typeSensor type-Sensor size-Capture resolution-Live display mode (through Wi-Fi)-Live display mode (through ethernet)-Live display mode (through HDMI)-Inclination25º inclinedTrinocular light split-Interpupillary distance48-75mmDiopter adjustmentOn both eyepieces, +/- 4 diopterEyepiecesWidefield UC-WF10X/22mm with diopter adjustmentNosepieceReversed quintuple, coded with single centering holesIntermediate BodyEpi-illuminator LED with rotatable analyzer 360º, Bertrand lens, fixed polarizer and slot for compensatorsObjective classificationPlan Achromatic objectives & CCIS® UC Plan Achromatic (strain-free), DINObjectives4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)Objective mounting threadW 4/5"x1/36" (RMS standard)StageCircular rotating 360º, lockableStage sizeØ160mmCondenserFocusable and centerable Achromat Swing-out Abbe condenser N.A. 0.90/0.13 (strain-free) and rotatable polarizerDiaphragmIris diaphragmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentFine focus precision2µmFocusing stroke25mmUpper limit stopUpper limit stop preset but adjustableFilter holderOn top of the illuminator with fixing capTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlIllumination interchangeabilityHalogen/LED and LED color temperature interchangeabilityIllumination featuresMotic LightTracer: Light memory, sleep mode (auto on-off), nosepiece LED light intensity and mode indicatorTransformerInternalPower supply110-240V (CE)Other featuresUSB 2.0 for external camera powerDimensions LxWxH410x300x395mmNet weight10.4kgComparison of ModelsSpecificationPanthera TEC POL EPI (Binocular)Panthera TEC POL EPI (Digital)Panthera TEC POL EPI (Trinocular)Optical systemCCISCCISCCISObservation tubeBinocular head, Siedentopf typeBinocular head, Siedentopf type with built-in digital cameraTrinocular head, Siedentopf typeInterpupillary distance48-75mm48-75mm48-75mmEyepiecesWidefield UC-WF10X/22mm with diopter adjustmentWidefield UC-WF10X/22mm with diopter adjustmentWidefield UC-WF10X/22mm with diopter adjustmentIntermediate BodyEpi-illuminator LED with rotatable analyzer 360º, Bertrand lens, fixed polarizer and slot for compensatorsEpi-illuminator LED with rotatable analyzer 360º, Bertrand lens, fixed polarizer and slot for compensatorsEpi-illuminator LED with rotatable analyzer 360º, Bertrand lens, fixed polarizer and slot for compensatorsObjectives4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)4X/0.1 (WD 30.5mm), 10X/0.25 (WD 17.4mm), 40X/0.65/S (WD 0.6mm), 60X/0.8/S (WD 0.35mm)StageCircular rotating 360º, lockableCircular rotating 360º, lockableCircular rotating 360º, lockableStage sizeØ160mmØ160mmØ160mmFocus mechanismCoaxial coarse and fine focusing system with tension adjustmentCoaxial coarse and fine focusing system with tension adjustmentCoaxial coarse and fine focusing system with tension adjustmentTransmitted illuminationKoehler Quartz halogen 6V/30W with intensity controlKoehler Quartz halogen 6V/30W with intensity controlKoehler Quartz halogen 6V/30W with intensity control.comparison-table tr td:nth-child(2) { background-color: #fffacd; }DownloadsTechnical Specification Download