DIONEX HPLC System, GP50, AS50, UVD 17OUD Lab

Thermo Finnigan Surveyor HPLC System, Autosampler, PDA Detector & LC Pump This was removed from  (more)a university lab where it was surplus to requirements. The system powers up but has not been tested further at our facility. It is in very good cosmetic condition with minor marks. Included are; ThermoFinnigan Autosampler SurveyorModel: AutosamplerSerial#: 77184Year: 2002 ThermoFinnigan PDA Detector Model: PDA DetectorSerial#: 56847Year: 2002 ThermoFinnigan LC Pump SurveyorModel: Surveyor MS PumpSerial#: 62911Year: 2003

Modules for HPLC DIONEX Ultimate 3000 DIONEX module set: Ultimate 3000 RS Variable Wavelength Detect (more)or VWD-3400RS AS50 Autosampler (AS 50) GP50 Gradient Pump ED50 Electrochemical Detector Wyatt miniDAWN Tristar Laser Light Scattering Photometer with Wyatt Comet WCT-01 Untested equipment

TSP HPLC P4000 + AS3000

Autosampler: Isocratic pump:

Template input incorrectly - Listed as Used and not S/R Varian Cary 500 Scan UV-VIS-NIR Spectrophoto (more)meter with PC and Monitor This system was removed from a university laboratory where it was surplus to requirements. The spectrophotometer powers on, communicates with the PC, and is in good condition with minimal wear. However, multiple error messages are displayed during operation. Therefore, it is listed as Spares/Repair. The previous client has also confirmed that the system was not operational when last used. Error Messages Displayed: - SEQFatal Chopper Failure – Reported during calibration - CCTVis Lamp Failure – Vis lamp has failed; restarting the unit did not resolve the issue, suggesting a replacement may be necessary - CHGVis Source Failure – Reported by the instrument software - NMPDatum Not Found – Re-powering suggested, though the issue persists Software Included (WinUV Folder): - Align - Cary Help - Scan - Simple Reads Additional Components: - Dan PC - Model: Dantum - Serial No.: 428199-1 - Condition: Powers on, good condition with some wear. - Monitor (Lenovo ThinkVision) - Serial No.: VN722039 - Condition: Powers on, great condition with no wear. Spectrophotometer Specifications:- Model: Cary 500 Scan - Serial No.: EL97123060

Do you need a balance that not only determines weight with impressive accuracy, but also performs a  (more)digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of balances: Digital Weighing Auditor Ensures that your balance is ready for use. It enables air buoyancy compensation in real-time. What is more, it informs about the need for a balance inspection or a periodic audit of the balance’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the balance will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – An Innovative Way for the Balance to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the balance on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. Automatic Leveling of the Balance ReflexLEVEL System Instead of manually leveling your scale - level it automatically. The ReflexLEVEL System saves you time and gives you maximum precision in your measurements. Smart Min Weight The balance displays whether the value of the weight you want to weigh is below or above the minimum weight threshold. Fully Antistatic Weighing Chamber Do you have an electrostatic sample that cannot be weighed? The ionizer will neutralize its electrostatic charge. How will you get an even more accurate weighing result? This will be ensured by a special antistatic glass coating that compensates for electrostatic charges on the sample and laboratory accessories. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the laboratory balance which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. - Full data security - Electronic signatures - Validations - Electronic records - Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. Two-point adjustment Adjacency, which takes place at two measurement points instead of one, improves measurement precision over the full weighing range. And what does this mean for you? More accurate measurement. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Additional WD-4/6 LCD display has been designed to connect with automatic scales. The display is equ (more)ipped with a stainless steel housing and LED backlight. It is powered from a balance indicator. Features: Automatic baud rate recognition Screen saver

RMCM-10 robotic mass comparator guarantees the utmost repeatability within 1 mg - 10 g range with th (more)e readability of 0.1 µg. Function of Automatic Mass Standard Dissemination RMCM-5 mass comparator facilitates a complete dissemination process. This is possible thanks to use of the intermediate mass standard magazine, which significantly shortens comparison duration and reduces wear and tear of the transport robot. Real-Time Measurement of Ambient Conditions The RMCM-10 mass comparator comes standard with a top-class thermo-hygro-barometer enabling real-time control of ambient conditions in three locations. The characteristic feature of the RMCM-100 is high readability of pressure, 0.001 hPa, humidity, 0.01 %, and temperature, 0.001 °C. Reliability of ambient conditions measurement carried out using the thermo-hygro-barometer is confirmed by a calibration certificate. A Mass Comparator and a Robotic Transport System in One Compact Device This combination results with: reduction of air drafts and vibrations from a robotic system in the course of comparison, minimised risk of human error, easier maintaining of stable environmental conditions inside the weighing chamber (thanks to a compact device dimensions). Optional Equipment Additional equipment includes a video camera enabling remote preview of comparison process in real time (Internet access required), and RMCS software. The RMCS allows unrestricted monitoring of the comparison process. Remote, real-time preview of comparison process in real time is possible thanks to a video camera. Universal magazine insert shape Mass standard magazine features 120 positions. The RMCM-10 enables comparison of weights of all shapes compliant with OIML recommendations, using just one universal insert.

Gilson F174301 AmpliPur Expert Tips, 10-200uLThe Gilson F174301 AmpliPur Expert Tips, 10-200uL are I (more)SO 8655 compliant and provide a significant value for the money spent. They are manufactured according to the certified Gilson quality standard and preserve your sample integrity. These filter tips protect precious samples and your pipettes from cross-contamination and are designed to fit various pipette brands. AmpliPur Expert Tips are certified DNase- and RNase-free. It makes them the preferred tool for molecular biology applications, supporting you in ensuring the limit of detection of your experiment, resulting in more sensitive nucleic acid quantitation. (Please Note: The Gilson F174301 AmpliPur Expert Tips, 10-200uL are NOT compatible with Gilson P100 Single Channel Pipettes.) INCLUDED: The Gilson F174301 AmpliPur Expert Tips, 10-200uL includes: - 10 Racks of 96 Filter Tips - 3 Year Manufacturer's Warranty