Automatic defrosting function for ST/CHL Pol-Eko

Refrigeration bath KB 08-40 FRYKA Main features: - Refrigeration unit: silent, fully hermetic, seale (more)d, air cooled, low maintenance - Parts of the casing made of stainless steel - Easy to clean: Interior without frames, rounded corners - No electronic controls exposed to vapors - Ram protection ring - Four mounting clamps (M8 threads) at the corners of the tub for attaching support rods - Bathtubs in 18/10 stainless steel

This Mistral Air Compressor Motivair Model - M6-ET was removed from a university lab where (more) it was surplus to requirements. The unit powers up and appears to be running well but has not been tested further. The system has been professionally serviced and is in full working order. It is in good cosmetic condition with some marks from use.

PSS / Ramada Warehouse Shelf Racking with Boards Included are the following; Uprights, which are all (more) 90cm deep. 586cmQty: 6 507cmQty: 5   389cmQty: 5 Beams 278.5cm lengthQty: 226 Boards 134x89.5cmQty: enough for all beam levels. We're happy to supply equal boards to beams (as 2 beams per level and 2 boards per level). Column guards and be included - 1 per upright We are happy to sell as a split purchase or full load Collection only from CF83 3HUWe can forklift load onto a suitable vehicle

Ultracongeladores horizontal Kryotech ULC Series. Temperature range of -60 ºC to -90 ºC. Models avai (more)lable for volumes effective 15 L, 30 L, 80 L, 200 L and 300 L. Capacity for 8, 20, 48, and 144 cryobox 2", respectively. Requires little lab space, reduced consumption, low noise level (<51 dB). A compressor.

Upright ultra-low freezer Thermo Forma 907. Volume 792 L. Range of Temperature of -50 to -86 ºC. A d (more)oor external and 5 internal. Display with microprocessor. Alarm system. Trays and instruction manual. Specifications: 230 V; 50-60 Hz Internal measures AnchxFxAlt cm: 93x68,5x130,8 External measures AnchxFxAlt cm: 118,9x94x197,6 Weight: 444,5 kg

MULTI-HS 15 DIGITAL VELP MAGNETIC STIRRER SAFETY AND RESISTANCE - Warning message on the display whe (more)n the plate reaches 50°C - The Safety Lock function prevents unintentional changes of settings in order to meet all laboratory safety standards. - The VELP CerAlTop ™ top plate is made of aluminum alloy which guarantees temperature homogeneity with excellent heat distribution and high specific power thanks to the circular configuration. A thin layer of ceramic protects the plate from scratches and chemicals and guarantees high resistance to thermal stress and thermal shock. SMART AND SIMPLE USER INTERFACE The LED display is easy to read and thanks to the intuitive icons the operator will always have an eye on the working conditions: - Active heat - Temperature set point - Activating the timer - Automatic reverse option - Lock button Two extremely precise rotary knobs control the temperature and speed setting and to start the heating you need to press the knob; a small detail that exemplifies Velp's utmost attention to operator safety. By touching both knobs simultaneously, it is possible to access the advanced menu for the most suitable configuration of all operating modes. POWER AND PRECISION - The extremely powerful Brushless motors are able to stir from 100 up to 1000 rpm, offering practically unlimited duration over time. The stirring speed is always constant, even when the viscosity changes, thanks to the SpeedServo ™ torque compensation. - The middle button allows you to set the timer for unsupervised work. The Timer can be set from 1 min up to 99 hours and more advanced configurations can be set in the advanced menu. - The Auto-reverse option improves the kinetics by changing the direction of the stirring direction. You can also set the direction change to your preferred time interval. TECHNICAL FEATURES: Stirring position distance: 74 mm. Stirring speed: 100 - 1000 rpm. Speed setting accuracy: 5 rpm. Temperature setting resolution: 1°C. Hot top warning: on display (>50°C). Timer: from 1 min to 99 h: 59 min. Timer setting steps: 1 min. Autoreverse: from 5 s to 99 min-59 s. Autoreverse setting steps: 1 s.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Benchmark Analog Hotplate Benchmark hotplates feature an exceptionally durable, chemical resistant w (more)hite ceramic work surface. Their space-efficient design (8 x 9 in. footprint), makes them ideal for use on crowded benchtops and inside of bio-hoods. Advanced microprocessor controls with convenient turn knobs allow quick, precise adjustment and maintenance of temperature. Safety indicator LED’s on the front panel indicate when the heating function has been activated. With a square 7.1 in work surface, this hotplate is compatible with a wide variety of popular sizes of borosilicate glass beakers, flasks, bottles and other vessels. INCLUDED: The Benchmark Analog Hotplate, 115V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty