Jasco PU-1580 Intelligent HPLC Pump And TP Cell Unit Lab

This Biotage SP1 Flash Chromatography System was removed from a university lab where it was surplus  (more)to requirements. The unit powers up but the monitor is faulty. We connected it to an external monitor and were able to power up the system and access the software. The battery for the motherboard with likely need replacing at some point. The system is comprised of the following modules. 1 x Biotage SPXE 10810016;1 x Ecom Fixed Wavelength UV Detector ;1 x Biotage SP1 System & Monitor.

Dionex UltiMate 3000 With 2 FLM-3100 Flow Manager – Spares/Repairs This system was removed from a un (more)iversity lab where it was surplus to requirements. All included units are in good cosmetic condition and power on. However, due to the following issue, the system is being sold as Spares/Repair: The FLM-3100 displays a valve error. Both valve bodies are missing, and the left-hand valve does not operate. This system comprises the following: Dionex UltiMate 3000 With 2 FLM-3100 Flow Manager 2 x - IonPac CG5A 4 X 50mm Dionex FLM-3100 Flow Manager (top) Dionex FLM-3100 Flow Manager (bottom)

This Antec Scientific Alexys 100 LC-EC System was removed from a university lab where it was surplus (more) to requirements. All the modules power up but have not been tested further at our facility. It is in good cosmetic condition with only minor marks from use. The lab informed us that it was working fine before it was put away about 5 years ago. There are a number of consumables included with it. The system includes; 1x LC 100Part No. 182.0035 1x AC 100Part No. 183.0035 1x LC 110Part No. 193.0035 1x AS 100Part No. 181.0037 1x Decade IIPart No. 171.0035 1x OPRPart No. 184.0035

Amersham Biosciences AKTA FPLC System UPC-900 P-920 INV-907 M-925 Frac-950 This was removed from a u (more)niversity lab where it was surplus to requirements. The unit has been professionally serviced and is in full working order. It will require an interface box to connect it to a PC. It is in good cosmetic condition with minor marks from use. Included are; P-920 -Serial number- 01155727Code number- 18-1164-68 AKTA FPLCserial number- 01160429Code number- 18-6083-20 UPC-900Serial number- 01159938Code number- 18-1128-95 INV-907Serial number- 01158917Code number- 18-1108-40 M-925Serial number- 01160502Code number- 18-1118-89

Shimadzu FVC-10ADvp gradient unit.

Jinan King Rabbit CNC Machine System PSU And Chiller This was removed from a university lab where it (more) was surplus to requirements. The system powers up but has not been tested further. Includes: -HPC PSU -Motion controllerS/N- 13920124 -S&A Industrial Chiller (no cap)Model number-CW3000AG Max RPM- 24000 Model number- RC 4040

This Jouan IGO150 CELLlife CO2 Laboratory Incubator was removed from a university lab where it was s (more)urplus to requirements. The unit powers up and is in good working order. (Temp and CO2 sensor not included). While it was working well with our equipment and in our testing room, it may require calibration to your equipment and lab environment upon installation. It is in reasonably good cosmetic condition with some marks from use. The front right leg is bent, but is level. Internal dimensions 48x58x48cm LWH

Arctiko SUF 500 -86°C Ultra Low Chest Freezer Temperature Setting -40°C / -86°C Volume 13.0 cu. ft.  (more)(368L) Cooling System Single System / Static Features - Single compressor technology that ensures easy maintenance, lower heat dissipation, and low energy consumption - Newly developed noise reduction technology reduces noise level drastically for a more pleasant work environment - Filter less construction prevents dust from blocking the airflow which reduces the unit’s ability to dissipate heat effectively, minimizing maintenance procedure - Capable of reaching -80°C in only 190 minutes - The user friendly XR30CX controller is standard and includes different alarms such as visual, acoustic, power failure, and more - An insulated inner door is featured for providing better recovery time after door openings and optimal temperature stability - Features a premade access port, making it easier to monitor or inspect the unit with external probes - 100% HCFC & CFC free The Arctiko SUF 500 -86°C Ultra Low Chest Freezer is a high capacity, ultra low temperature chest freezer designed to work in high traffic labs. The single compressor technology ensures a quick pulldown, fast recovery time, and high temperature uniformity throughout the compartment, even with multiple door openings. The SUF 500 is capable of reaching -80°C in only 190 minutes and the single compressor technology is specially designed to reduce the number of mechanical components that generate unnecessary heat and noise. The SUF 500 has optimized internal storage for the best overlook. With the included stackable basket and the optional stainless steel front rack storage system, samples will be easily accessible at any time. This freezer also features a premade access port, making it easier to monitor or inspect the unit with external probes. This freezer also features filter less construction, which makes cleaning unnecessary. The evaporator coils are spaced so far apart that dust will not be trapped and obstruct the airflow. With this unique construction, the dust intake is minimal, which eliminates the need for filters entirely saving on maintenance time and cost. INCLUDED: The Arctiko SUF 500 -86°C Ultra Low Chest Freezer includes: - Key for Door Lock - Stackable Basket - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Eppendorf A-4-62 Swing Bucket Rotor with MTP Buckets The Eppendorf A-4-62 Swing Bucket Rotor with MT (more)P Buckets, (Catalog #: 022638041) are in their original box and in new condition. For use with Eppendorf 5810 and 5810R centrifuges. INCLUDED: The Eppendorf A-4-62 Swing Bucket Rotor with MTP Buckets includes: - 4 x Microplate MTP Buckets - Full 6 Months Parts and Labor Warranty Eppendorf A-4-62 Swing Bucket Rotor with MTP Buckets SpecificationsMax Rotational Speed4,000 RPMMax RCF3,200 x gCapacity16 x Microplates 12 x Culture Plates 4 x Deep Well Plates

Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump Ultimate Vacuum <5x10-9 mbar Inlet Conne (more)ction NW40 Pumping Speed Nominal 2,820.00 l/min Features - Combines oil-lubricated ceramic and dry permanent magnetic bearings for enhanced durability - Built-in electronics for streamlined operation and easy integration with control systems - Enhances speed and compression efficiency for a wide range of applications - Allows for in-field replacement of oil cartridges and bearings with minimal tools - Offers standard, high light gas compression, and additional regenerative stage options for specific needs - Provides superior compression performance for various gases - Ensures efficient operation with reduced electrical interference - Magnetic bearings reduce noise and vibration, ensuring a stable vacuum environment The nEXT 85H pumps consist of the turbomolecular pump with a permanently attached controller containing drive electronics. The controller controls the electrical supply to the pump with the exception of standby speed control. It has no manual controls and can only be operated through the logic interface. To operate the nEXT-85 H pump you must connect it to your own control equipment and power supply or alternatively use the Edwards TIC Turbo Instrument Controller or TIC Turbo Controller. nEXT 85H pumps are supllied with an inlet-screen fitted into the centering O-ring for ISO version pumps and into envelope for CF version pumps. nEXT85 pumps with an NW 25 interstage-port are supplied with an inlet-strainer that fits into the interstage-port. The inlet-screen and inlet-strainer protect the pump against damage that would be caused by debris entering the pump. The nEXT 85 H pumps have a vent-port for venting the pump and vacuum system to atmospheric pressure. The pump is supplied with a manual vent-vavle fitted; this can be replaced with a TAV5 or TAV6 solenoid-operated vent-valve. The TAV valve can be directly controlled by the on-board controller. The nEXT pumps have a purge-port: an inert purge gas can be introduced protect the bearing and motor from corrosion. An optional vent-port adapter and purge restrictor can be fitted to the purge-port to control the flow rate of the purge gas and to filter the gas supply. Click Here to View Product Video INCLUDED: The Edwards nEXT85H NW40 NW16 80W Turbomolecular Vacuum Pump includes: - Operator's Manual - 1 Year Manufacturer's Warranty