G1314-60024 Preparative flow cell for VWD

Beckman Coulter MoFlo Astrios EQS Flow Cytometer System & Sterilgard Cabinet This was removed f (more)rom a university lab where it was surplus to requirements. The PC with the system cannot run the software. The software is included but will require a Beckman OEM PC system to run. The unit has the following lasers installed: 1 X 640NM - 106MW.1 x 592NM - 200MW.1 X 561NM - 202MW.1 x 532NM - 150MW.1 x 488NM - 200MW.1 X 405NM - 55MW. The writing is quite faint on the MW output, so the above figures might not be 100% correct. The complete system consists of: 1 x Baker Company SG503HE-BC-INT SterilGARD hood.Manufactured 04/13/2015.The unit has been powered up. 1 x Moflo Astrios EQS Main Unit.The unit has various marks and scratches from general use. It powers up fine. 1 x Moflo Astrios Lower/Laser/Computer Section.The laser & computer system power up fine.

Luminex 200 Multiplex Assy System with Luminex SD & XYP This was removed from a university lab w (more)here it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with marks from use. Included are; Luminex 200Model: 200Serial#: LX10007082403 Luminex XYPModel: XYPSerial#: LXY07085103

BD Accuri C6 FlowCytometer CSampler This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but we were unable to test it further at our facility. It is in excellent cosmetic condition with minor marks. Included additionally are;BD Accuri C6 Software DiskBD CSampler Software DiskDell P1914S Drivers and Documentation DiskBD Accuri Allen key assembly toolBD Accuri C6 Flow Instrument ManualnBD Non slip mat24-tube rack for standard 12 x 75-mm tubes BD Accuri C6 FlowCytometer CSampler Model: C6 BD CSamplerSerial#: 5202Release Date: Feb 2014

Accuri C6 Flow Cytometer Lab This item was removed from a university where it was surplus to require (more)ment. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item has been tested with an in-house 12v power supply. (not included).

Miltenyi Biotec CliniMACS Plus Cell Sorter Separator Lab This item was removed from a university whe (more)re it was surplus to requirement. It is in excellent cosmetic condition and powers on, we are unable to test it further at our facility. Serial No. 002599Manufactured April 2022

The ClonePix FL builds on the success of the Genetix white light ClonePix adding fluorescent imaging (more) capabilities for more intelligent selection. The unique proprietary technology behind ClonePix FL represents a major advance in cell line selection and development, significantly reducing the time and costs associated with new biopharmaceutical product development especially when compared to standard techniques such as limited dilution or cell sorting. Specification: White light imaging- Trans-illumination for imaging low contrast colonies such as adherent monolayers or small colonies in suspension. Epi-illumination for imaging colonies as they are collected Fluorescence imaging- Software-controlled switching between up to 5 excitation /emission filter pairs (we recommend no more than 3 filters be multiplexed for optimal performance) Data tracking- Internal barcode reader for source and destination plates enables data tracking for each run Camera- Integrated 16-bit cooled CCD camera Imaging speed- 6-well microplate: 5 min for 2 wavelengths (standard conditions) Resolution- Standard: 28 micron; Maximum: 1.5 micron Containment- Fully enclosed working environment with Class 100-type, HEPA filtration Source plate type- PetriWell-6 plate, PetriWell-1 plate, Greiner 6 well plate, Nunc 6 well plate, Nunc OmniTray Destination plate type- PetriWell-96 plate, Costar 96 well plate, Greiner 96 well plate, Nunc 96 well plate, Falcon 96 well plate Source plate capacity- 10 plates Destination plate capacity- 10 plates Picking head- 8 x picking pins – each pin independently controlled Picking pin size- Diameter of picking pins is application specific – F1: suspension cells, F2: adherent cells Picking speed > 200 clones per hour Wash bath- Ethanol wash bath, automatically refilled Picking system fluids- 5 L sterile water supply, 5L waste bottle Pin drying- Proprietary halogen pin drying station

Memmert IN55 Natural Convection Incubator 53L, 115V Temperature Range At least 5°C above ambient to (more) +80°C Convection Type Natural Convection Chamber Volume 53 L Features - 53 L (1.8 cu.ft.) stainless steel chamber designed for efficient sample storage - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - 1 Pt100 sensor DIN class A in a 4-wire circuit for precise temperature monitoring - ControlCOCKPIT with SingleDISPLAY and adaptive digital PID-microprocessor controller for accurate control - Natural convection system ensures consistent and even heat distribution throughout the chamber - Electronically adjustable air flap for controlled pre-heated fresh air admixture - Autodiagnostic system with adjustable overtemperature monitor for enhanced safety - Max chamber load capacity of 176 lbs with easy-to-clean, durable stainless steel interior The Memmert IN55 Natural Convection Incubator 53L, 115V is designed to deliver precision and reliability for low-temperature applications in laboratory environments. Featuring a 53 L (1.8 cu.ft.) stainless steel chamber, this incubator provides efficient sample storage and maintains a temperature range from at least 5°C above ambient to +80°C. Equipped with a high-precision Pt100 sensor in a 4-wire circuit, the unit ensures stable temperature control, managed through the ControlCOCKPIT SingleDISPLAY with an adaptive PID-microprocessor for quick adjustments. The natural convection system promotes even heat distribution, while an electronically adjustable air flap allows optimal fresh air intake. The durable, easy-to-clean interior supports a maximum load of 176 lbs, and the built-in autodiagnostic system with an adjustable overtemperature monitor enhances operational safety, making it an ideal choice for research and development, pharmaceuticals, and food technology applications. INCLUDED: The Memmert IN55 Natural Convection Incubator 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

HX7 scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68)  (more)mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

SCILOGEX SCI550-Pro LCD Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, with PT1000 Se (more)nsor & Sensor StandThe SCI550-Pro is one of the most technically advanced hotplate-stirrers in the marketplace. With independent back-lit LCD displays for both heat and stirring functions and PID technology. The SCI550-Pro controls temperature at +/- 1ºC. It also incorporates a DC brushless (spark free) motor for extremely long life and excellent performance. It is widely used in chemical synthesis, physical and chemical analysis, biopharmaceuticals etc. Combining with glass ceramic work plate, brushless DC motor and external temperature sensor, the work plate temperature is optimized up to 550°C.Product Features - Easy-to-read independent back-lit LCD displays for heat and stirring. - Digital speed controlling, max. speed at 1500rpm - Built-in PID controller ensures safe heating of the medium with overheating protection. - Heat only, stir only or heat and stir together functions. - Max. heating plate temperature 550°C - Glass ceramic work plate provides excellent chemical resistant performance and most efficient heat transfer. - RS232 for remote control, providing PC control and data transmission. - Low temperature stability - External temperature control is possible by connecting the temperature sensor (PT1000) with an accuracy at ±0.2°C. - Accessory PT-1000 stand available (built in stand mount) - Electronic speed control for constant speed even during changes in load - Maintenance free DC brushless motor for long life and more stirring power - Two rotating knobs enable easy adjustment of speed and temperature. - High magnetic adhesion - “HOT” warning will flash when the work plate temperature is above 50°C even when the hotplate is turned off. Click Here to View Product Video INCLUDED: The SCILOGEX SCI550-Pro LCD Digital 7 x 7 Magnetic Hotplate Stirrer, ceramic-glass plate, with PT1000 Sensor & Sensor Stand includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Eppendorf 14 x 5ml Adapters, Cat. # 022637509 Eppendorf 14 x 5ml Adapters, Cat. # 022637509 for A-4- (more)44 rotor. This is a 2 piece set, and the adapters are new in the packaging. The Eppendorf 4 x 15ml Adapters, Cat. # 022637606 are designed to be used with an Eppendorf 5804/R or 5810/R Centrifuge. INCLUDED: The Eppendorf 14 x 5ml Adapters, Cat. # 022637509 includes: - Full 6 Month Parts and Labor Warranty