Hewlett Packard HP 6890 Series GC System G1540A , G1513A, G1512AX Lab

This Hewlett Packard 5890 Series II Gas Chromatograph was removed from a university lab where it was (more) surplus to requirements. The unit powers up, and the GC oven is functional. (Digital thermometer not included). We are unable to test further at our facility. It is in good cosmetic condition.

Seaward Stomacher Model: 80 Biomaster Lab System Lab This item was removed from a university where i (more)t was surplus to requirement. It is in very good cosmetic condition and powered on, we are unable to test it further at our facility.

Zeta Programable Guillotine Cutter GCI-800 This item was removed from a university where it was surp (more)lus to requirement. It is brand new in its original packaging. The Item powers on and performs as intended. All items included: 1x Zeta Programable Guillotine Cutter GCI-800S/N: GC1800-190601 1x Set of Allen keys. 1x Philips screwdriver 1x Lubricating oil. 1x User manual.

Varian 4000 GC/MS/MS Gas Chromatograph Included: Varian 3800 / 3380 MS4000 mass spectrometer Without (more) auto sampler Without Software Without a computer Untested equipment A few lines on the screen (see photos)

Heating thermostat from 20 to 200°C, with LCD display and simple programming functions LAUDA ECO sta (more)nds out for its range of features and ease of use. ECO thermostats are available in Silver (LCD display; simple programming) and Gold (TFT color display; complex programming) models, equipped with a mini USB interface as standard. A LAUDA innovation is the pressure flow controller located on the front of the head. This means that flow regulation between inside and outside is possible even during operation. - Monochrome LCD graphic display for simultaneous indication of actual and set values - The circulation pump can be adjusted to six levels - Integrated programmer: 1 program with max. 20 segments - Fully electronic continuous regulator with PID action - Additional key Tmax for overtemperature protection - The ECO heating thermostat line includes transparent baths up to 100°C and stainless steel up to 200°C - The most powerful units are equipped with the energy-saving LAUDA SmartCool system - Variants in 230V; the 50 Hz are also available with natural refrigerants - Convenient operation with softkey cursor - Safety class III for operation with flammable and non-flammable liquids. - mini-USB interface - Pump connections with 13mm plastic nipples as standard LAUDA tank thermostats are equipped as standard with a cooling coil. The E 4 model is also equipped with a lid for the bowl and connections for external applications. A drain cock on the rear side makes changing the heat transfer liquid easy and safe. Grafico delle prestazioni di riscaldamento dei termostati di immersione ECO Silver con vasca in acciaio inox. Performance graph of the pump pressing on the six levels. TECHNICAL VISUALIZATION Display 1 - Status display 2 - Display of the internal or external temperature value (T-int or T-ext) 3 - Soft-key bar Control panel 4 - Soft keys, left and right 5 - Enter key 6 - Cursor keys for Up, Down, Left and Right. 7 - T max key: display and adjustment of the overtemperature switch-off point 1 - USB interface 2 - Upper module receptacle approx. 51 mm x 27 mm for analog, RS 232/485 module, Profibus module and contact module 3 - Lower module receptacle approx. 51 mm x 17 mm for Pt100/LiBus module 4 - Connection socket 75S for control cable of cooling underpart for RE 1050 S 5 - Rating label 6 - Connection socket 51H for power supply between the control head and cooling underpart 7 - Mains connecting lead 1 - Cooling coil connections 2 - Pump connection: outflow and return (as standard only with E 4 S and ET 15 S) 3 - Four feet 1 - Mains connecting lead 2 - Rating label 3 - Bath draining tap 4 - Bath drain point

COMBISTORAGE CS260 - CHEMISAFE CERTIFIED SAFETY CABINET General features: - Entirely made of electro (more)galvanized AISI304 stainless steel with a thickness of 1 to 1.5 mm, cold bent - Gray RAL7035 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C Characteristics of the TYPE 90 COMPARTMENT FOR FLAMMABLE PRODUCTS: - Cabinet insulation with high density rock wool panels and calcium sulphate panels for the compartment dedicated to flammables - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Automatic closing of the doors when the ambient temperature exceeds 50°C - 30 mm thermo-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the cabinet according to the EN14470-1 standard - Air inlet and outlet with certified fire dampers that close the ducts when the temperature exceeds 70 °C according to DIN 4102-6 - Closing and locking system that allows the cabinet doors to be kept open and to close them automatically in the event of an ambient temperature exceeding 50 °C - Anti-spark hinge which guarantees perfect solidity of the doors - Possibility of having a wardrobe with door or drawer according to the models - Lock and key - Equipped with a retention tray with painted steel grid that serves as a shelf Characteristics of the ACIDS/BASES COMPARTMENT: - Internal finish with melamine panels highly resistant to chemical and aggressive vapours - Facility that allows replacement of spare parts if necessary - Opening doors at an angle greater than 110° - Lock and key - Height-adjustable shelf in plastic-coated steel and stainless steel - Cabinet equipped with an integrated ventilation system with external connection or arranged for ventilation via a Ø 100 mm flange - Grounded cabinet - Adjustable leveling feet - ISO 3864: Signs with pictograms - Cabinets certified according to EN14470-1, EN61010 and EN16121 standards - Certified fire resistant 90 minutes Supplied: - Acids/Bases: 1 plastic-coated steel shelf and 1 stainless steel shelf (max load 60 Kg uniformly distributed) - Flammable: 1 retention tank with painted steel grid Optional: - Ventilation and filter - Shelves - Timer - Visual and acoustic alarm system - Glide for moving wardrobes

Selecta Unitronic precision bath. Temperature range from ambient +5 ° C to 99.9 ° C. Stability ± 0.0 (more)5 ° C. Capacity of 27 L. Tank dimensions 20x42x 30 cm (HxWxD).Circulation pump with adjustable flow up to 12 L / min. Temperature control by microprocessor and digital LCD reading. Drain tap. Safety device due to overtemperature. User manual. Precision bath with electronic regulation Selecta Unitronic. <p>

Memmert HPP2200eco Climate Chamber 2140L, 115V Setting Temperature Range (without light, with humidi (more)ty) +5 to +70°C Setting Range Humidity 10 to 90 % rh Chamber Volume 2140 L (75.6 cu. ft.) Features - Spacious 2140 L (75.6 cu. ft.) capacity for ample storage and incubation - Temperature range from +15 to +60 °C with humidity, or 0 to +70 °C without humidity - Precise 0.1 °C temperature control accuracy with dual Pt100 sensors - Humidity adjustable from 10% to 80% RH with external distilled water supply - TwinDISPLAY with PID microprocessor control and high-definition TFT screens - Programmable via AtmoCONTROL software with USB and Ethernet connectivity - AutoSAFETY protection with visual and acoustic alarms for temperature regulation - Stainless steel door with inner glass panes and 2-point compression locking system The Memmert HPP2200eco Climate Chamber 2140L, 115V offers exceptional capacity and control for rigorous storage, incubation, and environmental testing needs. With a spacious 2140-liter interior, this chamber provides a temperature range from +15 to +60 °C with humidity and 0 to +70 °C without humidity, giving precise control over varied storage environments. Dual Pt100 temperature sensors ensure accuracy within 0.1 °C, while humidity control ranges from 10% to 80% RH, supported by an external distilled water supply system and advanced humidification and dehumidification features. Engineered for easy management, the HPP2200eco features Memmert’s TwinDISPLAY with a PID microprocessor and vibrant TFT displays, delivering real-time data at a glance. Program settings via the AtmoCONTROL software over USB or Ethernet for versatile operation, and enjoy peace of mind with Memmert’s AutoSAFETY system, which provides visual and acoustic alarms for over- and undertemperature protection. Built with a durable stainless steel door with inner glass panes and a secure 2-point compression locking system, this chamber meets the high standards required for lab precision and safety. INCLUDED: TheMemmert HPP2200eco Climate Chamber 2140L, 115V includes: - 6 Stainless Steel Grid - Tilt Protection Wall Bracket - USB Drive w/ Software &amp; AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

KNF N920KT.29.18G Diaphragm Pump Ultimate Vacuum 2 mbar (abs.) Maximum Flow Rate 21L/min (1.2 m 3/h (more)) Protection Class IP20 Features - Clean, 100% oil-free operation - High suction speed, particularly in the low vacuum range - Adjustable speed control - Exceptionally quiet - Corrosion-resistant - Maintenance-free The powerful N 920 KT.29.18 G diaphragm vacuum pump uses a series of KNF technical innovations, including a special diaphragm stabilization system that makes it well-suited for all applications requiring high suctions speeds at low absolute pressures, in a compact size. INCLUDED: The KNF N920KT.29.18G Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Benchmark Incu-Shaker Mini Incubator ShakerFeatures - Exceptional temperature uniformity and accurac (more)y - Powerful brushless induction drive designed for years of trouble-free service - Minimized noise and vibration due to the advanced motor isolation system - Temperature control in increments of 0.1°C - Shaking speeds from 30 to 300 RPM - Speed control in increments of ±1 RPM - Horizontally circular 19mm orbit for aeration &amp; mixing - Timer control from 1 minute to 48 hours, or continuous use Precision touch screen control and monitoring of time, shaking speed, and temperature with advanced views for temperature and shaking The included non-slip platform is ideal for a number of vessels such as tissue culture flasks, petri dishes, staining trays, and more Instantly exchange flasks with the MAGic Clamp Platform accessory, featuring a unique magnetic attachment method The Incu-Shaker Mini is the most compact shaking incubator in its class. Despite the remarkably small footprint, a large 11.5 x 9.5 in. work space accepts several platforms and a variety of flasks, tubes and other common vessels. Features a touch screen control over time, speed, and temperature settings. A standard, rubber mat platform is included and is ideal for use with tissue culture flasks, Petri dishes, staining trays and other flat vessels. The convenient MAGic Clamp platform is also available for use with Erlenmeyer flasks and test tube racks. The unique, magnetic attachment method is the easiest way to instantly change between flask clamps of different sizes. INCLUDED: The Benchmark Incu-Shaker Mini Incubator Shaker includes: - 9.5 x 11.5 in Non-slip Rubber Coated Platform - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty