VICI PDDs (pulsed discharge detector) for Agilent GC

Hewlett Packard HP 6890 GC Gas Chromatograph & Agilent 6890 Series Injector This was removed fro (more)m a university lab where it was surplus to requirements. The unit has had the mains power board removed and is sold for spares/repairs. It is in reasonably good cosmetic condition but has some marks from use.

Hewlett Packard Series 6890 GC System with HP 6890 Series Injector This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and the oven works.  It is in good cosmetic condition with minor marks. Accessories 1 x N930-1358 1 x N930-1357 1 x Fused Silica Tube TSP020090 Micromass part - 6028621 1x Merlin Microseal septum replacement Part Number - 310 1 x  Restek Premium non-stick w/Center Guide 50 pack 48 left item No - 27090 GC Liner for HP S/SL 1-Taper w/Wool Part number - AG0-4680 Lot no - P01-C6616 1 x Restek Drilled Cyclo Uniliner Hole near top 4.0mmx6.3x78.5 for Agilent GCs Lot - 824835C Cat - 22980 Supelco Capillary Splitter HP-5890 Packed

This Costech Instruments Elemental Combustion GC Gas Chromatography System  ECS4010 was removed (more) from a university lab where it was surplus to requirements. The item powers on but has not been tested any further. The lab it was removed from did inform us that most of the equipment removed from the particular lab was in working order. The item is mostly in a reasonable, used cosmetic condition but the right side panel is missing and the back panel is loose. There is a manual included.

This Finnigan Trace GC Ultra & AS2000 Autosampler was removed from a university lab where it was (more) surplus to requirements. The unit is in good used cosmetic condition. It powers up fine and the oven heats.The fan is very very noisy. We presume the bearings have gone in it. It also comes with a Thermo Finnigan AS2000 Autosampler and C.U. Controller. The controller powers up. Various cables are also included including a spare fan.

Temperature range: 20 – 100°C Temperature stability: ± 0.02°C Temperature resolution: 0.1°C Pump flo (more)w rate (at 0 bar): 10 l/min Pump pressure (at 0 L): 0.12 bar Heater capacity: 2 kw Dimensions (WxDxH): 170 x 330 x 360 mm Bath opening (WxDxH): 150 x 150 x150 mm Capacity: 4.5 L Weight: 4.0 kg

Manufacturer: CTC Analytics Model: MN 01-00 PAL Power Supply Description: CTC Analytics MN 01 - 00  (more)PAL power supply. Specifications: - Electrical requirements: 100-240V, 120W, 50/60Hz - Environment: 4°C - 40°C constant temperature, < 80% humidity (noncondensing) - Weight: 10 kg Items delivered: - CTC Analytics MN 01-00 PAL power supply- Conection Cable- Power cord Condition: The power supply is in very good cosmetic condition. It is 100% functional tested and ready to be applied.

Medical refrigerator, with glass door, produced by B Medical Systems - Integrated B Medical Systems  (more)multifunction electronics - High quality stainless steel, certified antibacterial, for better longevity and easy hygiene control - High internal volumetric utility, very versatile, thanks to the multiple intuitive guides that allow modularity - Internal modules and tracks fully compatible with other ML / MP models Specific features of the ML 1430 SG model Preset temperature: +5°C Adjustable temperature in 0.1°C increments: +4°C to +15°C Cold / hot temperature alarm limit: +2°C / +8°C Resistance over time (from +5°C to +10°C): 85 min. Climate class (ambient temperature range): SN / ST (+10°C to +32°C) Defrost: Natural Type of refrigerant: R290 Heat emission (Kcal / h): 48 Compressor running time (%): 20

Speed range: 100 – 1400 rpm Max. stirring capacity (H₂O): 20 L Plate dimensions: Ø 145 mm Dimensions (more) (WxDxH): 173 x 277 x 94 mm Weight: 2.6kg

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK&reg; The new, taller and larger MONOBLOCK&reg; enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

Tuttnauer 2540M Autoclave The Tuttnauer 2540M Autoclave is designed to compliment any healthcare fa (more)cility. The bright new easy-to-use panel was designed with the operator in mind. The 2540M autoclave will satisfy all sterilization needs without compromising on quality, safety or reliability. Automatic shut off at the end of both the sterilization and dry cycles. A long life electro polished chamber and door. Double safety locking device prevents door from opening while chamber is pressurized. Drain valve is located on the front, allowing for quick and easy draining of water reservoir. Dual safety thermostat to protect against overheating. Standard unwrapped cycle Hot start: 14 min, Cold Start 30 min. Cycle times are approximate and may vary depending on instrument loads. INCLUDED: The Tuttnauer 2540M Autoclave includes: - 3 Stainless Steel Trays - Power Cord - Operator's Guide - 3 Year Manufacturer's Warranty