Hewlett Packard 5890 Series II Gas Chromatograph Lab

Hewlett Packard 5890 Series II Gas Chromatograph GC System This was removed from a university lab wh (more)ere it was surplus to requirements. All the units power up and are in reasonable cosmetic condition with marks from use. Included are; Agilent 6890 Series Injector Model - 18593BS/N - 3227G07221 Hewlett Packard 7673 Controller Model - 18594B # 206+S/N - 3302G07812 Hewlett Packard 5971A Mass Selective DetectorModel - 5971AS/N - 2950A00496 Hewlett Packard 59822B Ionization Gauge Controller Model - 01S/N - 3996 Hewlett Packard 82937A HP-1B Interface

This Finnigan Trace GC Ultra & AS2000 Autosampler was removed from a university lab where it was (more) surplus to requirements. The unit is in good used cosmetic condition. It powers up fine and the oven heats.The fan is very very noisy. We presume the bearings have gone in it. It also comes with a Thermo Finnigan AS2000 Autosampler and C.U. Controller. The controller powers up. Various cables are also included including a spare fan.

Agilent 7890A GC System This system was removed from a university lab where it was surplus to requir (more)ements. The system is in fair cosmetic condition, with a few marks and scratches. It powers on, but no further testing has been conducted due to the absence of a PC and software. According to the previous owner, there are no known faults, but the system has been out of use for a few years and would likely need recommissioning. Specifications: - Serial No.: CN10809012 - Model: G3440A

VOGTLIN GCM Red-y Compact Mass Flow Meter Model: Vögtlin GCM-C3EA-BN00 Medium: Air/air Measuring ran (more)ge: 0.2-10 Measuring unit: ln/min Accuracy : ±2.0 % end value (range to 200 ln/min) Temperature: 20 °C Pressure inlet: 2 bar a Connection: G1/4″ Inside thread Body material: Aluminum Seals: FKM Power supply: Battery Calibration protocol: with Ref. Pressure : 1013 [mBar] Ref. Temperature : 0 [°C]

Spectrophotometer UV/Vis Agilent 8453 (G1103A). Range wavelength from 190 to 1100 nm. Detector fotod (more)iodoarray. Reading in less than 1 sec. Includes PC with software built-in UV/VisChemstation B4: advanced, biochemistry. Pack dissolution and general. Includes instruction manual. < 1.0 % At 200 nm, solution of 1.2% KCl, scanning white in air, 5s integration time; (EP*method)** < 0.05 % At 220 nm, solution of 10 g/l NaI, scanning of the target in air, a 5-s time ingegración; ( ASTM method) < 0.03 % At 340 nm, solution of 50 g/l NaNO2, escanéo white on air, 5 s integration time. ASTM method Software: UV/Vis Gemstation B04

Memmert IN30plus Natural Convection Incubator 32L, 115V Setting Temperature Range +20 to +80°C Conv (more)ection Type Natural Convection Chamber Volume 32 L (1.1 cu.ft.) Features - 32 L (1.1 cu.ft.) stainless steel chamber for efficient and durable sample storage - Precise temperature control with an adjustable range from +20°C to +80°C, ensuring consistent performance even 5°C above ambient - Dual Pt100 sensors in a 4-wire circuit deliver reliable monitoring and safety redundancy - Intuitive ControlCOCKPIT with TwinDISPLAY and adaptive PID-microprocessor controller for enhanced user experience - Natural convection for uniform temperature distribution, perfect for sensitive applications - Electronically adjustable air flap provides optimized pre-heated fresh air admixture for sample protection - Maximizes productivity with a chamber load capacity of 132 lbs, supporting heavier samples - Built-in AutoSAFETY and autodiagnostic systems ensure worry-free operation and advanced protection The Memmert IN30plus Natural Convection Incubator 32L, 115V offers precise and reliable temperature control for sensitive sample incubation. With a setting temperature range of +20°C to +80°C and working capability 5°C above ambient, this compact 32 L stainless steel chamber is ideal for a variety of laboratory needs. Equipped with dual Pt100 sensors in a 4-wire circuit, it ensures accurate monitoring and safety through redundancy. The TwinDISPLAY ControlCOCKPIT with an adaptive PID-microprocessor controller provides intuitive user control, while the natural convection system ensures uniform temperature distribution throughout the chamber. Designed for efficiency and user convenience, the incubator features an electronically adjustable air flap for the precise admixture of pre-heated fresh air. With a maximum chamber load of 132 lbs, it supports high-capacity sample handling. The Memmert IN30plus also includes advanced safety features, such as AutoSAFETY, an overtemperature monitor, and an autodiagnostic system, ensuring continuous and secure operation. This high-performance incubator is a dependable solution for labs seeking consistent results and easy operation. INCLUDED: TheMemmert IN30plus Natural Convection Incubator 32L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Stainless Steel HRP.H Platform Wherever high readability and precision are important. Wherever good  (more)repeatability in harsh industrial conditions matters. Stainless Steel HRP.H Platforms are the ideal solution for any type of industry. Repeatability that cannot be repeated by others Stainless Steel HRP.H Platforms have a built-in internal adjustment system. Automatic internal adjustment guarantees the best quality of work and repeatability of results. You save time and avoid the inconvenience of manual adjustment. Unbreakable Stainless Steel HRP.H Platforms feature a modern electromagnetic mechanism design in a sealed steel housing and overload protection. The use of stainless steel for the pan guarantees you a long life of the platform. Fearless of its contact with moist objects or accidental splashing. Stainless Steel HRP.H Platforms are distinguished by a high degree of protection IP 67. For an additional charge we will make HRP platforms in Ex version, but in order for the device to work in explosive areas, you need to supply the PUE HX5.EX terminal. Use the potential Stainless Steel HRP.H Platforms work with one of two weighing terminals: PUE HY10 or PUE 7.1. The terminals&rsquo; software enables you to archive your work results, ensures data safety, and allows the platforms to work with powerbanks from our offer. In turn, you will select appropriate antivibration tables for the platforms, and thus increase the readability of your measurements.

KNF UN811KV.45P IP20-T Diaphragm Pump Ultimate Vacuum 100 mbar Maximum Flow Rate 13L/min (.78 m3/h) (more) Protection Class IP20 Features - Clean, 100% oil-free operation - Corrosion-resistant - Vacuum gauge and regulator for simple, convenient control - Small footprint - Can handle wet vapors without damage - Maintenance-free The KNFUN811KV.45P IP20-T Diaphragm Pump has an extremely small footprint with biguse. It features a PTFE-coated diaphragm, making it ideal for aggressive orcorrosive gasses &amp; vapors. With a flow rate of 13L/min, and an ultimatevacuum or 75 torr, the KNF UN811KV.45P IP20-T Diaphragm Pump is a compact,powerful, fast &amp; reliable vacuum, made for clean results. This pump is 115V. INCLUDED: The KNF UN811KV.45P IP20-T Diaphragm Pump includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Maximum temperature: 100°C Temperature stability: ±0.2°C Shaking frequincy: 20 – 200 rpm Shaking str (more)oke: 15 mm Internal dimensions (LxWxD): 300 x 500 x 180 mm Capacity: 22 L Dimensions (LxWxH): 350 x 700 x 260 mm