Thermo Orion EZ Flash II GC Separation Upgrade

This was removed form a unuiversity lab where it was surplus to requirements. The unit did not power (more) up in testing. We are advised it has a board fault. It is sold for spares/repairs.

Hewlett Packard Series 6890 GC System with HP 6890 Series Injector This was removed from a universi (more)ty lab where it was surplus to requirements. The unit powers up and the oven works.  It is in good cosmetic condition with minor marks. Accessories 1 x N930-1358 1 x N930-1357 1 x Fused Silica Tube TSP020090 Micromass part - 6028621 1x Merlin Microseal septum replacement Part Number - 310 1 x  Restek Premium non-stick w/Center Guide 50 pack 48 left item No - 27090 GC Liner for HP S/SL 1-Taper w/Wool Part number - AG0-4680 Lot no - P01-C6616 1 x Restek Drilled Cyclo Uniliner Hole near top 4.0mmx6.3x78.5 for Agilent GCs Lot - 824835C Cat - 22980 Supelco Capillary Splitter HP-5890 Packed

Reason for return - Investigate faults and re-list accordingly: - We received the item with a cracke (more)d glass piece to the photoionization detector. We replaced it with a piece that was provided. - We piped the system with N2 carrier gas and gas lines carrying product to the inlet of the GC. We turned on the switch to the Photoionization detector, under high sensitivity, and can visibly see it turn on. The source is aligned. The detector is aligned.  - We programmed the event on the software to turn the valve of the 10-way valve accordingly to enable the carrier gas to bring the product through the GC. - We introduced acetone via the sample loop (inlet gas) - we saw no peaks. We introduced acetone via injection - we saw no peaks.  - I leaked checked the piping including within the detector - no issues. I checked the point of outlets to make sure flow is continuous too - no issues. - The mechanism of the valve turning - it made a cranky sound, and I am not convinced it is turning the valve.  - There may be two issues. I had figured it was the valve so I tried injecting acetone directly into the line, but we could not see any peak of acetone. (Issues with the detector?) I am not sure if the valve's squeaking/cranky sound implies it is turning but there might be an issue here too. This SRI 8610C GC Gas Chromatograph System was removed from a university lab where it was surplus to requirements. The unit powers up but we were unable to test it further at our facility. The lab did confirm however, that is in good working order. It is in very good cosmetic condition with only very minor marks from use.

Hewlett Packard HP 6890 GC Gas Chromatograph And Injector This item was removed from a university wh (more)ere it was surplus to requirement. The Hewlett Packard HP 6890 is in reasonably good cosmetic condition and powers on, we are unable to test it further at our facility. The lab confirmed the system was in good working order prior to removal.

Memmert UN110PA Natural Convection Paraffin Oven 108L, 115V Setting Temperature Range +20°C to +80 (more)°C Setting Temperature Accuracy 0.1 °C Chamber Volume 108 L (3.8 cu. ft.) Features - Internal volume of 108 L (3.8 cu. ft.) - Temperature range from +20°C to +80°C, with working range at least 5°C above ambient - Precise temperature accuracy of 0.1 °C using dual Pt100 sensors - Control panel includes TwinDISPLAY with two high-definition TFT-color displays - Programmable with AtmoCONTROL software via USB or Ethernet interface - AutoSAFETY system with integrated over- and under-temperature monitor and alarm - Easy-to-clean stainless steel interior, reinforced by deep-drawn ribbing and large-area heating on four sides - Maximum chamber load of 386 lbs. (175 kg) with five shelves The Memmert UN110PA Natural Convection Paraffin Oven 108L, 115V is crafted for precision in heating and reliability, ideal for laboratories requiring consistent temperature control for paraffin-based applications. With a spacious 108 L (3.8 cu. ft.) capacity, this oven provides ample room for versatile lab applications. Its advanced natural convection system delivers even heat distribution within a temperature range of +20°C to +80°C, and the dual Pt100 sensors in a 4-wire circuit offer an impressive 0.1°C temperature accuracy, ensuring reliable sample integrity and uniform heating across the chamber. This oven features Memmert's TwinDISPLAY control panel, equipped with two high-definition TFT color displays that allow users to easily monitor and adjust settings. AtmoCONTROL software provides additional functionality, enabling precise programming, management, and data transfer via USB or Ethernet. Integrated safety functions include AutoSAFETY, with over- and under-temperature monitoring, and visual and acoustic alarms, offering reliable performance and protection. The oven’s nearly gas-tight, stainless steel interior is reinforced and easy to clean, making it an efficient, durable choice for labs focused on maintaining high standards of accuracy and safety. INCLUDED: TheMemmert UN110PA Natural Convection Paraffin Oven 108L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Frame intended for 4-load-cell powder-coated scales C6, that are to be embedded in the ground.

This set is the perfect solution for laboratories and institutions requiring the highest precision.  (more)These cylindrical mass standards are made from the highest quality materials, ensuring excellent stability and resistance to environmental changes. Product Features: Highest class of accuracy: Class E1 is the highest standard of accuracy, making these standards ideal for calibrating precision measuring instruments. Cylindrical shape: The cylindrical shape of the standards ensures ease of handling and precise placement on weighing platforms. Wooden packaging: The standards are delivered in an elegant wooden box, which ensures their safe storage and transport. Set includes: 9 mass standards, 1 tweezer. Applications: Calibration and verification of scales: Class E1 standards are ideal for calibrating and verifying precision analytical and laboratory scales. Metrological laboratories: The standards are indispensable in metrological laboratories where the highest measurement precision is required. Research andiIndustrial institutions: They are used in research and industrial institutions where maintaining the highest standards of accuracy is necessary. By choosing the E1 class mass standard set from RADWAG, you invest in reliability, precision, and durability, which translates to excellent quality in your laboratory work.

Thermo Scientific 75003181 Swing Bucket Rotor, TX-400 The Thermo Scientific 75003181 Swing Bucket Ro (more)tor, TX-400, is a high-performance centrifuge rotor designed for use with several Thermo Scientific centrifuges, including the Sorvall Legend X1, Sorvall ST 16, Multifuge X1, Megafuge 16, and SL 16. With a maximum capacity of 4 x 400ml, this rotor allows for efficient processing of high volumes of samples. The swing bucket design allows for easy loading and unloading of samples, and the rotor's compatibility with multiple centrifuges makes it a versatile solution for laboratories with a range of centrifuge models. With a maximum speed of 5,000 RPM and a maximum RCF of 4,696 x g, the Thermo Scientific 75003181 Swing Bucket Rotor, TX-400, is capable of medium-speed separations, making it ideal for a wide range of applications, including molecular biology, biochemistry, and clinical research. Please Note: Adapters are NOT INCLUDED with these buckets, please inquire. INCLUDED: The Thermo Scientific 75003181 Swing Bucket Rotor, TX-400 includes: - 75003181 TX-400 Swing Bucket Rotor - Set of 4 x 75003655 Buckets - Full 1 Year Parts and Labor Warranty Thermo Scientific 75003181 Swing Bucket Rotor, TX-400 SpecificationsMaximum Speed5,000 RPMMaximum RCF4,696 x gMaximum Capacity4 x 400mlMaximum Radius16.8 cmCentrifuge CompatibilityThermo Scientific Sorvall Legend X1, Sorvall ST 16, Multifuge X1, Megafuge 16 & SL 16 Centrifuges

Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V Chamber Volume (more) 76L Sterilization Temperature Range 105ºC to 135ºC Chamber Dimensions 14.3 x 28.7 in(36.4 x 73.0 cm) Features - Automatic Lid Opening and Closing Button replaces a foot pedal. - Safety Interlock senses pressure and temperature and prevents lid from opening during a cycle, when the chamber is pressurized, and when the high temperature can cause boil over. - Programmable Auto-Start for running a cycle from 1 to 99 hours later and time for air removal before sterilization. - Large (15 liters) / Efficient Steam Condenser ensures no steam exhausts into the lab. The HG-113 and HG-133 incorporate a radiator for this. - Over-Flow Lamp indicates that the drain bottle is full and ready to be emptied. - Built-in Cooling Fan for faster post-sterilization cooling and shorter completion time. - Selectable Rate of steam venting after sterilization. - Twelve Programs Cycles can be stored. - Large Control and Display Panel improves functionality and shows the progress of the sterilization cycle. The Hirayama HICLAVE HG-80 is an advanced 85L floor-standing autoclave designed for efficient and safe sterilization. It features an automatic lid opening button to replace the conventional foot pedal and an automatic lid closing button for convenience. Its safety interlock prevents the lid from opening during cycles, ensuring safety when the chamber is pressurized or at high temperatures. The programmable auto-start can delay the start of a cycle by 1 to 99 hours. A large and efficient 15-liter steam condenser prevents steam from exhausting into the lab, complemented by a built-in cooling fan for rapid post-sterilization cooling. Users can select the rate of steam venting post-sterilization and program the air removal time before sterilization begins. Up to twelve program cycles can be stored for easy recall.The HG-80 boasts a large control and display panel, enhancing functionality and cycle progress visibility. Specifications include a chamber size of 76 liters (14.3" x 28.7"), a temperature range of 105°C to 135°C, a sterilization timer from 1 to 300 minutes, and an agar warming range maintainable from 45°C to 60°C for up to 24 hours to prevent coagulation. Additional features include a programmable air removal timer, selectable steam venting rates, and customizable temperature settings for lid interlock release for increased safety and flexibility. The unit is equipped with comprehensive safety features, including a circuit breaker with GFCI, low-water power cut-off, over-temp power cut-off, over-pressure power cut-off, safety valve, and a sensor for improper lid closing. The autoclave comes with a 15-liter water tank for the steam condenser and a 2-liter drain water bottle. It operates on 208/220/240V, 50/60 Hz, single-phase power, with a consumption of 3.8 kW, and ships at a weight of 255 lb (116 kg).INCLUDED: The Hirayama HICLAVE HG-80 Floor-Standing Autoclave with Automatic Lid, 85L, 208/220/240V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty