Eppendorf 5810 R Refrigerated Centrifuge Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

Angular rotor for centrifuge Nr.12024-H SIGMA 15300 rpm 24X1.5 / 2ml For use with: Sigma 1-15PK, Sig (more)ma 1-15P, Sigma 1-16, Sigma 1-16K With lid

Separating substances at medium rotational speeds: IKA G-L is the ideal midi centrifuge for all type (more)s of separation processes such as those found in molecular biology. It can be used with standard 1.5/2 ml vessels. The cover opens automatically at the press of a button. Capacity: 12 x 1.5/2.0 ml Permitted density: 1.2 kg/dm3 Centrifugal acceleration: 16500 G Speed range: 800 – 15700 rpm Timer: yes Timer display: 7 segment LED Unbalance sensor: yes Quick stop: yes Cover opening: automatic Dimensions (WxHxD): 200 x 140 x 280 mm Weight: 3.9 kg

This Sanyo MSE Harrier 18/80 Refrigerated Centrifuge was removed from a university lab where it was  (more)surplus to requirements. The unit powers up and is in reasonably good cosmetic condition with marks from use. It is in full working order. The rotor spins up to 6000rpm and the refrigeration works and has been tested at 4˚C and -9˚C. MSE Rotor 43124-141Max RPM - 6000 4 x Buckets4 x Yellow Adaptors hold 1 x 50ml tube each

Hermle Z327-K Refrigerated Centrifuge Speed Range 200 to 18,000 RPM Maximum Capacity 4 x 200ml Tempe (more)rature Range -20°C to 40°C Features - Maintenance-free induction drive - Microprocessor with large LCD display - Motor driven lid lock - Automatic radio-frequency rotor identification system (RFID) with over speed protection, immediately upon rotor insertion - Active imbalance identification and cut-off (rotor specific) - CFC-free refrigeration system (Z327-K) - A large variety of rotors and accessories - Audible signal at the end of each run with several melody options - Noise level under 63 dBA at max. speed - Manufactured according to international safety regulations, i.e. IEC 61010 - Rotor exchange is easy to handle - Stainless steel chamber Both the Z327 and the refrigerated Z327-K offer a wide assortment of rotor options (up to 19), making them ideal for a wide variety of research applications. Rotor exchange between swing out, micro, or high-volume fixed angle rotors is very simple and can be done in a matter of seconds. The Z327-K features rear mounted refrigeration system, optimized for saving space on the lab bench at only 40 cm wide! Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z327-K Refrigerated Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Hermle Z167M Microcentrifuge, includes 18 x 1.5/2.0ml rotorThe Z167-M Microcentrifuge is a powerful, (more) compact, easy-to-use high speed microcentrifuge for labs looking to save valuable bench space, but not compromise on speed and power.

Benchmark MyFuge12 Mini Centrifuge Unlike traditional mini centrifuges, the new MyFuge 12 eliminates (more) the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor is all that is required for running 12 microtubes and/or 4 PCR strips. With a fixed speed that produces 2,000 x g, this centrifuge is perfect for quick spin downs. Simply close the lid and the unit quickly ramps up to 5,500 rpm. Open the lid, and the rotor quickly decelerates for removal of samples. At just 5.5 inches wide and less than 4.5 inches tall, the MyFuge 12 truly is a personal microcentrifuge with unmatched capacity and flexibilty. INCLUDED: The Benchmark MyFuge12 Mini Centrifuge includes: - COMBI-Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Perkin Elmer Janus Automated Workstation with Air Science Purair Advanced Ductless Fume Hood This sy (more)stem was removed from a university laboratory where it was surplus to requirements. It has been professionally serviced and deemed to be in full working order, a brief summary of the report is below: The workstation powers on, initializes successfully, and is in working order. Motion checks for the Varispan, barcode reader, gripper, Peri pump, and syringe pumps were completed without errors. The X and Y rails, as well as the gripper Z worm drive, have been cleaned and lubricated. Tip pick-up and liquid level sensing could not be verified as no tips or system liquid are included. The unit is currently secured with shipping clamps in place. There is no Software included with this system. The system is housed within an Air Science Purair Advanced Ductless Fume Hood, which powers on with both light and airflow functioning. Specifications: - Workstation Part No.: AJL8G01 - Workstation Serial No.: DG11118582 - Manufacture Date: November 2011 - Last Service: 06-12-2022 Fume Hood: - Model: Purair P30 - Serial No.: P90786 - Internal Dimensions: L173 W109 H116 cm - Last Service: 09/08/2022 Accessories: - Box of Plate Holders. - Various Cables. - 2 x Waste Bottles. - Waste Bin The system is in reasonable used cosmetic condition.

Hersteller: Duran Modell: Exsikkator Vakuumfest Klarglas mit NOVUS NS-Tubus im Deckel, mit Hahn, mit (more) Planflansch, mit Exsikkator-Einsatz aus Porzellan und Trocknungsmittel (Silica Gel) P/N: 9.042 148 Beschreibung: Duran Exsikkator mit NOVUS NS-Tubus im Deckel besitzt Hahn, Planflansch, Exsikkator-Einsatz aus Porzellan und Trocknungsmittel (Silica Gel). Die Einzelteile sind vakuumfest (DIN 12491). Anwendungen: - Trocknen feuchter Produkte- Aufbewahrung feuchtigkeitsempfindlicher Substanzen Technische Daten: - Typ: NOVUS- Höhe: 420 mm- Tubus: NS 24/29- DN: 300 Lieferumfang: - Duran Exsikkator mit Planflansch - Exsikkator-Einsatz Lochplatte aus Porzellan- Trocknungsmittel (Silica Gel) Der Exsikkator ist in einem sehr guten Zustand und 100% auf Funktion geprüft.

Unlike conventional spectrophotometers the Agilent 8453 does not suffer from ambient false light. Th (more)e open sample area makes it easier to access for cuvette handling and to connect tubing to a flow cell or thermostatable cell holder. The spectrophotometer is shipped with the standard single- cell holder. Standard and accessory cell holders can be removed and replaced in seconds with few or no tools. The light source for the UV wavelength range is a deuterium lamp with a shine- through aperture. As a result of plasma discharge in a low pressure deuterium gas, the lamp emits light over the 190 nm to approximately 800 nm wavelength range. The light source for the visible and SWNIR wavelength range is a low- noise tungsten lamp. This lamp emits light over the 370 nm to 1100 nm wavelength range.

This ZEISS Stemi 2000 Microscope was removed from a university lab where it was surplus to requireme (more)nts. The unit is in working order and Zoom is fully operable, we are unable to test it further at our facility. It is in reasonably good cosmetic condition but has some marks from use.

Heidolph 036110232 Hei-PLATE Mix 'n' Heat Ultimate Hotplate Stirrer, 145mm Plate The Heidolph 036110 (more)232 Hei-PLATE Mix 'n' Heat Ultimate Hotplate Stirrer, 145mm Plate paves the way for future-oriented working practices: thanks to its equipment with numerous interfaces, it meets all requirements for digitalization and network. The RS232 and USB B interfaces allow control via our Hei-Control software, free of charge, as well as our Hei-PROCESS solution. With the LAN interface, you can directly integrate the device into a network, whereas the USB A interface located at the front allows data logging via USB stick. Use the USB C interface and combine the magnetic stirrer with the electric Heidolph Lab Jack to work even more comfortably and securely. For controlling the temperature, you can choose between three heating modes: FAST for a particularly quick heating, as well as PRECISE and PRECISE+ for a particularly exact control of your target temperature without overshoot - this is how sensitive samples are optimally protected. Therefore, the device is compatible with the temperature sensor Pt1000 as well as the double sensor Pt1000 that allows the measurement in your sample and in the bath liquid simultaneously. The possibility to program ramps and to create profiles gives you full control and increases the precision and reproducibility of your experiments. For the stirring speed, there is a three-stage setting (start-up behavior). Furthermore, you can set the rotational direction of the magnetic stirring bar and benefit from the automatic stir bar detector. As a result, your sample is optimally stirred at any time, even when there are irregularities while stirring. This magnetic stirrer is equipped with the most important safety features. The large safety distance between the heating plate and the control panel, as well as the visual residual heat indicator at temperatures 50°C, protect against burns. The patented Kera-Disk® plate made of anodized aluminum is chemical-resistant, scratch-resistant and has a diameter of 145 mm. This unique size makes it suitable for use with many accessories and samples on a small footprint. Moreover, the material used allows the fastest heating times. Click Here to View Product Video INCLUDED: The Heidolph 036110232 Hei-PLATE Mix 'n' Heat Ultimate Hotplate Stirrer, 145mm Plate includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 10 Year Manufacturer's Warranty

Gilson PIPETMAN M Multichannel P12x300M BT Connected Pipette PIPETMAN M Connected is a Bluetooth ena (more)bled electronic pipette that offers accuracy and precision in both standard and repetitive pipetting modes. Requiring virtually no pipetting forces to aspirate and dispense samples, the PIPETMAN M Connected Pipettes help reduce pipetting fatigue and increase pipetting efficiency. The pipette interacts in real-time with TRACKMAN Connected, making planning and executing pipetting protocols faster, easier, and more reliable. The PIPETMAN M Connected Pipettes are available in 20 models covering a volume range from 0.5 µL to 10mL in single channel configurations, and 0.5 µL to 1200 µL in multichannel configurations. Accurate and Precise PipettingThe motorized piston allows for high pipetting reproducibility and accuracy in all modes. Associated with TRACKMAN Connected and its PipettePilot application, the PIPETMAN M BT Connected Series reduces the risk of human error by transferring verifiable pipetting parameters and commands in the pipette.Increased FunctionalityThe intuitive interface has five pipetting modes for a larger number of applications: pipette, repetitive, mix, reverse, and custom. Create and transfer up to 10 custom protocols from the PIPETMAN M Connected Software into your pipette. Bluetooth connection enables communication with TRACKMAN Connected and helps guide you through your protocol telling you where, when, and how much to pipette with real-time interactions.Simple and Comfortable to UseAspirate and dispense with one click of the push button and eject tips with ease. The lightweight and ergonomic design rests comfortably in your hand for maximum pipetting comfort.CLICK HERE TO SHOW GILSON PIPETTE COMPARISON TABLE INCLUDED: The Gilson PIPETMAN M Multichannel P12x300M BT Connected Pipette includes: - 5V Power Supply with AC Adapter and Cable - Four Battery & Ejector Tags - Manufacturer's Documentation - Operator's Guide - 2 Year Manufacturer's Warranty