Gilson PIPETMAN M Multichannel P12x300M BT Connected Pipette

OMNITIP™ BT 1000 µl tips for pipettes are high quality laboratory accessories designed f (more)or precision pipetting. Designed with efficiency and convenience in mind, they are an indispensable tool for everyday laboratory work. Capacity: 1000 µl Colour: blue Set contains 250 tips in a plastic bag with a zipper closure Application: - precise dispensing of biological samples, - accurate pipetting of medicines and medical solutions, - preparing and transferring chemical solutions, - an indispensable tool in experiments requiring precise dosing.

XA100 pipette calibration adapter enables calibration and/or verification of piston pipettes by mean (more)s of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 100 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

XA100 pipette calibration adapter enables calibration and/or verification of piston pipettes by mean (more)s of a gravimetric method using the XA analytical balence. Set content: base weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Vessel capacity: 100 ml Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

Gilson MyPIPETMAN Select Multichannel P12x20, 2-20 uL PipetteFeatures - Designed to be ergonomic, sa (more)fe, and reliable while remaining lightweight and well-balanced - Elegant design with textured effect for better grip - Built-in ejection system with an integrated lever provides reduced tip ejection forces compared to direct ejection systems - Trilock volume-locking system enables users to choose different positions when setting the volume - Fully autoclavable without disassembly for maximum convenience and protection from contamination - Complies with the requirements of the ISO 8655 standard - Volume range of 2 to 20 uL - 3 Year Manufacturer's Warranty

Application: Automatic mass comparator AK-4/100 series is intended to automatic determination of wei (more)ghts mass deviations with operator’s activity limited to the minimum. The comparator enables determining deviations of three tested weights in a single cycle. AK-4/100 is designed to compare weights from 10 g to 100 g. The instrument is commonly applicable in mass measuring laboratories, and particularly in certification units for weights classes E and F. Design and functionality: The supervising part of the mass comparator is a digital module which cooperates with a controller of instrument’s mechanical components. The digital module and the automatic loader are located in mass comparator’s weighing chamber. The instrument is operated by means of digital display which is plugged to mass comparator’s controller. The supervising elements are not integrated with mass comparator’s mechanical parts, thus enabling separation of instrument’s weighing chamber from ambient conditions influence.

Equipped with a 35 turn glass coil. Max. Temp. 60 °C

Hersteller: Molecular Devices Modell: SpectraMax M2e Beschreibung: Die SpectraMax® M2 und M2e System (more)e von Molecular Devices sind Multidetektions-Mikroplatten-Reader mit Doppelmonochromatoren, Dual-Mode-Küvettenanschlüssen und Top- und Bottom-Reading-Fähigkeit (Top-Reading nur beim M2). Detektion Modalitäten umfassen Absorption (UV-Vis Abs) und Fluoreszenzintensität (FI). Endpunkt, kinetisches, Spektrum- und Area-Well-Scanning Lesearten und der PathCheck® Sensor ermöglichen die Durchführung homogener und heterogener Mikroplatten-Assays in einem flexiblen System einem flexiblen System durchzuführen. SpectraMax M2 Reader ermöglichen eine einfache Umstellung und Optimierung von Assays mit sehr niedrigem Durchsatz auf Assays mit mittlerem bis hohem Durchsatz, schnellere, präzisere Ergebnisse und Einsparungen bei den Reagenzien. Darüber hinaus können kombinierte Absorptions- und Fluoreszenzintensitäts-Assays mit einem einzigen Lesebefehl durchgeführt werden. Kernmerkmale: - Multi-Detektions-Fähigkeit - Top- und Bottom-Read (nur M2e) - Dual-Mode-Küvettenanschluss - Zwei Monochromatoren - PathCheck und Well-Volumen-Sensor - Validierung von Gerät und Software - Roboter-kompatibel Technische Daten: Absorptionsphotometrische Leistung   Wellenlängenauswahl: Monochromator durchstimmbar in 1-nm-Schritten Wellenlängenbereich: 200-1000 nm Wellenlängenbandbreite: ≤ 4,0 nm Wellenlängengenauigkeit: ±2,0 nm Wiederholbarkeit der Wellenlänge: ±0,2 nm Photometrischer Bereich: 0-4,0 OD Photometrische Auflösung: 0,001 OD Photometrische Genauigkeit (Mikroplatte): < ±0,006 OD ±1,0%, 0-2 OD Photometrische Genauigkeit (Küvette): < ±0,005 OD ±1,0%, 0-2 OD Photometrische Genauigkeit: < ±0,003 OD ±1,0%, 0-2 OD Ebenheit der Grundlinie: < 0,001 OD Streulicht: < 0,05% bei 230 nm Fluoreszenzphotometrische Leistung   Duale Monochromatoren: Schrittweite von 1 nm EX Wellenlängenbereich: 250-850 nm EM Wellenlängenbereich: 360-850 nm Wellenlängenbandbreite (EX, EM): 9 nm Optimierte Top-Read-Empfindlichkeit: 5 pM (Fluorescein) in 96 Vertiefungen Top-Read garantierte* Empfindlichkeit: 15 pM (Fluorescein) in 96 Kavitäten Zeitaufgelöste Fluoreszenz (Sekundärmodus)   EX Wellenlängenbereich: 250-850 nm EM Wellenlängenbereich: 360-850 nm Datenerfassung: 50-1450 µsec. in 200 µsec.-Schritten Garantierte Empfindlichkeit: 7 pM Eu-Chelat Lumineszenz (sekundärer Modus)  Wellenlängenbereich (M2): 360-850 nm Garantierte Empfindlichkeit: 50 fM alkalische Phosphatase Allgemeine photometrische Leistung  Plattenformate: 6, 12, 24, 48, 96, 384 Vertiefungen Lichtquelle: Xenon-Blitzlampe (1 Joule/Blitz) Detektor: Photomultiplier-Röhre (PMT) Lesezeit** 96 Vertiefungen: 384 Vertiefungen: Abs 18 Sek., FI 15 Sek. Abs 49 Sek., FI 45 Sek. Schüttelzeit: 0 bis 999 Sekunden Temperaturkontrolle: Umgebungstemperatur +4°C bis 45°C Temperaturgleichmäßigkeit: < 1°C bei 37°C Sollwert Temperaturgenauigkeit: ±1°C bei 37°C Sollwert Allgemeine Spezifikationen   Leistungsaufnahme: < 125 Watt Leistung: 100-240 Vac, 3 A, 50/60 Hz Abmessungen: 23x16x9 cm Gewicht: 35lbs Lieferumfang: - SpectraMax M2e - Bedienungsanleitung als PDF via E-Mail Das Gerät befindet sich in einem absoluten Top Zustand und wurde 100%  auf Funktion geprüft.