Techne TC-4000 Thermal Cycler Lab

The PCR Cabinet is designed for the production of PCR and other sterile samples without contaminatio (more)n. The work area has a HEPA filtered air down flow to provide minimum of CLASS 100 Air at a laminar velocity of approx. 0.4 m/sec. The cabinet is fitted with a timer controlled U.V. light for sterilising the cabinet work-surface and equipment. A safety door is supplied to cover the work area whilst cabinet is being sterilised. The work surface is manufactured from 316 grade stainless steel for ease of cleaning. Laminar flow velocity: >0.4m/sec UV lighting 254 nm at 15 watts Dimensions (WxDxH): 63 x 55 x 90 cm Work area size: 610 x 550 mm Weight: 60 kg

Block: Gold anodized 96 well block Max Heating Rate: 3.5°C/sec Max Cooling Rate: 2.5°C/sec Avg Heati (more)ng Rate: 3.0°C/sec Avg Cooling Rate: 2.0°C/sec Temperature Uniformity 55°C: ± 0.20°C within 15 sec Temperature Uniformity 70°C: ± 0.30°C within 15 sec Temperature Uniformity 95°C: ± 0.60°C within 15 sec Block Temperature Range: 3°C to 99°C Gradient Temperature Range 20 to 99 °C Control Accuracy +/- 0.1 °C Block Format: 96 well (70µl) Memory: 350 typical programs in up to 30 user directories (password protected) Auto restart after power failure: Yes Lid Temperature Range: 30 to 99°C Dimensions (WxDxH): 280 x 380 x 240 mm Weight: 13.0 kg

This was removed from a university lab where it was surplus to requirements. The unit powers up but  (more)when we tried to connect it to a PC with software we had some issues. (Software not included). We installed software on a test PC and it did seem to connect to the RG3000, but it is stating that there is a Fatal Hardware Malfunction. The machine can't be used until the distributor has service it. After starting it again we got another error: Thermistor is Open. We have removed the casing to check inside the unit and cannot find any obvious issues. There is an LCD panel inside that is showing 'TEMP OVER 140/127.5/2.1/152.0'. This displays as soon as the unit is switched on, so it looks like there is some sort of temperature error happening. There are 4 x PTC EPCOS C810 Thermistors in the power supply section of the unit. It's possible that there is a fault with at least one of those. It is in otherwise reasonable cosmetic condition with marks from use, but is sold for spares/repairs The item holds up to 72 x 0.1ml strip tubes.

Ohaus 30400169 Modular Heat Block, 10 x 8 PCR Tube Strips The Ohaus 30400169 Modular Heat Block, 10  (more)x 8 PCR Tube Strips is crafted from solid anodized aluminum to ensure durability and efficient heat transfer. This modular block is compatible with Ohaus HB Series Dry Block Heaters. INCLUDED: The Ohaus 30400169 Modular Heat Block, 10 x 8 PCR Tube Strips includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

SCILOGEX EZee Mini-Centrifuge, Green Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 StripsEZee mini cen (more)trifuges are ideal for microfiltration and quick spin downs from the walls and caps of microcentrifuge tubes. The compact design takes up less than six inches of bench space. Easy open clear colored lids are available in four colors. Simply close the lid for acceleration and open the lid for deceleration, or alternatively use the on/off switch.Product Features - Available in two colors i.e., green, blue - Easy-to-use with dual start/stop function. - Maximum speed 7000rpm/2680xg - Supplied with an 8 place 1.5/2.0ml microtube rotor and 16 x PCR tube rotor & 0.2/0.5ml tube adapters. - Compact design - Whisper quiet operation, noise level ≤ 45dB - Ideal for quick spin downs of microtubes and PCR tubes - Simply close the lid for acceleration and open the lid for deceleration or use the on/off switch. - Accelerates and brakes in seconds. - Universal voltage - Rotors change without tools. Click Here to View Product Video INCLUDED: The SCILOGEX EZee Mini-Centrifuge, Green Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips includes: - Power Cord - Two Year Manufacturer's Warranty

Hermle 4 x pcr rotor, Hermetically Sealed (for Z216 series only) The Hermle 4 x PCR rotor with a her (more)metically sealed lid is designed for use exclusively with Hermle Z216 series centrifuges. It has a maximum speed of 15,000 RPM, generating a maximum relative centrifugal force (RCF) of 15,343 x g, making it ideal for a variety of PCR applications. The rotor can accommodate up to 4 strips of 8-PCR tubes, providing ample space for PCR experiments. The rotor has an angle of 45°, which facilitates effective separation of samples. The hermetically sealed lid provides a safe and secure environment for samples and prevents contamination due to aerosols. Overall, the Hermle 4 x PCR rotor is an excellent choice for PCR applications in a laboratory setting, providing consistent and reliable results. INCLUDED: The Hermle 4 x pcr rotor, Hermetically Sealed (for Z216 series only) includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

NESLAB Coolflow CTF33 Refrigerated Recirculator Lab This item was removed from a university where it (more) was surplus to requirement. It is in good cosmetic condition and powers on, although we were unable to set the desired temperature due to a display fault. Therefore, it is listed as Spares/Repair.

Bio-Rad UltraMark Microplate Imaging System This item was removed from a university where it was sur (more)plus to requirement. The unit powers up and is in good working order (thermometer not included).It is in fair cosmetic condition. No controller or additional equipment included to adjust the temperature. Model: Ultramark.

DP-5 Additional weighing platform module for MW-04 Expand the capabilities of your terminal Enhance  (more)the functionality of your weighing system with the DP-5 module from RADWAG, a leader in precision weighing innovations. This advanced module allows for the easy and convenient connection of an additional weighing platform to your terminal, enabling more comprehensive analysis and faster data processing.

Waterproof platform scales H315/HR series is designed for operation in locations with high humidity  (more)or direct contact with water. The scales is easily used in areas with no access to power supply from mains, as it features an internal rechargeable accumulator. Design Single load cell stainless steel platform scales H315 HR series is based on a terminal PUE H315 series. The terminal features large backlit LCD display and function buttons for easy operation. The terminal is installed on a pillar for easy readout of measurement result. Optionally, the scales is offered with indicator installed on a cable for mounting it on a wall. The weighing platform structure is made of stainless steel class AISI 316 with a stainless steel load cell providing the highest IP rating of 68. The scales features RS 232 interface, and optionally an additional display socket. The scales is powered from mains or internal rechargeable accumulator. Optionally, the scales can be powered from mains - 110/120VAC 60Hz (non-standard factory option).

Julabo CORIO C-B13 Open Heating Bath, 115V/50-60Hz (NRTL Certified) Working Temperature Range 20°C  (more)to 100°C Heating Capacity 1000W Volume 13L Features - Models for internal applications - Bright, white, easy to read display - Very quiet - Precise temperature control JULABO CORIO™ Immersion Heating Circulator combinations with transparent or stainless steel bath tanks for routine laboratory tasks. Units include bright LED display and easy operation. A quick connect bath clamp is included.The CORIO™ C immersion circulator provides temperatures to 100 °C for internal bath applications for use with water only.Products include a quick connect clamp for positioning the CORIO™ C on tank rim. Polycarbonate bath tanks have volume graduations in L and Qt. Stainless steel bath tanks include a drain port (except B5).INCLUDED: The Julabo CORIO C-B13 Open Heating Bath, 115V/50-60Hz (NRTL Certified) includes: - Quick Connect Clamp - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hirayama HICLAVE HG-50 Floor-Standing Autoclave with Automatic Lid, 50L, 120V Chamber Volume 50L Ste (more)rilization Temperature Range 105°C to 135°C Chamber Dimensions 14.3" x 19.0" (36.4 cm x 48.2 cm) Features - Space-saving design with lid opening upward - Agar sterilization mode for sterilizing agar and then automatically maintaining it at liquid temperature - Dual-sensing lid interlock prevents lid opening when chamber is pressurized or when temperature exceeds 97°C - Agar melting mode for melting agar and maintaining it at liquid temperature, or for a hot, faster start-up - One-touch lever to easily open and close chamber lid - In-process display shows the status and the progress of sterilization cycle - Door-closure sensor provides a prompt and the cycle will not start unless the door is closed properly The Hirayama HICLAVE HG-50 is a floor-standing autoclave with an automatic lid, offering a 50-liter chamber capacity. It features dimensions of 19.7" x 27.2" x 35.0" and a chamber size of 14.3" x 19.0". This autoclave operates within a temperature range of 105°C to 135°C, with a sterilization timer adjustable from 1 to 300 minutes. Notably, it includes an agar warming range to maintain temperatures between 45°C and 60°C for up to 24 hours, preventing coagulation. The HG-50 provides a delayed auto-start function, programmable from 1 to 99 hours, and a built-in cooling fan. It offers a range of safety features, including a circuit breaker with GFCI and multiple power cut-offs. The model comes equipped with a 15-liter steam condenser, a 2-liter drain water bottle, and can operate on either 120V or 220V. The HG-50 is part of the HG-Series, which includes four models with varying features such as programmable auto-start, safety interlocks, multiple sterilization cycles, and an advanced control panel. The larger models, HG-113 and HG-133, incorporate a radiator for efficient steam condensing. INCLUDED: The Hirayama HICLAVE HG-50 Floor-Standing Autoclave with Automatic Lid, 50L, 120V includes: - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty