Applied Biosystems QuantStudio 3 Real-Time PCR System

ITEM-36232

Capacity: 96 tubes 0.2 ml, 96 well microplates Block: Silver Block coating: Gold Max Heating Rate: 6 (more).0°C/sec Max Cooling Rate: 4.0°C/sec Avg Heating Rate: 5.5°C/sec Avg Cooling Rate: 3.5°C/sec Temperature Uniformity at 95°C: ± 0.50°C after 15 s Temperature Uniformity at 70°C: ± 0.25 °C after 15 s Temperature Uniformity at 55°C: ± 0.15 °C after 15 s Gradient Temperature Range: 3°C to 99°C Temperature Range: 3°C to 99°C Control Accuracy: ± 0.1°C Lid Temperature Range: 30°C to 110°C Dimensions (WxDxH): 277 x 457 x 264 mm Weight: 15 kg

Accuris PR2001-N-1000 qMAX Probe No Rox qPCR Mix, 1000 Reactions Accuris qMAX™ One Step Kits allow f (more)or highly sensitive real time RT-qPCR assays to be performed directly from RNA templates. Workflows are simplified with optimized formulations of ready-to-use 2X qPCR master mix and 20X reverse transcriptase. INCLUDED: The Accuris PR2001-N-1000 qMAX Probe No Rox qPCR Mix, 1000 Reactions includes: - Accuris PR2001-N-1000 qMAX Probe No Rox qPCR Mix - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The Applied Biosystems QuantStudio 3 Real-Time PCR System is designed for users who need an affordab (more)le, easy-to-use real-time PCR system that doesn’t compromise performance and quality. The simplified Design and Analysis software is ideal for both first-time and experienced users. Using proven OptiFlex technology (featuring four coupled channels and white LED) and featuring three independent Veriflex temperature zones, the QuantStudio 3 system enables improved data accuracy and sensitivity for a broad range of genomic applications. Sample capacity: 96 wells Reaction volume: 0.1 mL block, 10–30 μL Excitation source: Bright white LED Optical detection: 4 coupled filters Excitation/detection range: 450–600 nm/500–640 nm Multiplexing: Up to 4 targets Maximum block ramp rate: 0.1 mL block, 9.0°C/sec Average sample ramp rate: 3.66°C/sec Temperature uniformity: 0.4°C Temperature accuracy: 0.25°C Compatible dyes: FAM/SYBR Green, VIC/JOE/HEX/TET, ABY/NED/TAMRA/Cy 3, JUN, ROX/Texas Red Security, auditing, and e-signature (SAE) features: No

The GeneAmp PCR System 9700 is an automated instrument,  specifically designed Instrument for the am (more)plification of nucleic acids using the Polymerase Chain Reaction (PCR) process. The user interface consists of a control panel with a full numeric keypad, soft keys, and a graphical display screen that shows the time and  temperature profile for each run. Equipped with a 96 well block Sample temperature range: 4.0 to 99.9°C The eight pre-coded methods are: AmpliCycle Sequencing AmpliTaq Gold DNA Polymerase BigDye Terminators General PCR LSM2 Time Release PCR Touchdown PCR XL PCR

Rigaku MicroMax-007HF Rotating Anode X-Ray Generator, AFC-11R System Lab This system was removed fro (more)m a university where it was surplus to requirement. All units are in excellent cosmetic condition. This Rigaku X-ray generator is reportedly in working condition according to the previous owner. However, some parts, such as the detector, were removed for spares to keep another system running. No testing was conducted, as the main unit requires a transformed three-phase 400-volt to a 200-volt three-phase supply. Therefore, we cannot confirm its working condition and therefore it is listed as Spares/Repair. This system comprises the following: Rigaku MicroMax-007HFModel RA-MICRO7HFM_RACSerial No. ID211302 The main control system is mounted on a cabinet 100 cm x 60 cm x 90 cm high with a metric 2.5 cm hole spacing isolation tabletop.The operating unit mounted on the table is 40 cm x 30 cm x 55 cm high Rigaku Model AFC-11R detector base and positioning unitSerial No. ID02493 Technifab Products cryogenic sample preparation unit52 cm platform with 9 cm central hole with insulated bung26 cm diameter x 22 cm deep stainless vessel Accessories: 1 x Rigaku Osmic Varimax Optical Fixture Serial No. 25001 x Rigaku Crystallography X-ray XRF Model CU 4364F5012 x Rigaku X-Ray Diffractometer Instruction ManualsSeveral lengths of colour coded 5mm tubing1 x Hampton Research HR4-767 XYZ heated goniometer head1 x Hampton Research HR4-643 XYZ short standard goniometer head1 x PEX4S553B PCB/card to interface with 4 coms sockets

PHCBI CO2 Incubator Model Type MCO-170AICD-PE With Shelving And Tray Lab This item was removed from  (more)a university where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included). It is in very good cosmetic condition internally and externally.

Stainless steel platform scale with four sensors No matter where you place the load on the platform, (more) the result will always be correct. This is due to the four sensors built into the platform. You will appreciate this especially when weighing an irregularly shaped object. It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale works anyway (up to 7 hours). Power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! Work as you like The PUE H315 terminal sits on a 3-meter cable that allows you to hang the terminal on the wall. This allows you to arrange your weighing workplace in many ways. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The membrane keyboard is another argument in the discussion of the water resistance of this scale. If you need a dual-range scale, we can make one for you at an extra cost.

E1 class mass standards are characterized by the highest precision in terms of mass. The allowable d (more)eviation from the actual weight is minimal, making standards of this class ideal for applications where every milligram matters. Product Features: Varied Standards: The set consists of 12 wire standards and 13 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 brushes, 2 tweezers and gloves, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant wooden box, ensuring their safe storage and transportation. *The mg unit mass standards are wires.

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not. The frame for recessing (foundation) is part of the set – you will receive it with the ordered scale.