Biometra TAdvanced Thermocycler

Capacity: 96 tubes 0.2 ml, 96 well microplates Block: Silver Block coating: Gold Max Heating Rate: 6 (more).0°C/sec Max Cooling Rate: 4.0°C/sec Avg Heating Rate: 5.5°C/sec Avg Cooling Rate: 3.5°C/sec Temperature Uniformity at 95°C: ± 0.50°C after 15 s Temperature Uniformity at 70°C: ± 0.25 °C after 15 s Temperature Uniformity at 55°C: ± 0.15 °C after 15 s Gradient Temperature Range: 3°C to 99°C Temperature Range: 3°C to 99°C Control Accuracy: ± 0.1°C Lid Temperature Range: 30°C to 110°C Dimensions (WxDxH): 277 x 457 x 264 mm Weight: 15 kg

The Applied Biosystems MiniAmp Thermal Cycler is a compact, accurate, and economical thermal cycler  (more)designed to fit your lab’s basic thermal cycling needs. The MiniAmp Thermal Cycler has a 5-inch color touchscreen, making it easy to control. Block Configurations: 96-well Capacity: 96-well, 0.2 mL Thermal Range: 0°C to 100°C Thermal Accuracy: ±0.25°C (35°C to 99.9°C) Thermal Uniformity: <0.5°C (20 sec. after reaching 95°C) Max. Ramp Rate: 3°C/sec. (Block), 2.2°C/sec. (Sample) No. of Programs: >1000 Reaction Speed: Fast, Standard Dimensions: 390 x 190 x 200 mm Weight: 5.9 kg

Interchangeable blocks with excellent thermal precision Broad (up to 30°C) and accurate temperature  (more)gradient Reliable and easy to use with low noise level Over-tightening protection system in the heated lid Accepts almost all standard PCR plastics Available Blocks: 2x TCA0384 Arktik Thermal Cycler 384 well block  3x TCA0096 Arktik Thermal Cycler 96 well block (WIT) (price / block) (Thermo Scientific Arktik Thermal Cycler is a reliable and flexible PCR instrument for the everyday requirements of any laboratory. Arktik Thermal Cycler is suitable for a wide range of applications from individual reactions to high-throughput projects. It offers flexibility with three different interchangeable blocks: 96-well block, 384-well block and a dual block with two 48-well units. A broad temperature gradient simplifies temperature optimization. It features an easy-to-use graphical interface for protocol setup and also offers preprogrammed protocols for maximum convenience.)

See attached document for more information.

The Bax system is genetics based screening method that quickly and accurately detects target bacteri (more)a in raw ingredients, finished food products, environmental and water samples for fast accurate results. Through the polymerase chain reaction (PCR), the Bax system provides “yes-no” answers without the need for confirmationor expert interpretation of results. Tableted reagents provide minimal hands-on time using standard laboratory techniques in addition to accuracy, long shelf life and consistency. The Bax system cycler/detector provides even more ease of use through automated amplification and detection. Just load your samples and walk away. Electronic results that are clear, reliable and easily store are available in about four hours. Automated cycling, detection and analysis High capacity load of 96 samples per batch Single platform and protocol for all organisms allows testing for multiple targets in the same batch Electronic record of data for easy storage, retrieval and printing Pre-packaged PCR tablets have build-in control and ingredients to overcome PCR inhibition Excellent inclusivity and exclusivity for all targets No confirmation required Clear and reproducible results, independent of operator technique Minimal hands-on time using standard laboratory techniques Results as quickly as the day of sampling Performance meets or exceeds gel-based Bax systems Including software

The water vapour permeability determination set is used in moisture analyzers of max capacity greate (more)r than 50g. Water vapour permeability is a feature that determines the quality and practicality of application of a given fabric. Clothes or footwear made of materials of inadequate permeability may be unhealthy and uncomfortable. In order to determine water vapour permeability, RADWAG moisture analyzer has to be equipped with a water vapour permeability determination set. The developed method of testing water vapour permeability consists in placing required amount of water in a vessel made of aluminium alloy, inside which a fabric sample, cut using a blanking die, is clamped. Prior to the test, the sample should be left in a room with stable ambient conditions for 24 hours. It is recommended to place the vessel containing water and sample in the moisture analyzer and start the drying process at 40&deg;C. The advantage of this method is a very short drying time. It takes up to 50 minutes to obtain the result. In contrast, measurement carried out using standard method takes up to 72 hours. Measurement results are presented in mg H2O / 1000 mm2 / 24h or as the percentage amount of water vapour passed through the material to the amount of water vapour passed without the tested fabric.

The 21 CFR Part 11 Compliance Module is a solution especially useful for those users who are obliged (more) to conform to provisions of 21 CFR Part 11 and EU GMP Part 4, Annex 11 regulations. These two documents determine the rules for using electronic records and signatures. Data protection is guaranteed by: advanced password settings, control of logging correctness, various permission levels, data management access, backup, electronic signature, time-defined automatic logout, modification record to Audit Trail file. The module includes &quot;Audit Trail&quot;. Audit Trail is a kind of a log where all modifications of balance settings, changes in database records and user activity are recorded. Audit Trail, for example, keeps record of previous and new modifications in databases and informs by whom and when they were introduced. This log allows the administrator to track and find out who logged in, when, who signed a document or who used invalid password. The Audit Trail Reader freeware allows users, upon connection with a balance, to display Audit Trail log and manage it by generating reports of various formats: pdf, xls, csv, html.

Self-centering weighing pan of a floating nature is intended for APP KO comparator. It is used inter (more)changeably with a standard weighing pan. The &ldquo;floating&rdquo; weighing pan is installed in course of a manufacturing process therefore remember to order it when purchasing the APP KO comparator as it is not sold separately. The pan has been designed to aid the operator stabilize and level weights that are located eccentrically. Additionally it helps to place eccentrically group of weights, total mass of which equals reference weight mass. The pan surface is covered with cork featuring marks that determine position of particular weights.

IKA R 1375 Paddle Stirrer Tangential flow, minimum turbulence, good heat exchange, gentle treatment (more) of product. Used at low to medium speeds.Stirrer Ø: 70 mmShaft Ø: 8 mmShaft length: 550 mm INCLUDED: The IKA R 1375 Paddle Stirrer includes: - Operator's Guide - Manufacturer's Documentation - 30 Day Full Parts and Labor Warranty Request a Formal Quote

Interchangeable blocks with excellent thermal precision Broad (up to 30°C) and accurate temperature  (more)gradient Reliable and easy to use with low noise level Over-tightening protection system in the heated lid Accepts almost all standard PCR plastics Available Blocks: 2x TCA0384 Arktik Thermal Cycler 384 well block  3x TCA0096 Arktik Thermal Cycler 96 well block (WIT) (price / block) (Thermo Scientific Arktik Thermal Cycler is a reliable and flexible PCR instrument for the everyday requirements of any laboratory. Arktik Thermal Cycler is suitable for a wide range of applications from individual reactions to high-throughput projects. It offers flexibility with three different interchangeable blocks: 96-well block, 384-well block and a dual block with two 48-well units. A broad temperature gradient simplifies temperature optimization. It features an easy-to-use graphical interface for protocol setup and also offers preprogrammed protocols for maximum convenience.)