Applied Biosystems 7500 Fast Real Time PCR System Lab

Sample capacity: one 384 well PCR plate Temperature control range of the block: 4°C to 99°C Gradient (more) range: 1°C to 20°C Temperature range of the gradient: 30°C to 99°C Temperature control range of the lid: 37°C to 110°C Block hmogeneity (at 35°C): ≤± 0.3°C Block hmogeneity (at 90°C): ≤± 0.4°C Control accuracy: ± 0.2°C Heating rate: 4°C/s Cooling rate: 3°C/s Dimensions (WxDxH): 260 x 415 x 370 mm Weight: 18.5 kg Required software and/or control unit not included

This Techne Flexigene FFG02FSD Bench-Top Thermal Cycler was removed from a laboratory where it was s (more)urplus to requirements. The unit is in good condition but is showing signs of wear. It powers on, and a basic program was run to test the lid and the sample tray heater, which is working. It has not been tested further.

Thermal cycler gradient Eppendorf 5331 Mastercycler Gradient. Block universal for 96 tubes of 0.2 m (more)L or 77 tubes of 0.5 mL. Control of the temperature of the block of 4 to 99°C.  Temperature-control speeds: Heating rate: approx. 3°C/s; cooling rate: approx. 2°C/s, measured on the block.Temperature Accuracy: ± 0.2°C. Storage of 100 programs. RS232 output. Includes manual. The Eppendorf 5331 Gradient MasterCycler is ideal for quantitative PCR applications and offers extremely fast temperature rise, a 1° to 20°C gradient function, short detection times and intuitive programming. The gradient block can hold 0.2 mL (capacity of 96) and 0.5 mL (capacity of 77) tubes or a microtiter plate (capacity of one), without the need to change blocks. Specifications: 230 V; 50-60 Hz; 500W Dimensions AnchxFxAlt cm: 26X41X27 Weight: 12 kg

Hermle 4 x pcr rotor The Hermle 4 x PCR rotor is designed to provide efficient and reliable sample p (more)rocessing in PCR applications. This rotor is compatible with the Hermle Z32-HK, Z327, and Z446 series centrifuges, making it an excellent addition to any laboratory using these centrifuges. The rotor has a maximum speed of 15,000 RPM and a maximum relative centrifugal force (RCF) of 15,343 x g, allowing for fast and efficient sample processing. The rotor has a 45° angle, which ensures the samples are held securely in place and can be easily accessed. This rotor can hold up to 4 x 8-Place PCR strips, providing a total capacity of 32 samples per run. This makes it ideal for laboratories that require a high throughput of samples in PCR applications. The rotor is made from high-quality materials, ensuring its durability and longevity even with repeated use. Its design allows for easy and quick loading and unloading of samples, increasing the efficiency of the centrifugation process. INCLUDED: The Hermle 4 x pcr rotor includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark C2417-RCMB COMBI-rotor for 24 x 1.5/2.0ml and 2 x PCR Strips (16 x 0.2ml) The Benchmark C2 (more)417-RCMB COMBI-rotor for 24 x 1.5/2.0ml and 2 x PCR Strips (16 x 0.2ml) is for use with Benchmark MC-24 and MC-24R centrifuges. This rotor has a maximum speed of 13,500 RPM, and a maximum capacity of 24 x 1.5/2.0ml or 2 x PCR strips. INCLUDED: The Benchmark C2417-RCMB COMBI-rotor for 24 x 1.5/2.0ml and 2 x PCR Strips (16 x 0.2ml) includes: - Benchmark C2417-RCMB COMBI-rotor - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Accuris PR2120-N-500 qMAX Green One-Step RT-qPCR Kit, No Rox, 500 Reactions The qMAX Green One-Step  (more)RT-qPCR Kit is aready-to-use 2x master mix and companionthermostable reverse transcriptase for usein highly sensitive real-time RT-PCR assaysin which intercalating dye-based detectionprovides the option of a post amplificationmelt profile. The mix is powered by HSTaq DNA Polymerase, qMAX MMLV derivedReverse Transcriptase, and an optimized bufferchemistry for robust first-strand cDNA synthesisand real-time PCR in a single tube. The mixdelivers earlier quantification cycle values(Ct) and broad range detection for increasedsensitivity, speed, reliability and reproducibility.The qMAX Green One-Step RT-qPCR Kit canbe used to quantify a specific target RNA fromeither total RNA or mRNA while reducing thenumber of pipetting steps and time to result. All Accuris One-Step Kits are compatible with standard and fast cycling protocols and provide increased sensitivity, speed and reproducibility for a broad range of samples and targets. The polymerase mix is available with different levels of ROX reference dye for compatibility with all qPCR instruments. INCLUDED: The Accuris PR2120-N-50BLK qMAX Green One-Step RT-qPCR Kit, No ROX, 5000 Reactions (1x50ml, 4x1.25ml) includes: - Accuris PR2120-N-500 qMAX Green One-Step RT-qPCR Kit - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Heating Block 100–300ml Suitable for flasks with a point. New, never used. From surplus stock. Wa (more)rranty: 1 month

This Leica ATC 2000 Compound Microscope was removed from a university lab where it was surplus to re (more)quirements. The unit powers on and is in good cosmetic condition. The stage is in good cosmetic condition and is functional. We used one of our own slides to photograph the clarity of the eyepieces and objectives. Included with it are; Leica Objectives:Blue Leica 440 Achro 40/ 0.66 ∞ / 0.17 Red Leica 438 Achro 4 / 0.1 ∞ /0.17 White Leica 467 Achro 100 /1.25 oil ∞/0.17 Yellow Leica 439 Achro 10/ 0.25 ∞ /0.17 The objectives are in good cosmetic condition. There is a little dirt on the housing from general use. Leica Eyepieces:1x Leica E2 WF 10x/181x 10XWF (191A) The eyepieces are in good cosmetic condition.

Sanyo VIP Series MDF-U33V Ultra Low Temperature Freezer This was removed from a university lab where (more) it was surplus to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition.

This Thermo Electron Forma Series II Water Jacketed CO2 Incubator 3141 was removed from a university (more) lab where it was surplus to requirements. The unit powers up and is in full working order. It is in reasonably good cosmetic condition with some marks from use. It is missing two feet on the right-hand side, but we can replace these on sale. 2 Shelves - 47 x 47cm

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Ramp scale with stainless-steel load cells is intended for meat, fish, pharmaceutical, cosmetic and  (more)chemical industry. The scale is equipped with LD4N system allowing lifting the platform up, useful for maintenance purposes. The mechanism enables safe platform lifting and does not require physical exertion or additional equipment. Upon platform lowering, the scale is ready to carry out measurement. There is no need for recalibration. The scale is made of OH18N9 stainless steel and is equipped with PUE H315 indicator. On a customer request the scale can be made of steel of increased anti-corrosion resistance. The length of the cable for connecting the indicator to the platform - 3m. Ramp scale with LD4N system is equipped with only one ramp. Dual range weighing instrument for an additional charge. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.