Accuris PR2120-N-1000 qMAX Green One-Step RT-qPCR Kit, No Rox, 1000 Reactions

This Applied Biosystems 7900HT Fast Real Time PCR System was removed from a university lab where it  (more)was surplus to requirements. The system powers up and is in good cosmetic condition with only minor usage marks. We have been able to connect the unit to the PC, but unable to test it further. It will likely require servicing before it is used. PC Equipment:-Dell Optiplex GX280 with Dell Monitor, keyboard and mousePSC QS6000 Plus Barcode Scanner PC has the following software:-Applied Biosystems 7900HT Version 2.3 Sequence Detection Systems (SDS)Applied Biosystems RQ Manager Version 1.2 External dimensions -D85 W54 H76cm

Techne TC-3000G PCR Thermal Cycler New equipment (never used) The world's smallest gradient cycler,  (more)the TC-3000G will hold half a 96-well plate, in a horizontal format so that it offers 8 columns for annealing temperature optimisation and 6 rows for optimising reagents such as MgCl2 and primer concentrations. Annealing temperatures can be optimised over a 15°C gradient between the temperatures of 20 and 80°C. Gradient block - A gradient of up to 15°C between the temperatures of 20 and 80°C can be set, allowing any protocol to be optimised within a single experiement. New software - Enables a gradient to be added to any temperature step of the program. Gradient calculator - The gradient calculator function displays the temperature for each of the 8 columns, ensuring easy replication of thermal conditions.

Thermocycler Eppendorf Mastercycler Ep Gradient s Realplex 2 Model Thermal Cycler 5345 + 6300 EPgra (more)dient S Weight : 20 kg Voltage : 220V Dimensions 60×30×50 cm Without Software

SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips Max. Speed 7 (more),000 RPM Max. Capacity 8 x 1.5/2.0ml micro-tubes Driving Motor DC Features - Available in two colors i.e., green, blue - Easy-to-use with dual start/stop function. - Maximum speed 7000rpm/2680xg - Supplied with an 8 place 1.5/2.0ml microtube rotor and 16 x PCR tube rotor & 0.2/0.5ml tube adapters. - Compact design - Whisper quiet operation, noise level ≤ 45dB - Ideal for quick spin downs of microtubes and PCR tubes - Simply close the lid for acceleration and open the lid for deceleration or use the on/off switch. - Accelerates and brakes in seconds. - Universal voltage - Rotors change without tools. EZee mini centrifuges are ideal for microfiltration and quick spin downs from the walls and caps of microcentrifuge tubes. The compact design takes up less than six inches of bench space. Easy open clear colored lids are available in four colors. Simply close the lid for acceleration and open the lid for deceleration, or alternatively use the on/off switch. Click Here to View Product Video INCLUDED: The SCILOGEX EZee Mini-Centrifuge, Blue Lid, for 0.2/0.5/1.5/2.0mL Tubes & PCR8 Strips includes: - 8 Place 1.5/2.0ml Microtube Rotor - 16 x PCR Tube Rotor - 0.2/0.5ml Tube Adapters - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Benchmark Red Mini Centrifuge w/ Microtube and PCR Rotors The Benchmark series of mini centrifuges i (more)s ideal for quick spin downs of micro samples. The easy-open lid permits convenient single-handed operation. The clear lid and electronic safety cut-off allow the user to safely observe samples at all times. The centrifuge quickly accelerates to maximum speed (6,600 rpm / 2,200 rcf) and stops within seconds. The advanced motor mounting system provides quiet, vibration-free operation. All centrifuges include a traditional angle rotor with capacity for six standard microtubes (1.5ml to 2.0ml) as well as a strips tube rotor for 1 PCR strip or 16 individual 0.2ml tubes. Additional adapters are also included for 0.5ml tubes. The rotors can be easily interchanged by the user within a matter of seconds. INCLUDED: The Benchmark Red Mini Centrifuge w/ Microtube and PCR Rotors includes: - 6 x 1.5/2.0ml Fixed Angle Rotor - PCR Tube Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The Applied Biosystems QuantStudio 3 Real-Time PCR System is designed for users who need an affordab (more)le, easy-to-use real-time PCR system that doesn’t compromise performance and quality. The simplified Design and Analysis software is ideal for both first-time and experienced users. Using proven OptiFlex technology (featuring four coupled channels and white LED) and featuring three independent Veriflex temperature zones, the QuantStudio 3 system enables improved data accuracy and sensitivity for a broad range of genomic applications. Sample capacity: 96 wells Reaction volume: 0.1 mL block, 10–30 μL Excitation source: Bright white LED Optical detection: 4 coupled filters Excitation/detection range: 450–600 nm/500–640 nm Multiplexing: Up to 4 targets Maximum block ramp rate: 0.1 mL block, 9.0°C/sec Average sample ramp rate: 3.66°C/sec Temperature uniformity: 0.4°C Temperature accuracy: 0.25°C Compatible dyes: FAM/SYBR Green, VIC/JOE/HEX/TET, ABY/NED/TAMRA/Cy 3, JUN, ROX/Texas Red Security, auditing, and e-signature (SAE) features: No

ATI Portasens lll Gas Leak Detector Model No. D16 with H2O2 Sensor Lab This item was removed from a  (more)university where it was surplus to requirement. It is in good cosmetic condition and powered up, we are unable to test it further at our facility. Please note that this kit does not contain the battery charger, charger cable, sampling wand, or flow meter. The gas leak detection kit contains the following items: 1 x main D16 detection unit1 x ATI H2O2 sensor1 x H10 Sensor Keeper 00-09811 x Tenenergy 10,000 mAh NiMH rechargeable battery1 x calibration t-fitting3 x filters1 x 1/4" straight connector1 x USB cable1 x hard carry case

HP Agilent 6890 Plus Network Gas Chromatograph GC System This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up but has not been tested further at our facility. It is in good cosmetic condition with minor marks.

Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V Temperature Range Ambient +10°C to 26 (more)0°C Temperature Distribution Accuracy ± 2.5°C (at 210°C) Chamber Volume 27L Features - Best seller based on excellent performance and affordability - Superior temperature accuracy - DKN302C/312C/402C/412C/602C/612C models come with observation windows - Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions) - Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities - Increased safety and self-diagnostic functions - Overheating prevention and calibration off-set are possible with auxiliary functions - Easy to use and maintain - Built in exhaust ports The Yamato DKN-302C Programmable Forced Convection Oven 27L with extended functions and safety features. Bestseller based on excellent performance and affordability. Superior temperature accuracy. Comes with an observation window. Programmable PID controller for easy program settings (30-step, 3-pattern program controller with repeat functions). Fixed setting, Quick Auto stop, Auto stop, Auto start, Program operating modes with easy control capabilities. Overheating prevention and calibration off-set are possible with auxiliary functions. Easy to use and maintain. Equipped with built in exhaust ports. Operating temp ambient +10~260°C. INCLUDED: The Yamato DKN-302C Programmable Forced Convection Oven 27L, 115V includes: - 2 x Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Pure water specifications Daily volume: <10 liters Dispense Flow rate: Up to 2.0 l/min Reverse osmos (more)is make up flow rate at 15°C: 10 l/hour Inorganics at 25°C: 18.2 MΩ.cm Total organic carbon (TOC): <5 ppb Bacteria: <0.001 CFU/ml Bacterial Endotoxin: <0.001 EU/ml RNase: <1 pg/ml DNase: <5 pg/ml Feed water specifications Source: Potable tap water Free Chlorine: <0.5 ppm max TOC: <2 ppm Carbon dioxide: <30 ppm (recommended <20 ppm) Silica (recommended max): <30 ppm Temperature: 4 – 40°C (Recommend 10 – 15°C) Flowrate (maximum requirement): Up to 75 l/hr (20 USG) Drain requirements: <90 l/hr (23 USG) Feedwater pressure: 6 bar max, 2 bar min Dimensions (HxWxD): 1020 x 236 x 470 mm Weight: 23 kg Excluding new filters

Recirculation air volume: 725 m3/h Exhaust air volume: 284 m3/h Total air volume: 1009 m3/h In flow: (more) 0.45 m/s Standard lighting : 2x 36 W Exhaust duct: ø 200 mm Internal dimensions (WxDxH): 885 x 600 x 655 mm Dimensions (WxDxH): 975 x 790 x 2180 mm Weight: 180 kg