LAUDA VS 150 OI shaking incubator

New Brunswick Innova 4400 & Innova Shaking Incubator. This was removed from a university la (more)b where it was surplus to requirements. The unit has been assessed by a service engineer and has had the following replacement parts fitted. Motor.Temperature sensor bracket.Door mechanism.Gas struts.Base.Various panels. It has been tested at various speeds and is shaking well. It has been temperature tested at:37ºC - It reached this temp fine. We calibrated it with our SmartVue Thermometer (not included).80ºC - It reached 73ºC and it was at this temperature for quite a while. The unit is in good cosmetic condition but has marks from use. The manual is supplied.

Varioshake shaking incubator These LAUDA tools are renowned for being extremely reliable and suitabl (more)e for heavy use. Specialized in gentle mixing and vigorous shaking, these shaking incubators are used for applications that require repeatable orbital movements and temperatures up to +70°C with excellent stability. They are preferred by standard or research laboratories for incubation, fermentation, homogenization, chemical and biochemical reactions, enzyme and tissue studies, as well as for the cultivation of bacterial cultures. Applications: homogenization, incubation, fermentation or chemical and biochemical reactions. The control panel features soft-touch keys with clear symbols. It will therefore be very easy to set the temperature, the stirring frequency or the incubation time quickly and precisely, rest assured that the technology of these instruments will exactly reproduce the set values. The temperature - Temperature regulation is controlled by a microprocessor, PID type with RS232 interface. - The temperature distribution is optimal throughout the interior of the cabinet. - Temperature setting and display: digital, LED, in 0.1°C increments. - Temperature range: from 8°C above ambient temperature to + 70°C. - Temperature range (with cooling coil; not included): 20 to 70°C, depending on the cooling medium used and the ambient temperature. - Electronic monitoring of the temperature controllers activates visual and acoustic alarms in the event of a fault. In these cases the heating switches off automatically and the cause of the anomaly is shown on the display. Agitation and Incubation - Quiet and robust stirring mechanism with gentle start and smooth, load-independent orbital motion - The orbital motion can be turned on and off - Shaking frequency and incubation time can be set thanks to the microprocessor. - The timer continuously displays the remaining incubation time and acoustically signals its expiration. Specific features of the VS 60 OI model This model, with a liftable acrylic glass cover, consists of an external housing made of electrolytically galvanized and powder-coated sheet steel. The vibrating platform, made of aluminum, has 4 plastic pins to accommodate a vibrating tray or a universal support. - Stirring width: 30 mm - Usable volume 68 L - Shaking frequency min. 20 min-1 - Shaking frequency max. 250 min-1 - Shaking width 30 mm - Load capacity max. 12 kg - Timer from 1 minute to 999 - Vibrating platform width 450 mm - Vibrating platform depth 450 mm - Capacity approx. 60 L / 1 stirring tray

Wave shaker with Ohaus incubator These models are characterized by a slight three-dimensional wave m (more)ovement with a low foaming effect. The control panel features three independent displays with intuitive touch controls and important safety features to protect the operator and sample. - The electronic control allows you to easily adjust the angle of inclination, speed and temperature, each via dedicated controls and displays. - Precise adjustment of the angle of inclination in 1 degree increments, speed variation of 1 rev / min. and setting the temperature in 1 ° C increments. - Gradually increase the speed to the desired setpoint, to avoid splashing. - State-of-the-art motor and electronics to maintain a regular undulatory movement. Applications Hybridizations, cell cultures, absorption techniques, coloring and bleaching gels Display Independent LED displays with information on temperature, speed, tilt angle and time are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum frame with polycarbonate lid Construction features Splash resistant construction, hot warning indicator, overload protection with audible and visual alarm in digital models and audible alarm in analog models Additional Technical Features - ISRK04HDG - Uniformity of ±0.5 at 37°C - Stepper motor drive system - CE safety certification; TUV - Speed ​​accuracy of ±1 rpm - Timer from 1 second to 160 hours

Memmert ICO50 K7 CO2 Incubator w/ Active Humidity Control 56L, 115V Temperature Range Ambient +5°C  (more)to 50°C Humidity Control 40 to 97% RH, or no RH Chamber Volume 56L (2 cu. ft.) Features - Expert precision and control for optimal protection of cultures - User-friendly, intuitive operating concept for ease of use - Allows for direct humidity control from 40 to 97% RH, or no RH - High-quality, corrosion-resistant stainless steel construction for durability and cleanliness - Easily cleanable inner chamber and housing - Rapid heating to setpoint without overshoots for consistent results - Rounded interior edges for simplified, thorough cleaning - Interior sterilization possible at 180°C for 60 minutes without removing sensors - Integrated data logger and adjustable digital timer from 1 minute to 99 days - AtmoCONTROL software for programming, data logging, and device monitoring - SetpointWAIT function ensures process timing starts only when set temperature is reached - Alarm notifications to mobile devices for enhanced safety and monitoring - Battery-buffered ControlCOCKPIT ensures continuous CO2 control even during power outages The Memmert ICO50 K7 CO2 Incubator w/ Active Humidity Control 56L, 115V offers unparalleled precision and control for demanding laboratory applications, ensuring optimal protection for cell cultures, bacteria cultures, and tissue cultures. Designed with user-friendliness in mind, it features an intuitive operating system complemented by a high-quality stainless steel inner chamber and housing that are both corrosion-resistant and easy to clean. This incubator excels in maintaining a hygienic environment with its rounded interior edges and the ability to sterilize the interior at 180 °C for 60 minutes without removing sensors, promoting effortless cleaning and maintenance. Equipped with an advanced control system, the ICO50 K7 reaches desired temperatures swiftly without overshoots, and it includes a battery-buffered ControlCOCKPIT for continuous CO2 control, even during power outages. Alarm notifications can be sent directly to your mobile device, ensuring the safety and integrity of the chamber's contents. The incubator comes with an integrated data logger and a digital timer that can be set from 1 minute to 99 days and 23 hours, supporting complex ramping processes and precise temperature control. With the K7 active humidity option installed, this CO2 Incubator allows for direct humidity control from 40 to 97% RH, or no RH. Further enhancing its functionality, the ICO50 K7 features the AtmoCONTROL software for easy programming and online monitoring of up to 32 connected devices. The software enables simple drag-and-drop input of values and can send automatic alarm messages to multiple email addresses. The SetpointWAIT function ensures that process times start only when the target temperature is reached at all monitoring points. With its robust construction and high-end safety features, the Memmert ICO50 K7 CO2 Incubator is an indispensable tool for any research facility focused on cell and tissue culture. INCLUDED: The Memmert ICO50 K7 CO2 Incubator w/ Active Humidity Control 56L, 115V includes: - 1 x Stainless Steel Perforated Shelf - Water Tank - Gas Connection Hose - 2 x Silicone Plugs - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Scientific Industries SI-1400 Incubator-Genie Shaking Incubator The Scientific Industries SI-1400 In (more)cubator-Genie Shaking Incubator (without plug) offers rotating and shaking capabilities with temperatures from 28C to 75C for applications in gel and blot staining, cell or bacterial culture, or any application that requires mixing, washing, rocking, and temperature control of a sample. Magnetic platform and clip plate system can accommodate almost any container at any angle. Programmable timers and alarms for temperature and/or mixing parameters protect samples from deviation. Chamber air is continuously gently recirculated to ensure temperature uniformity. This incubator is new in the box . In the box: Enviro Genie with 120V line cord (no plug) Magnetic Platform Clip Plates for 10-13mm, 15-17mm, 28-30mm tubes 4 Magnetic Bag Mounting Strips Non-Skid tray Stackable Wire Rack. Includes a Full 6 month Parts and Labor Warranty Scientific Industries SI-1400 Incubator-Genie Shaking Incubator Specifications Rotating Speed 1 to 35 RPM Rocking Speed 6 to 70 cycles per minute Temperature Range 28C to 75C Temperature Stability ±0.1C Temperature Uniformity ±0.5C Temperature Resolution 1.0C Timer Programmable to 99 hours Chamber Volume 24 L (0.86 cu ft) Platform Capacity 4.5 kg (10 lbs) Interior Dimensions (D x W x H) 254 x 362 x 260 mm (10 x 14.25 x 10.25 in) Overall Dimensions (D x W x H) 400 x 560 x 270 mm (15.75 x 22 x 14.5 in) Electrical Requirements 120V, 50Hz, 2.5A

Boekel Scientific 151250 Digital Forced Air Incubator, 2.5 cu. ft. w/ Removable Light Shield, 115V T (more)emperature Range Ambient +8°C to 70°C Temperature Uniformity ± 1.0°C at 37°C Chamber Volume 2.5 cu. ft. (71L) Features - Forced air convection provides excellent temperature stability, uniformity, and recovery time after door opening to keep incubation environment at ideal temperature - Wide temperature range for multiple applications eliminates the need for multiple incubators for different temperature ranges - Single door configuration with removable door panel for light & dark incubations eliminates multiple incubators/multiple doors - Bright easy-to-use digital display with built-in timer - Energy efficient, low-power consumption design - Internal auxiliary outlet provides power for one accessory to be used within the incubator - UL, CE, CSA approved, RoHs compliant making it 100% recyclable - 2 Year Manufacturer's Warranty

This Olympus BX40F-3 Microscope was removed from a university lab where it was surplus to requiremen (more)ts. The unit is in reasonable used cosmetic condition but it does have various marks, scratches and signs of general use. The lamp adjustment slider is snapped off but it can still be operated if you put something thin in the hole(ie small flat screwdriver). Please let us know if this is a major problem for you - we may be able to complete a repair or source a replacement. The microscope has been tested using one of our slides and it appears to work well with all fitted objectives. The system consists of: 1 x Olympus BX40F-3 Microscope body.1 x Olympus U-RLA Reflected Light Vertical Illuminator.1 x Olympus U-SVRS Mechanical Stage.1 x Olympus U-AC Brightfield Condensor.1 x Olympus U-TRU Side Camera Port.1 x Olympus U-TR30 Trinocular Head.1 x Olympus U-TVO.5XC-2 Camera Adapter.1 x Olympus U-SPT Phototube fitted with 1 x Olympus Japan PE 3.3X 125 Objective.1 x Olympus U-PMTVC Camera Adapter.1 x Olympus U-LS30-4 Lamp (new bulb fitted). 1 x Vantage Camera.1 x Q Imaging QICam UV Fast Camera. Both cameras are untested. Microscope has the following 4 objectives fitted: 1 x Olympus Japan 103250 IC10MSPlan100.30∞/- f = 180 1 x Olympus Japan T4-100580 IC20MSPlan200,46∞/0 f=180 1 x Olympus Japan 100DPlan Apo100UV1.30 oil160/0.17 1 x Olympus Japan IC150MDPlan 1500.95∞/0 f=180 It is also fitted with a pair of Olympus WH10X/22 eyepieces.

C315 Load Cell Platform Scale Precision weight determination in light industrial environments at an  (more)even lighter price. Wherever fast weighing is important. The C315 scale is equipped with the PUE C315 weighing terminal with a backlit LCD display. This long-established technology guarantees reliability and low power consumption, and most importantly, a very long display life. Don’t worry about robustness The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. You will not run out of energy The scale has two power sources: mains and rechargeable. Thanks to its well-designed electronics and LCD display, the device consumes only 5W of energy, which will allow you to work for up to 8 hours without mains power. You get battery power as standard.

Multifunctional scales TMX is designed to fast and precise determination of mass in industrial condi (more)tions. TMX Multifunctional scales TMX comprises terminal PUE 5 and a weighing platform. Labelling system series TMX is used to print labels for marking weighted goods e.g. in the process of packing. The program can generate standard labels for single goods. Functionality of the software: a function of weight control (weighing control + / -), previewing weighments carried out on weighing terminal as a table of weighments, simplified reporting module allowing the report to be generated, creation of label templates from labels in weighing terminal, identification of goods by using the code EAN-13 and EAN-128, quick search using the range of barcode scanner, the availability of databases: the operators, products, clients, warehouses, tares (packages), etc. The application enables measurements execution and their record into a local database or on the server. Networked terminals allow transmission of the measurements to the parent database installed on the server. The ability to work with a computer program E2R SYSTEM. Terminal types: PUE 5.15R, PUE 5.19R – resistive touch screen technology. Protection class IP68. High resistance to moisture and dust. In comparison to remaining models, limited brightness and lower resistance to shocks and scratches. Possibility of operation using gloves preventing scratches (latex, material). PUE 5.15IR, PUE 5.19IR – infrared touch screen technology. Protection class IP68. Very high brightness and readability level. High resistance to moisture and dust. High mechanical resistance, possibility of operation using gloves (made of latex, material or even steel chain). PUE 5.15C, PUE 5.19C – capacitive touch screen technology. Protection class IP68. High brightness and readability level. High resistance to moisture and dust, good mechanical resistance. Absolute precision of touch detection, sensing multiple points of touch (multi-touch).

Labconco RapidVap N2 Evaporation System with RS-232 LinkThe RapidVapN2 Evaporation Systems offer a m (more)ore efficient, automatic alternative toKuderna-Danish and rotary evaporators and may be used with a broad range ofaggressive chemicals. In RapidVap N2 Systems, a stream of nitrogen or dry gasis directed downward onto the surface of the sample. Nitrogen blow down reducesthe partial pressure directly over the liquid to speed evaporation and helpremove the solvent as it evaporates. Nitrogen may be programmed for 2, 4, 6 orall 8 tube locations. Vortex motion and dry heat may also be applied to furtheraccelerate processing. The block holds eight large samples, up to 450 milliliters each, making itefficient for environmental and residue testing. An accessory block that holdseight 170 milliliter tubes suitable for solid phase extraction is alsoavailable. In many of these applications, the samples should not go to dryness.The unique Cool-Zone block and tube design significantly reduces theevaporation rate after end point is achieved. The Cool-Zone insulates thesamples and allows the researcher adequate time before the samples reachdryness to remove them or to perform solvent exchange procedures. Alarms thatsignal when timed end point has occurred and when the RapidVap senses that theprocess is nearing completion allow for unattended operation.INCLUDED: The Labconco 7910010 RapidVap N2 Evaporation System with RS-232 Link, 115V, 50/60Hz includes: - Exhaust Hose - Clamp - Sample Tube Caps x 8 - Heat Transfer Grease - RS232 Cable Assembly - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW