Anton Paar AMVn Automated Micro-Viscometer Lab

This Anton Paar AMVn Automated Micro-Viscometer was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but we were unable to test it further at our facility. It is in good cosmetic condition with minor marks from use. Included with it is an instruction manual.

IKA CBC ROTAVISC me-vi Viscometer Package Viscosity Measuring Range 40,000,000 mPas Speed Range 0.0 (more)1 to 200 rpm Working Temperature -100 to 300°C Features - A second beaker (600 ml) can be pre-tempered during the measurement - Optimized water flow management in the insulated bath for fast and precise temperature control - Equipped with the environmentally friendly natural refrigerant R290 - CBC VISC lite can also be used for heating standard vessels according to DIN for absolute viscosity definition with ELVAS spindles or double-walled beakers - The easily removable and cleanable air filter guarantees optimum performance - ROTAVISC and CBC VISC lite are compatible with the labworldsoft® laboratory software, enabling easy automation, control and documentation of measurement results The viscosity of most liquids depends on the temperature. To obtain reliable measurement results, accurate temperature control is crucial. The CBC IKA CBC ROTAVISC me-vi Viscometer Package is the perfect solution for precise viscosity measurement of temperature-dependent samples in the laboratory. The ready-to-connect package combines the IKA CBC ROTAVISC me-vi Viscometer Package rotational viscometer with the CBC VISC lite heating and cooling bath circulator. The sample is measured directly in the heating bath under controlled conditions. IKA CBC ROTAVISC me-vi Viscometer Package is a high-performance rotational viscometer for applications in a measuring range from 100 - 40,000,000 mPas. The CBC VISC lite heating and cooling bath circulator was specially developed for use with IKA viscometers. It covers a temperature range from -25 °C to 125 °C and offers space for two standard beakers (600 ml). This allows a second sample to be pre-tempered during the measurement. Equipped with natural refrigerant R290, the CBC VISC lite is a sustainable and environmentally friendly alternative.INCLUDED: The IKA CBC ROTAVISC me-vi Viscometer Package includes: - ROTAVISC me-vi control S000 - ROTASTAND - CBC VISC lite - SP set-1 - PT 100.8 - Power Cord - Operator's Guide - Two Year Manufacturer's Warranty

IKA ROTAVISC hi-vi II Complete Viscometer Speed Range 0.01 - 200 rpm Setting Accuracy Speed 0.01 ±r (more)pm Time Setting Range 0.017 - 6000 min Features - Versatile for both laboratory and quality control applications, the ROTAVISC hi-vi II Complete measures across a broad viscosity range up to 320,000,000 mPas. - Delivers exceptional measurement accuracy (±1% of the range) and reproducibility (±0.2%) for both Newtonian and non-Newtonian fluids. - Comes with a comprehensive package: a standard spindle set (SP7-SP12), protective bracket, temperature sensor, and the ROTASTAND stand. - Offers convenient features like torque display, timer, temperature measurement, and graph function for comprehensive analysis. - Supports a wide working temperature range from -100 to 300 °C, suitable for various materials and sample types. - The viscometer is constructed with a durable fastening system, including an extension arm and a Rotastand for stable measurements. *Similar Model Depicted The ROTAVISC hi-vi II Complete viscometer is designed for precise viscosity measurements in a wide range of applications, from laboratory research to quality control, with a measurement capability up to 320,000,000 mPas. It features a user-friendly 4.3″ TFT display for intuitive operation, complemented by a digital spirit level for accurate setup and a ramp function for ease in performing repetitive tasks. Accuracy is paramount, offering ±1% measurement accuracy and ±0.2% reproducibility for both Newtonian and non-Newtonian fluids. The device allows for stepless speed adjustment between 0.01 to 200 rpm, ensuring precise control for diverse viscosity measurements. Included in the delivery are essential accessories such as a standard spindle set (SP7-SP12), protective bracket, temperature sensor, and ROTASTAND stand, making it a comprehensive solution for professionals seeking reliable and accurate viscosity measurements. Click Here to View Product Video INCLUDED: The IKA ROTAVISC lo-vi HELI Complete Viscometer includes: - ROTAVISC hi-vi II Complete - ROTASTAND - SP set-2 - PT 100.8 - Guard rail - USB Cable - USB A to Micro-B, 2 m - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA ROTAVISC SBS hi-vi II HELI Complete Viscosity Measuring Range 40000000 mPas Speed Range 0.01 -  (more)200 rpm Working Temperature -100 - 300 °C Features - Special steel ball bearing technology enhances durability for high throughput and frequent spindle changes. - Measures viscosity up to 40,000,000 mPas with +/- 1% accuracy and +/- 0.2% repeatability. - Motorized IKA HELISTAND and 4.3" TFT display simplify operation and ensure precise measurements. - Adjustable speed from 0.01 to 200 rpm, with temperature measurement and calibration options. - Torque measurement, wide temperature range, RS 232 and USB interfaces for data management. The SBS rotational viscometers, part of the IKA ROTAVISC family, bring advanced steel ball bearing technology to the forefront, offering unmatched durability for laboratories with high sample throughput or harsh conditions. These viscometers achieve precise measurements across a vast viscosity range up to 40,000,000 mPas, ensuring accuracy within +/- 1% and repeatability of +/- 0.2% for both simple and complex fluids. Equipped with a motorized IKA HELISTAND and an intuitive 4.3" TFT display, the device ensures uniform sample testing and easy setup, enhancing the user experience for all viscosity measurement tasks. With features such as adjustable speed, comprehensive temperature control, and extensive connectivity options, the SBS series stands out for its versatility and precision in demanding laboratory environments.INCLUDED: The IKA ROTAVISC SBS hi-vi II HELI Complete includes: - ROTAVISC SBS me-vi control - HELISTAND - T-SP-SET - SP set-2 - PT 100.8 - Guard rail - Manufacturer's Documentation - Two Year Manufacturer's Warranty

PSL Rheotek TCB 8 Temperature Controlled Viscometer Bath This was removed from a university lab wher (more)e it was surplus to requirements. The unit powers up and the heating is in good working order. Inside tank dimensions - L59 W31 H37cm It is in good cosmetic condition with some marks from use.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This listing is for a GE Healthcare Ettan IPGphor 3 Isoelectric Focusing System.The unit is in full  (more)working condition and is ready for immediate release.The GE Healthcare Ettan IPGphor 3 is a cutting-edge isoelectric focusing system designed for speed, reliability, and enhanced performance in the first dimension of 2-D electrophoresis. Ideal for researchers looking to streamline their protein analysis workflows, this system offers robust features that cater to diverse applications.Key Features:Simultaneous Strip Processing:Capable of running up to 12 IPG strips at once, accommodating various strip lengths of 7, 11, 13, 18, or 24 cm, providing flexibility for different experimental needs.Enhanced Sample Handling:Utilizes sample cups with the Ettan IPGphor manifold or manifold light, enabling increased protein loading and improved separation efficiency.Advanced Control Software:The Ettan IPGphor 3 Control Software allows management of up to four individual units simultaneously, each with customizable run parameters for optimized performance.Safety Mechanisms:Features an automatic voltage cutoff that activates when the safety lid is opened, ensuring operator safety during experiments.Compatibility:Fully compatible with earlier Ettan IPGphor IEF units, making it an excellent upgrade for labs using older systems. It’s particularly suited for 2-D DIGE applications.

Benchmark TC 32 Mini Thermal Cycler w/ Multi-Format Block “Mini sized” doesn’t have to mean a sacrif (more)ice on features and performance. Benchmark’s TC-32 Mini Thermal Cycler retains the advanced programming features, easy to use software and fast, reliable cycling of the larger TC-9639 Thermal Cycler, but with a smaller block and lower price point. Designed for lower throughput needs, the TC-32 Mini Thermal Cycler has a capacity for 32 x 0.2ml tubes. The wells are arranged in a 4 x 8 format, allowing the block to accept strips of 8 as well as individual tubes. The block heats and cools very quickly – at rates as fast as 5C/second. A proprietary algorithm controls block temperature, bringing samples quickly to the target temperature without any over- or under-shoot. Excellent block uniformity ensures consistency sample to sample. Operation of the thermal cycler is controlled from the large, full color, touch screen. Icon driven menus allow users to get running quickly. Programming is extremely simple and includes options for time and temperature increment/decrements, adjustable ramp rates, and an auto pause and restart functions. More than 100 typical programs can be stored in memory and easily recalled. After a run, samples can be held at 4C. An on-screen report is also available at the completion of a run. The heated lid is self adjusting – the spring loaded platen in the lid comes firmly into contact with the tops of the tubes to prevent sample evaporation and condensation. There are no knobs to turn or levers to adjust. The temperature of the heated lid can be changed or the heating function of the lid may be turned off. With a footprint less than that of the average laboratory notebook, the TC-32 Mini Thermal Cycler will fit almost anywhere. Its reduced capacity block and economical price make the TC-32 Mini Thermal Cycler the perfect choice for lower throughput laboratories and educational facilities. INCLUDED: The Benchmark TC 32 Mini Thermal Cycler w/ Multi-Format Block includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco 9000720 WaterPro PS/UF Life Science Model Polishing Station, 115V, 60Hz Features - Timed  (more)dispense for unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) - CE Conformity (230 volt models WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000720 WaterPro PS/UF Life Science Model Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Motic Panthera TEC-BD/DF/RL/TL Trinocular Upright Industrial Microscope, 3x2 Stage Objectives 5X, 10 (more)X, 20X BD, 50X S-APO BD CCIS BD Plan Achromatic & S-Apo (Pb free) DIN (for Brightfield and Darkfield) Optical System Colour Corrected Infinity Optical System (CCIS) Illumination 3W LED Epi-Illumination Kohler Illumination 0.06W LED Features - Panthera TEC models include brilliant optics and smart functionality for extended ease of use. - Features Smart Darkfield with 5 Segment illumination mode. - New LD Plan Achromatic and S-Apochromatic BD objectives & 22mm FOV eyepieces. - Pure incident or incident/ transmitted microscope stands available. - 3W LED of selectable color temperature for incident illumination. - Motic LightTracer: Coded nosepiece & Digital light intensity knob. The Panthera TEC offers high value for the inspection of semiconductors and compound materials, especially in industrial quality control and technical education. Brightfield, Darkfield and Cross Polarization contrast are combined with a new, unique-to-Motic segmental illumination that all contribute to the versatility of this model. This concept allows an oblique incident illumination, perfect for the detection of scratches or other defects on flat and reflecting surfaces without a need to move the sample. BD models feature LD Plan BD objectives with a superb imaging performance, mounted on a 5-fold nosepiece. The light intensity for each objective position is automatically memorized and will be repeated once the objective is swung in again. The compact Epi illuminator carries a slot for polarizer and analyzer, ready for Polarization contrast and to reduce internal reflections. The illuminator also includes the controls for varying the incident light in terms of mode (BF or DF) and illumination angle.INCLUDED: The Motic Panthera TEC-BD/DF/RL/TL Trinocular Upright Industrial Microscope, 3x2 Stage includes: - 5X/0.13 (WD 17.3mm) - 10X/0.25 (WD 16.3mm) - 20X/0.40 (WD 7.3mm) - S-Apo 50X/0.80 (WD 1mm), - Dust Cover - Allen Key - Screws for Metal Extension Support - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

CY10 scale’s multi functions The CY10 series multifuncional scale is designed for fast, accura (more)te and repeatable weight determination. It comes with an advanced PUE CY10 terminal, and that means working comfort with a 10-inch high-resolution display with a smooth and intuitive interface. Software for special tasks Thanks to the terminal advanced software, the CY10 multifuncional scale: Cooperates with up to 2 weighing platforms Continuously updates all statistical data after the next measurement is entered into the balance’s memory – either globally (regardless of the weighed commodity) or separately for each weighed commodity selected from the database Has a Tare mode expanded to include End-product issue mode capability Works with RFID tags* (accessing personal data as well as marking specific goods or recipe ingredients in the database). Multifunctional scale, including labelling scale If you need a labeling scale, the CY10 is the perfect solution. With a terminal that: Cooperates with the computer program Label Editor R02 Is compatible with ZEBRA label printers Supports single labels, bulk labels and bulk from bulk labels Allows import/ export of label designs using a pendrive Enables you to assign labels to goods or customers and print a global label The CY10 series multifuncional scale can operate as a labeling scale. Light or dark? Which color theme will you set on your CY10 balance? Both are user-friendly and clear, but we are curious which one you like more. Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13,56 MHz

The RADWAG Development Studio is a software intended for companies willing to develop their own tool (more)s for communication with RADWAG-manufactured weighing equipment. The purpose of RDS is to familiarize customers with solutions used while developing RADWAG communication protocol (Common Communication Protocol). The RDS contains examples of finished code and additional instructions which allow to simplify and accelerate development of new software. The RDS is all a programmer needs to design software that enables error-free communication with our equipment. Functiones: Presentation of functions (and subfunctions) of communication protocol (Common Communication Protocol) - information on which of the functions are available for balances, scales, weighing modules and terminals; Examples of fully-operational source code, ready to be applied in new applications using copy+paste method; Connection with weighing equipment on which each function is carried out - packets that are sent and received during operation are presented as text command, in hexadecimal form and in bytes; Library with mass control, contained within the development environment, is available for a programmer; Complete documentation of the communication protocol; Set of instructions regarding other solutions for programmers employed in companies using RADWAG-manufactured equipment; Available in English language version. *Technical support for an additional fee.