BioTek Model: ELx808 Microplate Reader Lab

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This Turner BioSystems Modulus II Microplate Multimode Reader was removed from a university lab wher (more)e it was surplus to requirements. Included are; 1 x Turner BioSystems Modulus II Microplate Multimode ReaderModel - 9300-011 1 x Injector SystemModel - 9300-062 Fluorescence Optical Kit with:EX 365EX 525EX 490EX 625 It comes with a power supply & a pump module cable. The item powers on and is in good, used cosmetic condition. The absorbance module is not included.

Thermo Scientific Multiskan FC microplate reader. The wavelength range is 340 to 850 nm, which allow (more)s a variety of applications from enzymatic kinetic studies to Lowry assays. Accuracy ± 1% for 0.3–3 Abs at 405 nm, ± 2% for 3–4 Abs at 405 nm. Eight-position filter turret with three standard filters (405, 450 and 620 nm) pre-installed. Slow, medium or fast linear agitation. Fast processing reading in 6 seconds. Automatic calibration and self-diagnosis. Quick access to the most used protocols. The internal software contains qualitative and quantitative calculations for simple, dual and kinetic measurements. USB interface User manual. Specifications

Filter 405 nm suitable for readers microplate mark Asys.

Accuris MR9610 SmartReader Microplate Reader UV-Vis w/ PC Software Included Plates Accepted 96-Well  (more)and 384-Well Flat Bottom Plates Display 10-inch High Resolution Color Touch Screen Wavelength Range 200 - 1000 nm 1 nm Steps Features - Intuitive, 10-inch color touch screen control panel - Accepts both 96 & 384-well plates - Monochromator-based system - No filters required - Wavelength range from 200 to 1000 nm - Stand-alone design - No PC or special software required - USB port for flash drive data transfer - SmartDrop™ Accessory Plate available for DNA/RNA Quantification/Purity Analysis The Accuris SmartReader UV-Vis Microplate Reader (model MR9610) has been designed with ease-of-use and fast results in mind. This instrument brings extensive capabilities to the lab bench and is designed for the busy lab with multiple users. The large touch screen command center is extremely user-friendly and allows for fast set up of new protocols, as well as modifying and running existing protocols. The monochromator-based optical system allows for precise selection of wavelengths from 200nm to 1000nm, with no filters required. This range makes the SmartReader UV-Vis useful not only for typical ELISA , Bradford Lowry, and turbidity assays but also for more advanced applications such as quantitation of nucleic acids and proteins. The SmartReader UV-Vis can be set for Endpoint, Kinetic and Spectral Scanning assays. The MR9610 is designed for efficient processing of multiple samples and accepts standard 96 well plates as well as 384 well plates for high density screening. The plate layout interface allows for a quick and intuitive setup of a plate well’s contents. Users can highlight and label multiple wells to save time. The display shows a graphical representation of the plate. Users can label each well as required for: “known standard”, “unknown sample”, “blank well” , “QC Control well”, “positive control”, “negative control”, and “empty”. Controllable plate shaking and incubation allow for optimization of assay results. Theshaking speed can be controlled at different intensities with options for timed and pulsedshaking before a reading, or in between readings when performing a kinetic assay. Thelinear motion efficiently and uniformly mixes all samples in both 96 and 384 well plates.Temperature can be controlled from ambient +5⁰C up to 45⁰C, allowing for the processingof enzyme kinetics, and bacterial growth assays. INCLUDED: The Accuris MR9610 SmartReader Microplate Reader UV-Vis w/ PC Software Included includes: - SmartReader PC Software for MR9610 - Operator's Guide - Power Cord - 1 Year Manufacturer's Warranty

This compact device is the ideal external light source for fluorescence excitation in microscopy. Co (more)upling is preferably achieved via liquid light guides. The average service life of a lamp is 2,000 hours. The optimised internal air flow cools the lamp and enables quiet operation. A resettable operating hour meter shows lamp operating hours. The brightness of the lamp output can be varied in 5 steps (0-100%) by means of a mechanical dimmer unit. An ultra-fast shutter opens or closes after activation with approx. 6 ms. The shutter is actuated by means of an appliance switch, but is also possible externally by means of a remote control input or CAN-BUS connection. Equipped with a VIS-Lighting adapter. Dimensions (HxWxD): 210 x 130 x 290 mm Weight: 4,7 kg

This Agilent Technologies 1200 Series HPLC G1312A Binary Pump was removed from a university lab wher (more)e it was surplus to requirements. The item is in good cosmetic condition and powered up, as seen the item is missing the front door panel. We are unable to test this item further at our facility. Power supply included.

Scilogex MicroPette 8-Channel Pipettor, 50-300µlThe Scilogex MicroPette 8-Channel Pipettor, 50-300µl (more) has a volume range of 50-300µl with an accuracy of 0.70/1.00/1.50±%.INCLUDED: The Scilogex MicroPette 8-Channel Pipettor, 50-300µl includes: - Calibration/Opening Tool - Grease - Tip - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA KS 130 Basic Shaker Type of Movement Orbital Speed Range 0 - 800 rpm Shaking stroke 4 mm Featu (more)res - Compact and flat reciprocal shaker with ideal swivel motion - LED display for precise speed and time adjustment - Supports a maximum shaking weight of 2 kg - Accommodates a wide range of attachment combinations for various vessel sizes and shapes (attachments sold separately) - Suitable for both timer (5 - 50 min) and continuous operation The IKA KS 130 Basic Shaker is a compact and durable orbital shaker designed for quiet operation and long-term reliability in laboratory settings. With a maximum shaking weight capacity of 2 kg and a 4 mm shaking stroke, it offers electronic speed and timer adjustments via an intuitive LED display. This shaker supports a wide range of attachment combinations to accommodate various vessel shapes and sizes (attachments sold separately). Operating in both timer and continuous modes, it includes essential components such as a single-head wrench and comes backed by a comprehensive warranty for peace of mind. INCLUDED: The IKA KS 130 Basic Shaker includes: - KS 130 basic - Single-head wrench - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA KS 130 Basic Shaker SpecificationsType of movementorbitalShaking stroke4 mmPermissible shaking weight (incl. attachment)2.0 kgMotor rating input45 WMotor rating output10 WPermissible ON time100 %Speed min (adjustable)80 rpmSpeed range0 - 800 rpmSpeed displayLED lineTimeryesTimer display LED lineTime setting range 5 - 50 minOperating modetimer and continuous operationDimensions (W x H x D)270 x 98 x 316 mmWeight8.8 kgPermissible ambient temperature5 - 50 °CPermissible relative humidity80 %Protection class according to DIN EN 60529IP 21Voltage220 - 240 / 100 - 120 VFrequency50/60 HzPower input45 WComparison of ModelsSpecificationsIKA KS 130 Basic ShakerIKA KS 130 Control NOL ShakerIKA KS 130 Control ShakerIKA KS 260 Basic ShakerIKA KS 260 Control NOL ShakerIKA KS 260 Control ShakerIKA KS 501 Digital ShakerShaking Stroke4 mm4 mm4 mm10 mm10 mm10 mm30 mmPermissible Shaking Weight (incl. attachment)2.0 kg2.0 kg2.0 kg7.5 kg7.5 kg7.5 kg15 kgMotor Rating Input45 W45 W45 W45 W45 W45 W70 WSpeed Range80 - 800 rpm80 - 800 rpm80 - 800 rpm50 - 500 rpm10 - 500 rpm10 - 500 rpm0 - 300 rpmTimerYesYesYesYesYesYesYesTime Setting Range5 - 50 min1 - 599 min1 - 599 min5 - 50 min1 - 599 min1 - 599 min1 - 55 minDimensions (W x H x D)270 x 98 x 316 mm270 x 98 x 316 mm270 x 98 x 316 mm360 x 98 x 420 mm360 x 98 x 420 mm360 x 98 x 420 mm505 x 120 x 585 mmRS 232 InterfaceNoYesYesNoYesYesYesAnalog OutputNoYesYesYesYesYesYesVoltage220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V220 - 240 / 100 - 120 V230 / 115 / 100 V.comparison-table tr td:nth-child(2) { background-color: #fffacd; }Request a Formal Quote

Heidolph Hei-VAP Core HL/G3 Non Coated Hand Lift w/ G3 Vertical Glassware Features - Clear digital d (more)isplay showing actual and set values - Two separete knobs with dynamic control for setting the rotation speed and heating bath - Accidental changing of the values can be prevented by the lock function - Intuitive LED ring light system makes activated functions clearly visible even from a distance - Easy adjustment of the immersion depth up to 160 mm and the inclination angle from 20° to 80° - Standby function and residual heat warning at heating bath temperatures above 50°C - Available as hand or motor lift models - The standby button stops all functions and, when using a motor lift model, lifts the evaporation flask from the heating bath Temperature of the water bath can be easily controlled by utilizing the right knob on the interface controller. Heating bath temperature can be set from 20 to 210 degrees Celsius. (oil) Heating bath can be easily removed from the system base and contents can be disposed of with ease. Rotation speed of the evaporation flaskcan be easily controlled by utilizing the left knob on the interface controller. Rotational speed can be set from 10 to 280 rotations per minute. .features-side.third img{height:unset;} The Hei-VAP Series of rotary evaporators was developed with an emphasis on the essentials: well thought-out details with a focus on features and functions to facilitate everyday laboratory work. Standard models are designed without vacuum control. These systems are for integration into an existing vacuum system or for configuration with optional vacuum controller. The PTFE vacuum seals are highly resistant and can achieve maximum tightness and reduce expensive spare parts. The 210℃ universal heating bath is suitable for all flasks up to 5 liters. Conveniently adjust the angle of inclination between 20° and 80° with a maximum height of 160mm. Corrosion free die cast housing features condensation repellent varnish. The Heidolph Hei-VAP Core features an operating concept that is focused on the essentials: clear and with access to the basic parameters rotation speed and heating bath temperature at any time. Two separate knobs with dynamic control for setting the rotation speed and heating bath temperature: fast turning for large jumps, slow turning for precise setting of the set values. The Intuitive LED ring light system makes activated functions clearly visible even from a distance. Features: - Digital display - Direct access to rotation and heating bath temperature - Lock function - Standby button - Residual heat warning Click Here to View Product Video INCLUDED: The Heidolph Hei-VAP Core HL/G3 Non Coated Hand Lift w/ G3 Vertical Glassware includes: - Heating Bath - Control Panel - G3 Vertical Glassware - 1 Liter Receiving Flask - 1 Liter Evaporating Flask - Vapor Tube - Vacuum Seal - Power Cord - Operator's Guide - Full 3 Year Manufacturer's Warranty

Eppendorf A-4-81 Microplate MTP Buckets # 022638840 The Eppendorf 022638840 Replacement MTP/Flex Buc (more)kets for Rotor Model A-4-81-MTP (Pack of 4) is a reliable and durable solution for your laboratory's sample processing needs. These replacement buckets are designed to fit the A-4-81-MTP rotor, ensuring seamless integration with your Eppendorf centrifuge system.The buckets have a user-friendly design and a secure locking mechanism that keeps your samples safe during centrifugation. With a capacity of up to 4 microtiter plates, they offer ample space for a range of laboratory applications, including working with DNA, RNA, proteins, and other biomolecules.Upgrade your lab's sample processing capabilities with the Eppendorf 022638840 Replacement MTP/Flex Buckets for Rotor Model A-4-81-MTP and experience the exceptional quality and reliability that Eppendorf is known for. Eppendorf A-4-81 Microplate MTP Buckets #022638840 Technical SpecificationsMaximum Rotational Speed4,000 RPMMaximum RCF2,900 x gINCLUDED: The Eppendorf A-4-81 Microplate MTP Buckets # 022638840 includes: - Full 6 Month Parts and Labor Warranty