Beckman Coulter GenomeLab GeXP Genetischer Analyzer inkl. Computer + Software

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

€6,500.00 ex VAT

€7,735.00 incl. VAT if applicable

Germany

general laboratory equipment other

Hygiena EnSURE Luminometer

The Hygiena EnSure luminometer is a quality assurance system that can check and detect swabs for the (more) presence of ATP (Andenosine Tri Phosphate) within 15 seconds. The presence of ATP may indicate biological contamination. In locations such as hospitals, it is extremely important that proper cleaning is carried out. With the use of the EnSure, it can be scientifically proven within seconds that the cleaning has been done properly. Implementing a monitoring system to validate cleanliness has been shown to increase compliance with cleaning procedures from 40% to 82%. The main difference with the Hygiena SystemSure luminometer is that the Ensure is more sensitive and can detect up to 0.1 femtomole ATP. The EnSure uses the latest photodiode sensor technology, which has superior sensitivity and stability. In addition, the design is made in such a way that the luminometer is easy to operate with one hand. The luminometer works on two AA batteries for a long battery life, you can use an average of 8-12 months of continuous use before the batteries need to be replaced. Measures ATP, High Sensitivity ATP/Allergen Prevention, TVC, Enterobacteriaceae, Coliforms, E. coli, ALP, and ACP test devices Sensitive – can detect down to 0.1 femtomoles of ATP Advanced photodiode sensor technology – Internal solid-state detector is not affected by drops or shakes Storage: 100 programmable test plans 200 programmable user IDs 251 programmable locations per test plan 5000 programmable test locations Small, lightweight, handheld instrument (250 g, 70 x 180 x 30 mm) Quick-test mode enables ad-hoc testing Large screen with back-light and optional BOLD text Powered by 2 x AA batteries for several months of uninterrupted use Removable read chamber design allows for easy cleaning Durable outside shell and sealed keypad to protect against splashes and wear

€899.00 ex VAT

Netherlands

general laboratory equipment other

IKA Pette multi 8 x 0.5 - 10 µl

IKA Pette multi 8 x 0.5 - 10 µlLies comfortably in your hand with uncompromising precise performance (more): IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 8 x 0.5 - 10 µl includes: - Two Year Manufacturer's Warranty

$617.00 ex VAT

United States

general laboratory equipment other

Benchmark H5000-20 Block, 35 x 2.0ml

Benchmark Block, 35 x 2.0ml The Benchmark Block (for 35 x 2.0ml) for use with the MultiTherm Heating (more) Shaker or MultiTherm Heating and Cooling Shaker INCLUDED: The Benchmark Block, 35 x 2.0ml includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

$298.00 ex VAT

United States

general laboratory equipment other

Benchmark BSH1001 One-Block Digital Dry Bath

Benchmark One-Block Digital Dry Bath Benchmark Digital Dry Baths provide accurate “set and walk away (more)” digital temperature selection, eliminating the need for external thermometers and repetitive “fine tuning” of a temperature control knob. Simply enter the desired temperature on the digital touchpad and the Benchmark Dry Bath provides accurate temperature with real time monitoring that continuously maintains the selected temperature within ±0.2C. In addition, a digital timer is built into the touchpad display. Although it is not designed to shut off the heater, it can be used to alert the user that a chosen time interval has timed out. The cavities of the high grade aluminum blocks are precision machined to match the conical size and shape of 0.5, 1.5, 2.0, 15 and 50ml tube sizes, providing unsurpassed temperature transfer. Assorted blocks are available for compatibility with nearly all common laboratory tubes and plates. Custom blocks are also available upon request. All Benchmark dry baths offer a built-in user recalibration function, to guarantee long term temperature accuracy. Each dry bath includes an easy to use block lifter, with a temperature insulated handle for quick, convenient exchange of blocks, even while they’re still hot.INCLUDED: The Benchmark One-Block Digital Dry Bath includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

$464.00 ex VAT

United States

general laboratory equipment other

Benchmark B3D-STACK Stacking platform, small 10.5"x7.5" with flat mat (3.0"separation)

$118.00 ex VAT

United States

general laboratory equipment other

Model Display Replica of Rhinovirus - Common Cold Virus - A.T.O.M.

Description from the supplier