Sanyo MIR-162 Incubator

New Brunswick Innova Model 4330 Incubator This was removed from a university lab where it was surpl (more)us to requirements. The unit heats but does not cool. The shaking works, but requires maintenance. It is sold for spares/repairs.

This Sanyo Laboratory Incubator Model - MIR-154 was removed from a university lab where it was surpl (more)us to requirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. Inside dimensions - L33 x W62 x H50cm2 Shelves 60 x 31cm Everything is in reasonably good cosmetic condition with marks from use.

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in good working order. The inner door hasn't been tested as it requires compressed air but we see no reason why it would not work with the correct air setup. There are no gloves included. It is in good cosmetic condition with minor marks. Internal dimensions- D57.5 W105 H47cmShelf - 104 x 25cmRight chamber - D29 W33 H30cm

Mini Portable Dry Bath Incubator Mix&Match Block Pad3-100c COYOTE New equipment in its original pack (more)aging Delivered without aluminum blocks Reference: Pad3-100c series chilling/heating dry baths accommodate half of the blocks of a H2O3 dry bath.The mini dry bath is very compact and economical,and it plays a role of all-in-one small box combining the functions of ice box,refrigerator,incubator,water bath,circulator,heater and etc.It works like a laptop,and is a perfect device"mate"for reagents. Temperature Range: 0-100ºC Display precision: 0.1ºC Temperature precision: ±0.2ºC Temperatureevenness: ±0.2ºC Average Heating Rate from 25ºC to 95ºC: 10 ºC/min Average Chilling Rate from 25ºC to 4ºC: 4ºC/min Operation ambient temperature: 8-30ºC Power Supply: 12V DC,5A Dimensions: 130×130×85mm Working area dimensions: 54×72 mm Net weight: 0.7kg

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Thermo Heraeus B6060 culture and incubation oven. Capacity 57L. Temperature range from room temperat (more)ure + 5ºC to 70 °C.   Stability at 37°C ±°C 0.8. Air regulation adjustment. Digital display. Interior dimensions 403*380*370 mm; exterior 744*552*535mm. 52 kg. Includes 2 shelves. User manual in PDF. The Heraeus B6060 incubator is a high-quality piece of equipment designed to provide a precise and stable incubation environment at a temperature of 70ºC. With a capacity of 57 liters, this stove is ideal for a variety of applications in research laboratories, pharmaceutical industry, biotechnology and more.Equipped with a state-of-the-art digital temperature controller, the Heraeus B6060 oven ensures a uniform temperature throughout the interior, which is essential for the growth of cell cultures, the fermentation of microorganisms and other incubation applications. In addition, this oven features with a forced air circulation system that helps maintain homogeneous heat distribution, ensuring that all samples are incubated evenly and efficiently. With its robust and durable construction, the Heraeus B6060 incubator is an excellent choice for any laboratory requiring reliable performance and accurate results.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Memmert UF55 Forced Circulation Oven 53L, 115V Working Temperature Range Min. 10°C above ambient up (more) to +300°C Oven Type Forced Air Circulation Chamber Volume 53 L (1.87 cu.ft.) Features - Setting temperature range from +20°C to +300°C with a working range starting 10°C above ambient - 53 L (1.87 cu.ft.) internal capacity for versatile applications - Precise temperature control with 0.1°C resolution up to 99.9°C and 0.5°C from 100°C - ControlCOCKPIT with adaptive multifunctional digital PID-microprocessor controller and high-definition TFT-color display - Forced air circulation by a quiet air turbine, adjustable in 10% steps for precise airflow management - AtmoCONTROL software for data logging and program management via Ethernet interface or USB port - Fully insulated stainless steel door with 2-point locking and inner glass door for improved safety and visibility - Easy-to-clean stainless steel interior with large-area heating integrated on four sides The Memmert UF55 Forced Circulation Oven 53L, 115V is designed for precise and efficient temperature control, making it ideal for a wide range of laboratory applications. Equipped with the advanced ControlCOCKPIT digital PID-microprocessor controller and a high-definition TFT-color display, this oven provides a user-friendly interface for adjusting critical parameters such as temperature (in Celsius or Fahrenheit), fan speed, air flap position, and program time. The oven's working temperature range extends from a minimum of 10°C above ambient up to +300°C, with a fine resolution of 0.1°C up to 99.9°C, ensuring precise thermal management. Forced air circulation by a quiet, adjustable air turbine enhances airflow within the chamber, delivering uniform heat distribution throughout the spacious 53L (1.87 cu.ft.) interior capacity. The stainless steel interior, reinforced by deep-drawn ribbing and integrated large-area heating on four sides, ensures durability and easy cleaning. The Memmert UF55 also incorporates multiple safety features, including an adjustable electronic overtemperature monitor and mechanical temperature limiter, meeting DIN 12880 standards. The SetpointWAIT function ensures that the process time only starts once the set temperature is reached, guaranteeing accurate thermal conditions. For fresh air regulation, the oven features electronically adjustable air flap control in 10% increments, combined with a vent connection for efficient airflow management. With a fully insulated stainless steel door, two-point locking mechanism, and inner glass door for safe observation, the unit provides optimal protection and convenience. The oven comes with AtmoCONTROL software on a USB stick, allowing easy programming and data management via Ethernet or USB, making it a versatile addition to any laboratory. INCLUDED: TheMemmert UF55 Forced Circulation Oven 53L, 115V includes: - 1 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Corning ACI oven / incubator

1 2 3