Heraeus B6060 57L

Baker Ruskinn Invivo2 400 Incubated Workstation Glovebox and Iconic Gas Control This system was remo (more)ved from a university lab where it was surplus to requirements. The unit powers up and has been temperature tested (thermometer not included).It is in good cosmetic condition internally/externally, with the display screen and internal light/socket in working order. The previous client has stated that it has a faulty O2 sensor, this was confirmed on-site during testing.Therefore, it is listed as Spares/Repair. Also includes; 2 x Power leads3 x Gas feed hoses1 x Data cable

This listing is for a Memmert Double Door Incubator. The unit is in full working condition and is r (more)eady for immidate realese. The Memmert Double Door Incubator is a cutting-edge, high-precision incubator designed to meet the rigorous demands of microbiological laboratories, research facilities, and applications requiring controlled temperature environments. Its innovative double-door design offers optimal visibility and easy access while maintaining consistent internal conditions, preventing contamination and ensuring precise, reliable results. Key Features: Double Door Design: Fully insulated stainless steel doors ensure superior temperature control and easy access without heat loss or contamination risks. Advanced Temperature Control: Available with energy-efficient Peltier Technology or compressor-cooling systems for precise, uniform temperature regulation. Wide Temperature Range: Adjustable from 0°C to +70°C (or +80°C for select models), ideal for a variety of sensitive research and incubation applications. Optimum Temperature Distribution: Rapid energy transfer ensures uniform heat distribution and prevents condensation and sample drying. Quiet, Low-Vibration Operation: Designed for noise-sensitive environments, maintaining quiet and stable performance. User-Friendly Interface: Features Memmert’s intuitive ControlCOCKPIT with optional AtmoCONTROL software for easy programming, control, and monitoring. Benefits: The Memmert Double Door Incubator provides exceptional temperature accuracy, making it ideal for microbiology, cell culture, and other temperature-sensitive processes. This listing is for a. The unit is in full working condition and is ready for immidate realese.The double-door construction allows for easy sample observation and access, while the insulated design ensures minimal temperature deviations. With advanced ventilation technology, energy efficiency, and quiet operation, this incubator enhances productivity and ensures the protection of sensitive samples. Its compatibility with logging and control software offers advanced data tracking and optimization for long-term experiments. Technical Specifications: Temperature Range: 0°C to +70°C (up to +80°C for some models) Construction: Stainless steel, fully insulated Controller: ControlCOCKPIT with optional AtmoCONTROL integration Operation: Energy-efficient Peltier or compressor-cooling systems Defrost Function: Available in select models Quiet Operation: Low-vibration performance Choose the Memmert Double Door Incubator for unmatched precision, energy efficiency, and ease of use, making it the ideal incubator for advanced laboratory applications.

APPLIGENE Hybridisation Incubator Hybrid Hybridisation Oven Hybridisation Oven Model: Hybrid 91 500W (more) RPM: 6 Stainless steel interior Door with glass window For tubes up to 300mm long Viewing window In excellent condition Tested at 37°C

REFRIGERATED LABORATORY INCUBATORS ST SMART POL-EKO ST - STABILITY AND QUALITY AT THE BEST PRICE Bei (more)ng able to both heat and cool, ST incubators are perfect for the stable and safe incubation of samples, in any working environment. The ST series maintains a constant temperature from 3°C to 40°C with excellent precision. As an option, the range can be extended up to +70 °C. Operation at ambient temperature +10°C...+28°C, for cooled incubators with glass door +10°C...+25°C. It's necessary to purchase automatic defrosting function (ST/CHL PLUS) for all units operating at set point <=5°C to prevent icing. Large touch display, LED lighting, alarms, lock, simple and comfortable design, will make using these incubators a breeze; and thanks to the programming with time and temperature profiles, you will be able to carry out highly precise and repeatable incubations. But it doesn't end here, continue reading and discover all the other surprising features of these incubators! WHICH VERSION? THE THREE VERSIONS OF THE ST MODEL The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; metal grid shelves; safety class 1.0 (DIN 12880). COMFORT: stainless steel interior according to DIN 1.4016; stainless steel grill shelves; safety class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel grill shelves; safety class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ABSOLUTE CONTROL CONTROL PANELS The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The ST SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Insulated door with lock - Internal LED light - Optional internal and/or external glass door - USB port for downloading recording data, events, manuals, service. - LAN port - Open door alarm - Access port for external sensor on the side - Quality control protocol (in +37°C) - Available with FOT: phytoperiodic system – day and night simulation. To find out more, download our informative PDF: The photoperiodic (FOT) and phytotron (FIT) systems by POL-EKO. The three versions of the ST models The three models differ in the materials of the internal chamber, the materials of the shelves and the safety class. This subdivision allows you to choose based on your real needs, meeting your budget. BASIC: aluminum interior; wire shelves; over temperature protection class 1.0. COMFORT: stainless steel interior according to DIN 1.4016; stainless steel wire shelves; over temperature protection class 1.0. PREMIUM: Interior in acid-resistant stainless steel according to DIN 1.4301; stainless steel wire shelves; over temperature protection class 2.0. As an option, at the bottom of the page, you can find the ST-INOX accessory; this allows you to order your ST refrigerated incubator with polished stainless steel exteriors, rather than powder-coated sheet metal (light gray with graphite front panel) as standard. ST SMART SERIES POL-EKO offers 10 models of refrigerated incubators with capacities from 70 to 1540 litres. The ST series also offers multi-chamber models with two or three separate and independently controlled internal compartments. These solutions allow you to save space in the laboratory and perform tests at different temperatures. Mixed multichambers are also available, such as incubator-refrigerator or incubator-freezer combinations. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - rating plate 2 - Temperature sensor 3 - Shelf 4 - Access port for external sensor 5 - Adjustable feet 6 - Solid external door 7 - Ventilation 8 - Lock 9 - Touch screen control panel 10 - USB port 11 - Door open sensor 1 - Main switch 2 - Condenser 3 - Cooling system 4 - Fuse 5 - Main power socket 6 - LAN port For larger models: a - Anchor rods b - Integrated power cable c - Fuse d - Main switch e - LAN port OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. In the photo, the beautiful glass doors supplied with the ST models. - Internal glass door - External glass door - Grid shelf - Stainless steel grill shelf - Perforated shelf - Reinforced shelf - Stainless steel basins - Aluminum or stainless steel drawer with guides - Wheels - Coffee table with wheels - Automatic defrost function - Heating up to 70°C - Photoperiodic system - POT - Internal socket - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.3 according to DIN 12880 - Backup battery for the display in case of power failure - Dry alarm contact - LAN cable - Non-standard 20/60/100 mm access door - Additional 30 mm access door

Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V Setting Temperature Range  (more)Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 384 L (13.6 cu. ft.)cu.ft.) Features - 384 L (13.6 cu. ft.) volume capacity with precise temperature control - Setting temperature range from 0°C to +70°C for versatile applications - Energy-saving Peltier heating/cooling system for efficient temperature regulation - ControlCOCKPIT digital controller with high-definition TFT-color display - Process timing starts only when the set temperature is reached with SetpointWAIT function - Three freely selectable temperature calibration points for accurate settings - Refrigerant-free design with Peltier cooling for maximum energy efficiency and environmentally friendly operation - Adjustable electronic overtemperature monitor and mechanical temperature limiter for enhanced safety - Durable, corrosion-resistant stainless steel interior and textured stainless steel casing The Memmert HPP410eco Climate Chamber 384L, 115V offers precise climate control for a wide range of laboratory applications. With a 384-liter capacity and a temperature range from +5°C to +70°C (with humidity) or 0°C to +70°C (without humidity), this chamber provides versatile conditions for storage and incubation. Equipped with dual Pt100 sensors for accurate temperature control to 0.1°C, it ensures reliable performance and consistent environmental conditions. The adjustable humidity range from 10% to 90% RH, controlled by a hot steam generator and dehumidified by Peltier technology, allows for flexible climate simulation, making it ideal for sensitive samples. The TwinDISPLAY control system, powered by a PID microprocessor, ensures easy and precise adjustments, while the AtmoCONTROL software enables programmability via USB or Ethernet. Safety is a top priority, with the integrated AutoSAFETY system offering visual and acoustic alarms for over- and undertemperature protection. The durable stainless steel door with a 2-point locking system and an inner glass door provides secure access while maintaining energy efficiency. With a maximum chamber load of 440 lbs and support for up to 14 shelves, the HPP410eco delivers exceptional capacity and reliability for demanding laboratory environments. INCLUDED: The Memmert IPP410eco Peltier-Cooled Forced Circulation Incubator 384L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Temperature range: Ambient +5°C to 80°C Temperature uniformity: ±0.25°C at 37°C Speed range: 25 up t (more)o 500 rpm (depending on load) Orbit: 25 mm Timer: 0.01 – 99.59 h, continuous Platform size: 460 x 460 mm Dimensions (WxDxH): 559  x 762 x 610 mm Weight w/o accessories: 60.3 kg

Yamato SK-601-115V Natural Convection Dry Sterilizer 162L, 115V Internal Capacity 162L Temperature R (more)ange Ambient +5-260°C Temperature Accuracy ±1°C (at 260°C) Features - Programmable - High precision controller with improved display visibility and operability - Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information - Maximum 99 steps, 99 patterns, repeat operation - Easy sample data collection with cable port - Standard equipped with self diagnostic functions, independent overheat prevention device and earth leakage breaker Programmable natural convection 162L dry heat sterilizer with independent overheat prevention device. High precision controller with improved display visibility and operability. Standard equipped with calibration off-set, lock function, power recovery mode, power on and operation time accumulation, calendar time, accumulation power consumption monitoring, total CO₂ emission, and heat output, save and access operator setting information. Maximum 99 steps, 99 patterns, repeat operation. Easy sample data collection with cable port. Temp setting range ambient +5~260°C..INCLUDED: The Yamato SK-601-115V Natural Convection Dry Sterilizer 162L, 115V includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA RW 47 Digital Mechanical Overhead Stirrer Speed Range 69 to 1,560 RPM Viscosity Max. 100,000 mPa (more)s Stirring Quantity Max. 200 l Features - Digital speed display - Infinitely adjustable speed (57 - 1300 rpm) in two speed ranges - Overload protection - Error code display - Robust, ergonomic design - Quiet operation - With constant power-drive Extremely powerful, mechanically controlled laboratorystirrer designed for highly viscous applications for quantities up to 200 l(H2O). It is suitable for intensive mixing for use in laboratories and pilotplants. The stirrer comes equipped with a protection for overheating of themotor by means of self-locking temperature limiter. Additionally, to securebowls, a stirring shaft protection and clamping fixture are optionallyavailable.

IKA Pette multi 12 x 10 - 100 µlLies comfortably in your hand with uncompromising precise performanc (more)e: IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 12 x 10 - 100 µl includes: - Two Year Manufacturer's Warranty

The Watson Marlow 405 Pump provides users with digital control over a two-channel precision pump. Th (more)is high flow laboratory pump has a speed range up to 200 rpm with a flow rate up to 370ml/min per channel. This microprocessor controlled, dual channel peristaltic pump is easy to control from the upfront digital keypad, allowing users to start, stop, reverse direction, control speed level, and initiate rapid priming. This digital lab pump is built for use with 1.6 mm tubing in sizes 12, 13, 14, & 16 (0.5 – 64.8 mm bore) and spring-loaded track to maximize tube life and flow precision against pressures up to 2 bar. The pump comes with pumphead designed with twin four roller rotors, spring loaded track, and adjustable occlusion lever allowing two individual channels of flow.

All stainless steel laboratory trolley 2 platforms 4 swivel wheels, 2 with brakes. Dimensions platfo (more)rm (WxD): 1050 x 450 mm Height between platforms: 560 mm Dimensions (HxWxD): 900 x 1200 x 600 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW