New Brunswick Innova Model 4330 Incubator Shaker Lab Spares/Repairs NOTE - THIS IS A SPARES/REPAIRS ITEM

BINDER KB-115 refrigerated incubator / drying oven with forced convection 100°C Model: KB115 refrige (more)rated and ventilated Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 460 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 106 kg Year of manufacture: 2006 Tested at 37°C and -10°C

Recovery time after 30 seconds door open at 37°C: 5 min Temperature fluctuation at 37°C: ±0.1K Tempe (more)rature range: 7°C above ambient temperature to 60°C Temperature variation at 37 °C: ±0.4 K Auto-sterilization with hot air at 180°C Humidity range: 90 to 95% RH Double-pan humidification system with condensation protection CO₂ measurement: IR CO₂ range: 0 to 20 Vol.-% CO₂ CO₂ Recovery time after 30 seconds door open at 5 Vol.-% CO₂: 5 min Dimensions (H x W x D): 1070 x 740 x 715 mm Internal dimensions (H x W x D): 750 x 560 x 500 mm Capacity: 210 litre Weight: 129 kg

Thermo Scientific MAXQ 5000 SHKE5000-1CE (4351) Shaking Incubator This was removed from a universit (more)y lab where it was surplus to requirements. The system is faulty and requires a new controller. It is in otherwise good cosmetic condition with minor marks. It is sold for spares/repairs.

Oaken Commercial Incubator & Hatcher This item was removed from a university lab where it was su (more)rplus to requirements. The incubator powers on, with the internal light and fan in working order. The unit is in reasonable cosmetic condition and in working order (thermometer not included). Includes:- 12 x Egg Trays (Dimensions: 50 x 36 cm, each holding up to 88 eggs)

Memmert IPP750ecoplus Peltier-Cooled Forced Circulation Incubator 749L, 115V Temperature Range 0°C  (more)(at least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 749L (26.5 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Visual and acoustic alarms for immediate alerting in abnormal conditions - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management - TwinDISPLAY offers maximum convenience for managing complex processes - AtmoCONTROL software included on a USB drive for easy programming and data management The Memmert IPP750ecoplus Peltier-Cooled Forced Circulation Incubator 749L, 115V epitomizes the pinnacle of efficiency and advanced technology in temperature-controlled cultivation. Enhanced with the TwinDISPLAY feature, this model offers unparalleled convenience and control for even the most complex processes. Powered by Memmert's advanced Peltier Technology, the IPP750ecoplus not only sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based chambers, but also excels in rapid heat-up, cool-down, and recovery times, making it ideal for a variety of applications such as microbiological analyses, bacterial count determination, and accelerated aging tests for dairy products. This incubator achieves homogeneous temperature distribution, thanks to its sophisticated design which includes integrated fans within the Peltier elements for optimal temperature control and energy transfer. The completely sealed interior of the unit minimizes the risk of sample drying out and avoids condensation within the working chamber, with moisture forming externally on the Peltier element during the cooling process. The IPP750ecoplus operates without a compressor, which saves valuable laboratory space and ensures that the operation is exceptionally quiet and free from vibrations. It is constructed from high-quality, corrosion-resistant stainless steel, ensuring both durability and ease of cleaning. The unit's user-friendly TwinDISPLAY allows for the intuitive control and seamless management of complex processes through the AtmoCONTROL software, which can be accessed via a USB drive for programming, managing, and transferring programs either through an Ethernet interface or a USB port. Multiple overtemperature protections, visual and acoustic alarms, and options for automatic email notifications enhance its safety features, making the IPP750ecoplus a critical tool for laboratories seeking the highest efficiency and reliability in their research environments. INCLUDED: The Memmert IPP750ecoplus Peltier-Cooled Forced Circulation Incubator 749L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - USB Drive w/ Software & AtmoCONTROL Manual - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

IKA KS 3000i Incubator Shaker Type of Movement Orbital Temperature Setting Range Room Temp. +5° - 80 (more) °C Speed Range 10 to 500 RPM Features - Large LED display for speed and time settings - Controls with antimicrobial coating for reduction of bacteria - Integrated PID temperature control (use of two PT 1000 temperature sensors) - Junction box in the workspace for connection of an additional temperature sensor e.g. PT 1000.60 - Electronic temperature and speed control - Electronic timer switch: 0 – 999 h (set by the minute or by the hour) - Optional built-in cooler for connection to an external cooling unit e.g. RC 2 basic / control - Unit switches off automatically if disturbed - Unit stops automatically when hood is lifted - Collecting tray with drain hose on rear of unit - Simple operation - All functions can be controlled and documented with labworldsoft - Attachments are not included in delivery, please order separately This innovative incubator shaker enables unattended operation in a precisely controlled environment, featuring orbital movement with a 20 mm shaking stroke and a maximum permissible shaking weight of 7.5 kg. It offers a speed range of 10 to 500 rpm, displayed on an LED screen, and controlled in 1 RPM steps. The unit includes a 7-segment LED timer, adjustable from 1 second to 59940 minutes, and operates in both timer and continuous modes. With a heating range from room temperature +5°C to 80°C and a 50-liter inner chamber, this shaker ensures precise temperature control and stability, ideal for various laboratory applications.

VWR OPTIKA B-292PLi Binocular LED Microscope Lab This item was removed from a university where it wa (more)s surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item includes the following: Objectives- IOS N-PLAN 4x/0.10IOS N-PLAN 10x/0.25IOS N-PLAN 40x/0.65IOS N-PLAN 100x/1.25 Eyepieces - 2 x EW10x/20 6v Dc Power Supply Included with Item.

This FASTER BH-EN 2004-D Class II Biological Safety Cabinet was removed from a university lab where  (more)it was surplus to requirements. The unit powers up and is in working order. It is in good cosmetic condition with minor marks from use. Internal Dimensions are W 119cm x D 59cm x H 73cm.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

IKA Vortex 2 Vortexer Type of Movement Orbital Speed Range 500 to 2,500 RPM Shaking Stroke 4 mm Fea (more)tures - Touch function - Suitable for continuous operation (low heat due to ventilation of motor) - Stable operation at high speeds due to silicon base feet - Infinitely adjustable speed range - Various applications possible because of 3 interchangeable attachments and 7 inserts (e.g. Eppendorf tubes, microtiter plates, Erlenmeyer flasks 250 ml etc.), these need to be ordered separately - Attachments securely click onto appliance in any position - Special strap (VG 3.36) ensures easy handling of round/Erlenmeyer flasks - Sturdy metal die cast housing The IKA Vortex 2 is a versatile vortex shaker suitable for both touch operation and continuous operation. It features an infinitely adjustable speed range, making it ideal for various applications with three interchangeable attachments and seven inserts, including tubes, microtiter plates, and 250 ml Erlenmeyer flasks. The sturdy metal die-cast housing and silicon base feet ensure stable operation at high speeds. Attachments securely click onto the appliance in any position, and a special strap (VG 3.36) ensures easy handling of round/Erlenmeyer flasks. The shaker operates with an orbital movement and a shaking stroke of 4 mm, supporting a permissible shaking weight of 0.4 kg. It offers a speed range of 500 - 2500 rpm and features a touch function for convenience. The IKA Vortex 2 has dimensions of 120 x 140 x 138 mm and weighs 3.9 kg, with a motor rating input of 42 W and an output of 11 W.

Eppendorf S-4-104 Swing Bucket Rotor with Plate Buckets The Eppendorf S-4-104 Swing Bucket Rotor wit (more)h Plate Buckets, is a centrifuge rotor designed for use with the Eppendorf 5810/R Series centrifuges. This rotor has a maximum speed of 3,900 RPM and a maximum relative centrifugal force (RCF) of 2,568 x g. It can accommodate a maximum capacity of up to 16 x Microplates or 4 x Deepwell Plates, making it suitable for a range of applications in biological, biochemical, and clinical research. Overall, the Eppendorf S-4-104 Swing Bucket Rotor with Buckets is a reliable and versatile centrifugation accessory that is ideal for high-throughput sample processing in laboratories. INCLUDED: The Eppendorf S-4-104 Swing Bucket Rotor with Plate Buckets includes: - S-4-104 Swing Bucket Rotor - 4 x Plate Buckets with Carriers - Full 1 Year Parts and Labor Warranty Eppendorf S-4-104 Swing Bucket Rotor with Plate Buckets SpecificationsMaximum Speed3,900 RPMMaximum RCF2,568 x gMaximum Capacity16 x Microplates or 4 x Deepwell PlatesRadius15.1 cmCentrifuge CompatibilityEppendorf 5810/R SeriesDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }