PHCBI MIR-254-PE Cooled Incubator Lab

This Jouan Water Jacketed Incubator Model IG150 was removed from a university lab where it was surpl (more)us to requirements. This was removed from a university lab where it was surplus to requirements. The unit powers up and has been tested with both a temp and CO2 sensor (not included). It is in good working order but will require calibration upon installation. It is in good cosmetic condition with minor marks. Internal dimensions are: L41cm x W41cm x H60cm.

Lab Companion IS-971R Shaking Incubator This was removed from a university lab where it was surplus (more) to requirements. The unit powers up but has a cooling fault. It is seemingly in otherwise working condition. It is in good cosmetic condition with minor marks It is sold for spares/repairs.

LTE Scientific IP100-U Laboratory Incubator This was removed from a university lab where it was surp (more)lus to requirements. The unit powers up and is in reasonably good cosmetic condition with minor marks. (Digital thermometer not included).

Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1060L (37.4 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP1060eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP1060eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP1060eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V Temperature Range 0°C (at  (more)least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 749L (26.5 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP750eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP750eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP750eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP750eco Peltier-Cooled Forced Circulation Incubator 749L, 115V includes: - 2 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Temperature range: Ambient +5°C to 70°C Temperature accuracy: 0.1°C Maximum load per shelf: 30 kg Ma (more)ximum load total: 80 kg Capacity: 256 L Internal dimensions (WxHxD): 800 x 640 x 500 mm Dimensions (WxHxD): 950 x 920 x 650 mm Weight: 87 kg

This listing is for a Heidolph Polymax 1040 Platform ShakerThe unit is in full working condition and (more) is ready for immediate release.                       The Heidolph Polymax 1040 Platform Shaker is expertly designed to deliver consistent and reliable shaking for a wide range of applications in laboratory settings. From gentle mixing to vigorous shaking, this platform shaker provides the perfect solution for your sample preparation needs.Key Features:Customizable Speed Settings:Adjust the shaking speed from 2 to 50 RPM, allowing for precise control based on your specific requirements.Temperature-Controlled Integration:The 1000 series device can be integrated into the incubation system, enabling temperature-controlled applications with the Polymax 1040 for optimal sample conditions.Large Platform:The spacious platform (40 x 40 cm) accommodates a variety of flask sizes and sample containers, making it versatile for different lab protocols.Robust Design:Built with a sturdy frame and durable materials, ensuring long-lasting performance even in demanding environments.Impressive Load Capacity:Designed to handle a load weight of up to 5 kg, accommodating all required samples on this platform wave shaker.User-Friendly Interface:Intuitive digital display for easy monitoring of speed and time settings, enhancing convenience during operation.Continuous or Timed Operation:Operate the device continuously or set a timer for up to 120 minutes, providing flexibility for various laboratory processes.Safety First:Equipped with an overload protection feature that automatically shuts off the shaker if it becomes overloaded, preventing damage to both the shaker and your samples.Applications:Cell Culture: Ideal for cultivating cells in flasks or plates with consistent agitation.Chemical Reactions: Perfect for mixing reagents or solutions thoroughly to ensure uniform results.Sample Preparation: Efficiently shake samples for extraction processes or homogenization.

Adam Equipment LAB 254I Luna Analytical Balance, 250g, 0.0001g Capacity 250g Readability 0.0001g Re (more)peatability 0.0002g Features - Vivid, backlit LCD easily visible in any lighting conditions - Colour-coded keys facilitate quick recognition of the most frequently used buttons - Level indicator and adjustable feet ensure proper balance setup for optimum weighing results - Security slot for optional Kensington-type lock and cable to help prevent theft - Large, grade 304 stainless steel pan allows easy cleaning - Sealed keypad protects against dirt and spills - USB and RS-232 interfaces provide speedy communication with computers and printers - External calibration allows for verification and adjustment with weights ("I" models also feature internal automatic calibration) - Multilingual display allows use in many different countries - Parts counting with preset sample sizes - Printouts include date and time for data tracking within Good Laboratory Practices (GLP) guidelines - Selectable digital filtering for animal/dynamic weighing enables consistent results for moving subjects - Auto power-off to save energy The Adam Equipment Luna Analytical Balances are designed with an array of features and functions to accommodate most lab applications. The Luna range offers improved performance for faster, more accurate readings. With stylish, modern backlighting, Luna’s impressive display gives an aura of smart sophistication. The LCD features large, readily discernible 24mm digits in white on a black background. Multilingual text and display capability make Luna well-suited for users in various regions. For simple operation, navigation buttons are color-coded, helping users perform functions with minimal training. Luna provides USB and RS-232 interfaces to facilitate data collection and transmission to computers or printers. ABS plastic construction and rugged grade 304 stainless steel pan mean Luna is easy to clean and can withstand demanding lab use. Available in four models with capacities up to 250g, Luna offers a readability of 0.0001g and can perform basic and detailed measuring tasks. INCLUDED: The Adam Equipment LAB 254I Luna Analytical Balance, 250g, 0.0001g includes: - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Benchmark B2402 BeadBath Duo, 2L bath, 115V The BeadBath Duo series are the first laboratory baths d (more)esigned for precision temperature control when used with water, or with (the increasingly popular) Lab Armor® thermal beads. Unlike any other laboratory bath, they feature a “MODE” button that can be used to toggle between “Bead” or “Water” mode. Choosing the correct mode will automatically adjust the operation and balance of the multiple internal heating and sensing elements to ensure optimal performance. The result is one combination bath that is suitable for accurate, and uniform temperature control in either condition. While the majority of research laboratories today are using water baths, many prefer the convenience of bead baths due to the advantages listed below. With the BeadBath Duo, the lab gets the best of both worlds, allowing conversion from one bath type to the other, with the simple press of a button. INCLUDED: The Benchmark B2402 BeadBath Duo, 2L bath, 115V includes: - Lift-Off Lid - Power Cord - Operator's Guide - Manufacturer Documentation - 2 Year Manufacturer's Warranty

IKA ROTAVISC SBS hi-vi II HELI Complete Viscosity Measuring Range 80000000 mPas Speed Range 0.01 -  (more)200 rpm Working Temperature -100 - 300 °C Features - Equipped with special ball bearing technology for enhanced robustness, ideal for high sample throughput and frequent spindle changes. - Provides fast and accurate viscosity measurements across a wide range, up to 320,000,000 mPas, with +/- 1% accuracy and +/- 0.2% repeatability. - Offers a wide speed range from 0.01 to 200 rpm with precise setting accuracy, alongside torque display, measurement capabilities, and a timer function for comprehensive testing. - Boasts overload protection, right direction of rotation, and compatibility with an external temperature sensor (PT 100) for a wide working temperature range (-100 - 300 °C). - Supports timer and continuous operation modes, calibration options, and touch function for user convenience and precision. - Complete with a support rod diameter of 16 mm and a telescoping stand stroke of 142 mm for adaptable mounting and measurement conditions. The SBS rotational viscometers from the IKA ROTAVISC series revolutionize viscosity measurement with their innovative steel ball bearing technology, providing superior robustness and reliability for high-throughput applications and frequent spindle changes. Designed for both simple and complex viscosity tests, these devices offer a comprehensive measuring range up to 320,000,000 mPas with exceptional accuracy of +/- 1% and repeatability of +/- 0.2%. The motorized IKA HELISTAND enhances measurement precision by moving the viscometer uniformly through the sample, supported by an intuitive 4.3" TFT display for easy operation and digital leveling for optimal setup. With features like stepless speed adjustment, a wide working temperature range, and connectivity options for data management, the SBS series stands out as a versatile and efficient choice for demanding laboratory environments.INCLUDED: The IKA ROTAVISC SBS hi-vi II HELI Complete includes: - ROTAVISC SBS hi-vi II control - HELISTAND - T-SP-SET - SP set-2 - PT 100.8 - Guard rail - Manufacturer's Documentation - Two Year Manufacturer's Warranty

Siemens VersaCell sample manager for use with a Siemens Immulite 2000 XPi Immunoassay System. Note:  (more)110 V system!

Capacity: 96 tubes 0.2 ml, 96 well microplates Block: Silver Block coating: Gold Max Heating Rate: 6 (more).0°C/sec Max Cooling Rate: 4.0°C/sec Avg Heating Rate: 5.5°C/sec Avg Cooling Rate: 3.5°C/sec Temperature Uniformity at 95°C: ± 0.50°C after 15 s Temperature Uniformity at 70°C: ± 0.25 °C after 15 s Temperature Uniformity at 55°C: ± 0.15 °C after 15 s Gradient Temperature Range: 3°C to 99°C Temperature Range: 3°C to 99°C Control Accuracy: ± 0.1°C Lid Temperature Range: 30°C to 110°C Dimensions (WxDxH): 277 x 457 x 264 mm Weight: 15 kg