Memmert INE 600 Incubator

Temperature range: Ambient +4°C to 50°C Temperature increment: 0.1°C Temperature stability (at 37°C) (more): ± 0.1°C Temperature uniformity (at ambient 20°C – 25°C): ± 0.3°C CO₂ range: 0.2 – 20% CO₂ increment: 0.1% CO₂ stability (at 5%):  ± 0.2% CO₂ uniformity: ± 0.1% Required gas pressure: 0.05 MPa (0.5 bar/7.2 psi) Relative humidity control (at 37°C): 95% Relative humidity reservoir capacity: 2.5 L Capacity total/usable: 165 L/126 L Dimensions (WxHxD): 708 x 845 x 701 mm Internal dimensions (WxHxD): 539 x 692 x 444 mm Weight: 81 kg

Binder KB 115 Lab Cooling Incubator This was removed from a university lab where it was surplus to r (more)equirements. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in reasonably good cosmetic condition but has marks from age and use. Includes 4 shelves.

PHCBI Cooled Incubator Type - MIR-154 Lab This item was removed from a university where it was surpl (more)us to requirement. The unit powers up and is in good working order (thermometer not included). It is in very good cosmetic condition internally and externally. This item requires a Passcode to operate which is available on request.

This CrytstalMation Rigaku Minstrel HT & Gallery 700 Incubator System was removed from a univers (more)ity lab where it was surplus to requirements. The lab retained the "phoenix" unit and the image server PC as well as the software. It was reported as otherwise fully working. Included in the system are; 1 x Middle PC Unit:-Model - Minstrel HT PC/Monitor 1 x Model - Minstrel HT CCUHours -573282 1 x Dell Power Connect 2708Dell PC - The unit powers on and has Minstrel & Robot Programs 2 x Model - Gallery 700 IncubatorsBoth the units power up. Everything powers up but the system has not been tested, the incubators need to be connected to the PC unit to be operated. Everything looks to be in good, used cosmetic condition. The manuals are included.

Memmert BE300 incubator. Capacity 39 L. Max temperature: 70ºC. Stainless steel. 2 shelves. Inner gla (more)ss door. Ignition module: 3 indicators, fresh air regulator and manual ignition controller. Work control module: rotary controller and set for temperature and programs. Timer from 1 to 999 min. Overheating control and time self-diagnosis. RS232C. Dimensions (LHD): inner 480*320*250 mm, external 630*435*595 mm. Includes manual. Optimize your experiments with the Memmert BE300 Incubator, available at Galileo Equipment. Perfect for applications in microbiology, cell research, and stability testing, this oven offers precise temperature control and thermal uniformity. Its robust design and advanced technology guarantee consistent and reliable results. With ease of use and energy efficiency, the Memmert BE300 is the ideal choice for demanding laboratories. Buy now and take advantage of our exclusive offers to improve your laboratory performance with this high-quality oven!

Orbital shaker with Ohaus incubator and cooling The innovative OHAUS incubating cooling shakers are  (more)designed to have a wide temperature range from 10°C below ambient up to 65°C to ensure accurate and repeatable results. All models feature independent displays with intuitive controls and include safety features to protect both the operator and the sample. These rugged laboratory instruments have triple eccentric drive systems for stable orbital motion and are equipped with integrated chip control for reliable shaking. - Prepared for the use of microplates, without the need for accessories, and can easily accommodate modular blocks thanks to the block adapter supplied. - User-controlled temperature calibration function for sensitive applications. Digital control for an adjustable and repeatable shaking speed. - The innovative design with Peltier system, for direct contact between plate and sample, ensures rapid and uniform heating and cooling precision. Applications Immunological analyzes, hybridizations, cell cultures, suspensions and bacterial and yeast cultures, ELISA tests, PCR, enzymatic reactions Display Independent LED displays with temperature, speed and time information are easy to read and allow the operator to view all settings simultaneously Operation Detachable three-wire cable and plug (included) Structure Die-cast aluminum structure with polycarbonate cover and brushless DC motor Construction features Splash resistant construction, overload protection and hot warning indicator Technical Specifications - ISICMBCDG - Calibration: temperature calibration - Transmission System: Brushless DC Motor; triple Eccentric - Safety Certification: CE; TUV - Speed ​​Accuracy: ±2% - Speed ​​range: 100 to 1,200 rpm - Timer: 1 second to 160 hours - Tray structure: aluminum

25 x CAMERA CDV 200 USB DV-1B (EU)

The redesigned Sub-Cell GT Electrophoresis Cell offers updated features that make electrophoresis ev (more)en easier. The Sub-Cell GT Cell is the most versatile submerged horizontal electrophoresis cell in the Sub-Cell family. Because the Sub-Cell GT cell offers the greatest choice of gel lengths, sample combs, and separation modes, it is ideal for Southern and northern blotting protocols. Up to 30 samples can be resolved over a distance of 25 cm. Using four rows of combs, the cell will run up to 120 analytical samples. Cell size (WxLxH): 18 x 40.5 x 9.4 cm Gel tray sizes (OD) (WxL): 15 x 20 cm ReadyAgarose gels accommodated: No Sample throughput: 1–120 Base buffer volume: ~1 L Buffer recirculation: No Bromophenol blue migration: ~3.0 cm/hr (at 75 V) Weight: 1 kg

It allows the observation of samples without losing temperature.

Moisture analyzer is a laboratory measuring instrument intended to determine relative humidity for s (more)mall samples of different materials. MA.R series redefines moisture analyzers standards. The MA.R series This series has been equipped with brand new readable LCD display providing an extra text line for information such as supplementary messages and data, e.g. product name or tare value. The moisture analyzer, using respective pictograms, signalizes currently activated mode, computer connection and functions, both balance and service ones. The MA.R series is enriched with various interfaces: RS232, USB type A, USB type B and Wi-Fi. The moisture analyzer is housed in a plastic casing. Databases: Information system of R series moisture analyzers is based on 6 databases, allowing many operators to operate product database comprising many samples. Collected measurements may be subjected to subsequent analysis. Collected data is registered in 6 databases: Users (up to 10 users) Products (up to 1000 products) Weighings (up to 1000 weighings) Tares (up to 100 tares) Programs (up to 100 drying programs) Drying process reports (up to 1000 reports) The results The results obtained using the moisture analyzer (the final result of the drying process): % M – the mass loss in %; displays the mass change recorded during the drying process, expressed as a percentage, % D – the dry mass obtained during the drying process, expressed as a percentage; the result is the portion of the sample that remains on the weighing pan after the moisture has evaporated, % R – the ratio of moisture content to dry mass, obtained during the drying process, expressed as a percentage; the result is the portion of the sample that evaporated during the drying process, g – the sample mass after drying. Exchange of information within the system is performed by means of USB port on bi-directional basis. It is possible to import and export databases using memory sticks. Direct access to information It is possible to access functions and databases directly, using keyboard soft keys. Database – access to databases Function – access to basic functions F1 and F2 – programmable function keys and menu navigation keys Reports – access to database of drying process reports Profile – access to parameters settings Sample – access to products database