Memmert IPP1060eco Peltier-Cooled Forced Circulation Incubator 1060L, 115V

Panasonic MCO-170AICD-PE CO2 Incubator These were removed from a university lab where they were surp (more)lus to requirements. Both units power up and have been tested with a digital thermometer (not included). It is in full working order. This unit has been professionally serviced and is in full working order. The service report is available on request.

Sartorius Certomat BS-1 Incubator Shaker This was removed from a university lab where it was surplus (more) to requirements. The unit powers up and is in working order, but it is out of calibration by a few ˚C. It will require calibration upon installation. The service menu is password-protected. The shaker is in good working order. The system is in good cosmetic condition with minor marks.. This is the heating only model. It will not refrigerate.

This item has just arrived in our stock. Please enquire for further details.

Memmert IF450 Forced Circulation Incubator 449L, 115V Working Temperature Range Min. 10°C above amb (more)ient up to +80°C Convection Type Forced Air Chamber Volume 449 L (15.9 cu.ft.) Features - Setting temperature range from +20°C to +80°C with a working range starting at Min. 10°C above ambient - Volume of 449 L (15.9 cu.ft.) with a reinforced stainless steel interior - ControlCOCKPIT adaptive multifunctional digital PID-microprocessor controller with high-definition TFT-color display - Adjustable parameters include temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time - Forced air circulation by quiet air turbine, adjustable in 10% steps with pre-heated fresh air admixture - Safety features include an adjustable overtemperature monitor and mechanical temperature limiter TB, protection class 1 according to DIN 12880 - Easy-to-clean stainless steel interior reinforced with deep drawn ribbing and integrated large-area heating on four sides The Memmert IF450 Forced Circulation Incubator 449L, 115V offers precise temperature control with a setting range from +20°C to +80°C and a working range starting at Min. 10°C above ambient. Its large 449 L (15.9 cu.ft.) stainless steel interior, reinforced with deep drawn ribbing, ensures durability and easy cleaning, making it ideal for large-scale applications. The advanced ControlCOCKPIT digital PID-microprocessor controller with a high-definition TFT-color display allows users to adjust various parameters such as temperature (Celsius or Fahrenheit), fan speed, air flap position, and program time, providing optimal control over the incubation process. This incubator features quiet forced air circulation with a turbine, adjustable in 10% increments, ensuring even temperature distribution and pre-heated fresh air admixture. Safety is ensured through an adjustable overtemperature monitor and mechanical temperature limiter TB, meeting DIN 12880 standards. Additional features include AtmoCONTROL software for advanced programming and data management, with support for up to 8 shelves and a maximum chamber load of 661 lbs. The IF450 combines high capacity, safety, and precision, making it suitable for demanding laboratory environments. INCLUDED: The Memmert IF450 Forced Circulation Incubator 449L, 115V includes: - 2 Stainless Steel Grid - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Memmert IF750plus Forced Circulation Incubator 749L, 115V Working Temperature Range Min. 10°C above (more) ambient up to +80°C Convection Type Forced Air Chamber Volume 749 L (26.5 cu.ft.) Features - Setting temperature range from +20°C to +80°C with 0.1°C accuracy - Volume of 749 L (26.5 cu.ft.) with easy-to-clean stainless steel interior - Temperature control via 2 Pt100 sensors Class A in 4-wire-circuit for mutual monitoring - TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller with 2 high-definition TFT-color displays - Forced air circulation with adjustable fan speed in 10% steps and pre-heated fresh air admixture - AutoSAFETY with integrated over- and undertemperature monitor, plus mechanical temperature limiter TB - Function SetpointWAIT ensures the process begins only after the set temperature is reached - Sterilization program for chamber cleaning at 160°C for 4 hours The Memmert IF750plus Forced Circulation Incubator 749L, 115V offers a spacious 749 L (26.5 cu.ft.) chamber with a stainless steel interior designed for easy cleaning and durability. This incubator provides precise control with a working temperature range starting from Min. 10°C above ambient up to +80°C and an accuracy of 0.1°C. Its TwinDISPLAY adaptive multifunctional digital PID-microprocessor controller, featuring dual high-definition TFT-color displays, allows users to easily adjust settings like temperature, fan speed, air flap position, and program time for optimal performance in diverse applications. Equipped with AutoSAFETY, the Memmert IF750plus includes both over- and undertemperature monitoring systems and a mechanical temperature limiter TB for enhanced safety. The forced air circulation system, with an adjustable fan in 10% steps and pre-heated fresh air admixture, ensures consistent temperature distribution. Additionally, the Function SetpointWAIT guarantees that processes only begin once the desired temperature is reached, ensuring precise results. The incubator also features a sterilization program that runs at 160°C for 4 hours, maintaining a clean working chamber suitable for sensitive experiments. INCLUDED: The Memmert IF750plus Forced Circulation Incubator 749L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program:  (more)60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Adjustment range O₂: 1 to 20% Setting accuracy O₂: 0.1% Max. number of internals: 10 (3 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

SAFETY FIRE CASE TYPE 30 - CHEMISAFE - Completely made of electrogalvanized steel sheet with a thick (more)ness of 1 - 1.5 mm, cold bent - Gray RAL7031 - External finish made of acid resistant epoxy resin and passage through a thermal tunnel at 200 °C - Cabinet insulation with high density rock wool panels and calcium sulphate panels - Automatic closing of the lid when the ambient temperature exceeds 50°C 30 mm heat-expanding insulating gaskets which, in the event of a temperature increase, guarantee perfect sealing of the container according to the EN14470-1 standard - Non-standard trolley - Side handles - Lid with lock and key - 1 retention tank in painted steel - ISO 3864 : signs with pictograms - Certified as fire resistant for 30 minutes, according to EN14470-1 BV (Bureau Veritas Supplied: - 1 stainless steel retention tank (capacity 1.5 litres) Optional: - Wall mounting - Internal carbon dioxide fire extinguisher with automatic thermal activation (62 °C) - Cart - Pipe passage (chromatography) APPLICATION: CPG/HPLC CHROMATOGRAPHY Storage of solvents in a portable fire-resistant container and linked to the chromatographic chain via small tubes. The tubes are connected through a fire resistant passage with a diameter of 2 cm located on the lid of the container. In the photo the convenience of the CHEMISAFE transport box. Versatile and very useful. Sturdy structure and metal door straps ensure you a long life. With the optional trolley, very easy to transport anywhere. WHAT IS CHROMATOGRAPHY? Chromatography is a process for separating the components of a mixture. To start the process, the mixture is dissolved in a substance called the mobile phase, which carries it through a second substance called the stationary phase. To know more: Cromatografhy On our webshop there are only some of the models that can be ordered. If you are interested in all the possibilities available, contact us. DO YOU NEED HELP? Do not hesitate to contact us, our CHEMISAFE product expert will help you choose the model that best suits your needs or design the perfect set for your laboratory. Go to the CONTACT form ➞

DigiLab Pro Prep II Protein Digestion & Mass Spec Preparation Station 2   This was removed  (more)from a university lab where it was surplus to requirements. At our facility we were only able to power it up, but we are told it was in full working order prior to removal. The only issues is that the gas struts have failed. It is in excellent cosmetic condition with hardly any marks from use. There are various accessories included.

Thermo Scientific Focus GC Gas Chromatograph This was removed from a university lab where it was sur (more)plus to requirements. The unit powers up but has not been tested further at our facility. The lab confirmed it was working prior to removal. It is in good cosmetic condition with marks from use.

This Buchi V-700 Diaphragm Vacuum Pump was removed from a university lab where it was surplus to req (more)uirements. The unit powers up and the air in/out is working but it has not been tested with a gauge. It it in reasonably good cosmetic condition but has some marks from use. Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

ISMATEC MC-MS/CA8/6 89092A Peristaltic Pump Model: MC-MS/CA8/6 (AGILENT) 89092A RPM: 1 - 67 Number o (more)f Channels: 6 Flow Rate per Channel (mL/min): 2 to 13 Power Supply (VAC) 230 Number of Rollers 6 Maximum Pressure (bar) 2 Power (Hz) 50 Good working condition.