Memmert ICOmed150 CO2 Inkubator Incubator Brutschrank Hot Air Sterilization

FIRLABO BC240 forced convection oven/incubator 100°C FROILABO / FIRLABO incubator Model: BC 240 Capa (more)city: 223 / 240 liters Temperature range: Ambient + 5°C to 100°C Interior dimensions: (L) x (D) x (H): 50 x 45 x 98cm External dimensions: (L) x (D) x (H): 63 x 64 x 123 cm 3 perforated stainless steel shelves, non-tilting 230 V / 50/60 Hz 1500W Weight: 82 kg Year of manufacture: 1998 Tested at 37°C

Yamato DX-302C Natural Convection Oven 28L, 115V Temperature Range Ambient +5°C to 300°C Temperatur (more)e Distribution Accuracy ± 10°C at 300°C Chamber Volume 28L Features - Economical and cost saving - Easy to use and maintain - Excellent temperature accuracy - Digital PID controller for easy operation with options for Fixed setting, Auto Start, Quick Auto Stop and Auto Stop - Increased safety and self-diagnostic functions - Calibration off-set function The Yamato DX-302C Natural Convection Oven is a cost-effective and user-friendly solution for precise temperature control needs. It features a digital PID controller with simple operation options, including Fixed setting, Auto Start, Quick Auto Stop, and Auto Stop. The oven operates within a temperature range of room temperature +5°C to 300°C, with a control accuracy of ±1°C and distribution accuracy of ±10°C at 300°C. It can reach its maximum temperature in approximately 45 minutes. Constructed with a robust stainless steel interior and an electro-galvanized steel sheet exterior coated with melamine resin, this 28L oven is easy to maintain. It's insulated with glass wool and uses a 0.9 kW iron-chrome wire heater. The oven includes two 33 mm exhaust ports on top, a microprocessor-controlled PID temperature controller, digital setting and display methods, and a versatile timer. Safety features include self-diagnostic functions, a key lock, hydraulic overheat prevention, and an electric leakage breaker. The internal dimensions are 300x310x300mm, and external dimensions are 400x440x630mm. It can support a shelf plate load of 15kg and offers six shelf rest steps with a 35mm pitch. The oven weighs about 23kg and is compatible with AC115V 9.5A making the Yamato DX-302C an ideal choice for various precision heating requirements. INCLUDED: The Yamato DX-302C Natural Convection Oven 28L, 115V includes: - 2 x Stainless Steel Punching Metal Shelves w/ Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Polyscience LS51MX1A110C LS5 Benchtop Chiller with Centrifugal Pump, 120V, 60Hz The LS-Series Compac (more)t Chiller provides cooling power for demanding applications and serves as an economical alternative to tap water cooling systems. It features a microprocessor-based controller, digital temperature display (C or °F), and simple operation and maintenance. To optimize cooling efficiency and performance, this sophisticated Chiller also features a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended. The Chiller is equipped with either a magnetic drive centrifugal pump or a turbine pump. Wetted parts within the recirculation system are brass, copper, stainless steel, EPDM rubber, Alcryn, nylon, PVC, and polyethylene. Features Optimized for high performance at low temperatures Capable of cooling multiple rotary evaporators WhisperCool® Environmental Control System Large, easy to read LED display Space-saving design Cooling at ambient temperatures as high as 35C Low flow shutoff and alarm, high and low temperature alarms Simple setup, operation, and maintenance Centrifugal or turbine pump Fluid level indicator RS232 communication and external water filter optional INCLUDED: The Polyscience LS51MX1A110C LS5 Benchtop Chiller , -20°C to 40°C, 1290W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Polyscience LM61MX1A110C LM6 Benchtop Chiller with Centrifugal Pump, 120V, 60Hz3D Visualization of t (more)he Polyscience Benchtop ChillerThe rendered image can be freely rotated in a full 360-degree view, allowing you to zoom in, pause, and explore every angle. For enhanced detail, the rendering can also be displayed in full-screen mode. This 3D model is designed exclusively for visualization purposes and may not accurately represent the actual appearance of your product. Your browser does not support iframes. LM-Series and MM-Series Compact Chillers provide cooling power for demanding applications and serve as economical alternatives to tap water cooling systems. They feature a microprocessor-based controller, digital temperature display (C or °F), and simple operation and maintenance. To optimize cooling efficiency and performance, these sophisticated Chillers also feature a modulated refrigeration system. As a result, temperature stability is greatly enhanced and compressor life extended. LM-Series and MM-Series Chillers are equipped with a magnetic drive centrifugal pump. Wetted parts within the recirculation system are brass, copper, stainless steel, EPDM rubber, Alcryn, nylon, PVC, and polyethylene. Features Optimized for performance at low temperatures Ideal for benchtop rotary evaporators Large, easy to read LED display Space-saving design Cooling at ambient temperatures as high as 35C Low flow shutoff and alarm, high and low temperature alarms Simple setup, operation, and maintenance Choice of two different centrifugal pumps Fluid level indicator RS232 communication and external water filter optional INCLUDED: The Polyscience LM61MX1A110C LM6 Benchtop Chiller , -10°C to 30°C, 420W; 120V includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Maximum temperature: 300°C Speed: 0 – 1400 rpm Heating plate surface: 135 x 135 mm

The Stuart sample concentrator, when used in conjunction with a Stuart block heater, uses the princi (more)ple of solvent evaporation to concentrate samples. When heat, applied to the samples by the block heater, is combined with a stream of inert (usually nitrogen) directoed onto the surface of the solution, vapour is rapidily driven off and the sample is quickly concentrated. A large number of samples can be processed in a matter of minutes. Temperature Range: Ambient +8°C to 200°C Temperature Stability at 37°C: ± 0.1°C Uniformity Within Block at 37°C: ± 0.1°C Uniformity Within Block at 130°C: ± 1°C Display Resolution: 0.1°C Dimensions (w x d x h): 310mm x 280mm x 115mm Net Weight (no blocks): 3.2 kg Equipped with 3 SHT1/16 blocks Capacity 12 holes with 16 mm tube diameter

Medical refrigerator, with glass door, produced by B Medical Systems - Integrated B Medical Systems  (more)multifunction electronics - High quality stainless steel, certified antibacterial, for better longevity and easy hygiene control - High internal volumetric utility, very versatile, thanks to the multiple intuitive guides that allow modularity - Internal modules and tracks fully compatible with other ML / MP models - Large storage capacity Specific features of the ML 670 SG model Preset temperature: +5°C Adjustable temperature in 0.1°C increments: +4°C to +15°C Cold / hot temperature alarm limit: +2°C / +8°C Resistance over time (from +5°C to +10°C): 2 h Climate class (ambient temperature range): SN / ST (+10°C to +32°C) Defrost: Natural Type of refrigerant: R290 Internal dimensions W x D x H (mm): 1544 x 560 x 707 Heat emission (Kcal / h): 31 Compressor running time (%): 16

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.

HX7 scale’s multi functions Many functions, many interfaces and great robustness (IP66/ IP68)  (more)mean many possibilities for you to use this advanced scale. Tomorrow you can apply it to a different process than today – that’s the multifunctionality. That’s the saving! Use the potential Barcode scanners, receipt printers, label printers, external displays, control buttons, light signalling towers and other controlling/ signalling devices – thanks to multipurpose software, HX7 scale can work with all of them. You can easily connect them thanks to the fact that the balance is equipped with interfaces: RS232, RS485, USB, Ethernet, 4 IN/ 4 OUT. Optionally, the balance can be equipped with 12 IN/ 12 OUT and analog output module. You can find all accessories in our regular offer. And if you have questions about compatibility, our experts will help you. Easy and pleasant Simple and convenient operation with a 7-inch color display. Perfectly visible messages additionally supported by bargraph. The top part of the operation panel features a bar graph consisting of 9 red and green diode fields. The bar graph is a graphic visualisation informing the user on a current net weight of a product presented with reference to the scale range or declared min and max thresholds. The bracket allows the terminal to be placed on any flat horizontal surface or screwed to the wall with adjustable angle. The power of steel The use of stainless steel guarantees you a long life for the scale. It is not afraid of contact with moist objects or accidental splashes. The construction of the scale is made of powder-coated steel with a stainless steel weighing pan. This guarantees you work for many years, and what’s more, powder-coated steel is more environmentally friendly than traditional painting methods. Not just weighing But also parts counting, dosing, percent weighing and formulations. The power of HX7’s working mods. Do you need ALIBI? There you have it. ALIBI memory is like a black box of a scale. It records all measurements taken on the device. The ALIBI memory cannot be modified or erased. Referring to stored weighings you can generate weighing reports, formulation reports and reports on performed control processes. Single weighing is stored in the ALIBI memory as long as it is specified by a Weighing Storage Period (days) parameter.

Ohaus VXMPDG Digital Microplate Vortex Mixer, 120V Orbit 0.1 in (3.5 mm) Speed Range (On Mode) 300  (more)to 2,500 rpm Control Digital Features - Digital control system with exact speed adjustments from 300 to 2500 rpm in On Mode and up to 3500 rpm in Touch Mode - Designed for continuous-duty operation, ideal for ELISA assays, PCR preparations, and other lab applications - Independent LED displays for simultaneous speed and time monitoring - Compact 0.1-inch orbit ensures efficient mixing of microplates - Robust Cycoloy construction provides durability and stability during high-speed mixing - Includes a single microplate adapter and cup head for versatile application - Weighs 11.7 lbs. and is TUV certified for safe operation in lab environments The Ohaus VXMPDG Digital Microplate Vortex Mixer, 120V, is engineered for precise and reliable mixing of microplates across a wide speed range. Ideal for continuous-duty lab applications, this digital model offers exact speed control from 300 rpm to 2500 rpm in On Mode, and up to 3500 rpm in Touch Mode, ensuring repeatable results for ELISA assays, PCR preparations, and other critical tasks. The compact design, featuring a 0.1-inch orbit, is perfect for efficiently mixing microplates, while the independent LED displays allow for simultaneous monitoring of speed and time settings. Constructed with durable Cycoloy and equipped with a microplate adapter and cup head, this mixer guarantees stability and safe operation even at high speeds. Weighing 11.7 lbs., it is TUV certified and operates within a working environment of 39°F to 104°F (4°C to 40°C) with 20% to 85% non-condensing humidity. The mixer’s dimensions are 10.5 in x 4.5 in x 5.4 in, and it consumes 30W of power. INCLUDED: The Ohaus VXMPDG Digital Microplate Vortex Mixer, 120V includes: - Microplate Adapter - Power Cord - Two Year Manufacturer's Warranty

Benchmark MAGic Clamp Large Universal Platform The Benchmark MAGic Clamp universal platform for flas (more)ks & tube racks (18" x 18") is compatible with many Benchmark shakers. Click Here to View Product Video INCLUDED: The Benchmark MAGic Clamp Large Universal Platform includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty