Memmert BE 500 Incubator

This was removed from a university lab where it was surplus to requirements. The unit powers up and  (more)is in full working order. It has been extensively tested and recertified at our facility but will require calibration on installation. It is in good cosmetic condition with marks from use. Internal Dimensions: L 86cm x W 56cm x H 47cm.Shaking area Dimensions: L 76cm x W 46cm.

Wheaton 753680-2 Reach In Incubator This was removed from a university lab where it was surplus to  (more)requirements. The unit powers up but would not heat up further than 35˚C. It is sold for spares/repairs.

This item has just arrived in our stock. Please enquire for further details.

Varioshake shaking incubator These LAUDA tools are renowned for being extremely reliable and suitabl (more)e for heavy use. Specialized in gentle mixing and vigorous shaking, these shaking incubators are used for applications that require repeatable orbital movements and temperatures up to +70°C with excellent stability. They are preferred by standard or research laboratories for incubation, fermentation, homogenization, chemical and biochemical reactions, enzyme and tissue studies, as well as for the cultivation of bacterial cultures. Applications: homogenization, incubation, fermentation or chemical and biochemical reactions. The control panel features soft-touch keys with clear symbols. It will therefore be very easy to set the temperature, the stirring frequency or the incubation time quickly and precisely, rest assured that the technology of these instruments will exactly reproduce the set values. The temperature - Temperature regulation is controlled by a microprocessor, PID type with RS232 interface. - The temperature distribution is optimal throughout the interior of the cabinet. - Temperature setting and display: digital, LED, in 0.1°C increments. - Temperature range: from 8°C above ambient temperature to + 70°C. - Temperature range (with cooling coil; not included): 20 to 70°C, depending on the cooling medium used and the ambient temperature. - Electronic monitoring of the temperature controllers activates visual and acoustic alarms in the event of a fault. In these cases the heating switches off automatically and the cause of the anomaly is shown on the display. Agitation and Incubation - Quiet and robust stirring mechanism with gentle start and smooth, load-independent orbital motion - The orbital motion can be turned on and off - Shaking frequency and incubation time can be set thanks to the microprocessor. - The timer continuously displays the remaining incubation time and acoustically signals its expiration. Specific features of the VS 150 OI model This model, with a liftable acrylic glass cover, consists of an external housing made of electrolytically galvanized and powder-coated sheet steel. The vibrating platform, made of aluminum, has 4 plastic pins to accommodate a vibrating tray or a universal support. - Capacity of 2 agitator trays; for containers over 180 mm only 1 tray can be used - Temperature stability ±0.2°C - Shaking frequency: 20 to max. 250 min-1 - Stirring width: 30 mm - Usable volume 150 L - Shaking frequency min. 20 min-1 - Shaking frequency max. 250 min-1 - Amplitude of shaking 25 mm - Load capacity max. 20 kg - Timer from 1 minute to 999 - Vibrating platform width 674 mm - Vibrating platform depth 540 mm - Capacity approx. 150 L / 2 stirring trays - External structure in electrolytically galvanized steel sheet, powder coated

Temperature: Ambient to 4°C, digitally adjustable and digitally readable per 0.1°C Stainless steel i (more)nterior Dimensions (WxDxH): 760 x 820 x 2030 mm Internal dimensions (WxDxH): 530 x 650 x 1450 mm Includes 4 height-adjustable grids.

BINDER BD-115 incubator / drying oven with forced convection 100°C Model: BD115 Capacity: 115 liters (more) Temperature range: Room temperature plus 5 °C to 100 °C With forced ventilation Inner glass door Integrated digital temperature display 2 shelves Power supply: 230 V, Frequency: 50-60 Hz, Power: 400 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83.5 x 75 x 70.5 cm Weight: 61 kg Tested at 37°C Warning, presence of a persistent odor

This listing is for a Polar Refrigeration CDO80 Refrigerator. The unit is in full working condition (more) and is ready for immediate release. Optimize your kitchen space with the Polar Refrigeration CDO80 Refrigerator, a compact and efficient cooling solution designed for professional kitchens. This stainless steel table-top refrigerator is perfect for establishments where space is limited but reliable refrigeration is essential. Key Features: Compact Design: Measuring 85.5(h) x 60(w) x 58.5(d) cm, the CDO80 fits seamlessly under worktops, ensuring easy access to your ingredients while maximizing your kitchen layout. Robust Storage Capacity: With a net capacity of 64 liters and equipped with 2 sturdy adjustable shelves plus 1 half shelf, this refrigerator allows for optimal organization and storage of your culinary essentials. Energy Efficiency: Rated with an energy class of A, the CDO80 features 40mm insulation for reduced energy consumption, translating to lower operating costs and a more eco-friendly kitchen. Technical Specifications: Temperature Range: Maintains a precise cooling environment between +2°C to +5°C, ideal for preserving freshness. Power Supply: Operates on 230V, with a power output of 120W and a daily energy consumption of 1.12 kWh. Weight: Weighs 44 kg, featuring fixed wheels for easy positioning and adjustable feet for stability. Benefits: User-Friendly Controls: The accurate digital temperature control and display ensure that your food items are stored at optimal temperatures, while the simple manual defrost program makes maintenance easy. Enhanced Security: The reversible door comes with a lock, providing added security for your valuable ingredients. Versatile Usage: Designed for medium use in ambient temperatures up to 30°C, making it suitable for various professional kitchen environments. The Polar Refrigeration CDO80 Refrigerator is your ideal companion for efficient food storage in a compact format. Elevate your kitchen's operational efficiency and ensure the freshness of your ingredients with this reliable refrigeration solution today!

Labconco 9000722 WaterPro PS HPLC/UF Hybrid Polishing Station with Dispensing Gun, 115V, 60Hz Featur (more)es - Timed dispense for unattended operation - Automatic/intermittent recirculation through polishing loop to maintain water quality, minimize bacterial growth and reduce rinse up time - Attractive and corrosion-resistant Type 304 stainless steel front panel - Unpigmented virgin natural polypropylene bowls have no impurities to contaminate water. - Water quality alert. LED flashes the actual megohm-cm when water quality falls below set point. - Built-in dispensing center - Quiet 1/4 hp motor and rotary vane recirculation pump - Dispensing valve - Wall mountable - TOC dump valve allows a small portion of purified water to drain during automatic recirculation to maintain low TOC levels (Analytical Instrument and Hybrid models). - UV flush valve allows a small portion of the purified water to rinse the ultrafilter during automatic recirculation to extend the life of the ultrafilter (Life Science and Hybrid models). - ETL listed (115 volt models) WaterPro PS Polishing Stations deliver Type I, 18.2 megohm-cm water from the dispensing valve or optional dispensing gun at a typical rate of 1.8 liters per minute depending on feedwater flow rate and pressure, and installed purification modules.The control panel includes a timed dispense feature that allows unattended dispensing of pure water without risk of overfilling. The dispenser shuts off automatically once user-set time has elapsed. Labconco has designed WaterPro PS Stations with the right combinations of purification technologies to meet your needs. Choose from specialized stations for general chemistry, analytical, life science or combination usage. In addition, models designed for general chemistry may be upgraded with additional purification modules at a later time for use in analytical or life science applications.Click Here to View Product Video INCLUDED: The Labconco 9000722 WaterPro PS HPLC/UF Hybrid Polishing Station, 115V, 60Hz includes: - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Beam scales C315.4P2 series is stable and proved four load cells weighing solution with more versati (more)le application than standard pallet scales. The adjustable distance between the beams (up to 5 meters) enables fitting the C315.4P2 scales to different loads (cases, long bars, heavy sections). The load to be weighed can be placed on the beams by a standard fork-lift truck. Beam scales C315.4P2 series is manufactured in mild steel powder coated version. Optionally, the number of beams in a scale can be increased to 4. Beam scales features handles for easy transporting the scales to its place of use. The scales comes standard with an indicator PUE C315 series featuring backlit LCD display and function buttons. The indicator is installed on a long cable. The scale is powered from mains 230V AC, RS 232 interface comes standard. Scales is available in dual range version on surcharge.

If you buy a High Resolution Scale HY10 by July 31, 2024, you will receive each of these products al (more)ong with a FREE lifetime license for the Workflow Module. Fast and Stable Measurement The scale displays the final result even in one second. High Maximum Capacity and Accuracy in a Single Device On the large weighing pan of an HRP scale, you can weigh a load of 150 kg with a readability of 1 g and impressive repeatability. Minimum Eccentricity Error Over the Entire Range On the HRP scales, you can also weigh irregularly shaped items with a centre of gravity significantly displaced from the weighing pan axis. Parameter Stability Over Time and After Transport Retain the correct metrological parameters even after prolonged, intensive use and transport of the scale due to its resistant and robust mechanical design. Weighing Pan Dimensions Adapted to the Accuracy of the Balance Weigh with the highest readability of 0.02 g on the 360 x 280 mm weighing pan and with a readability of 20 g on the 1,250 x 1,000 mm weighing pan. Maximum Robustness IP 67 platforms with additional sealing elements to protect against dust, dirt and moisture and can be cleaned with a pressure washer. New, lmproved MONOBLOCK® The new, taller and larger MONOBLOCK® enables the best repeatability and speed in its class of weighing platforms. New HRP Platform HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. Readability of 0.01 g at 10 kg maximum capacity and 0,2 g at 120 kg maximum capacity. Repeatability down to 0.01. Higher resistance to changes in ambient conditions. The platforms are so robust that they can be cleaned with a pressure washer. Transport protection that stiffens the structure during transport, eliminating any unwanted stresses. Platforms with a maximum capacity starting at 300 kg include transport handles, which makes them easy to move. Platforms of IP 67. PUE HY10 Terminal HY10 terminal is a constructional component of industrial multifunctional load cell scales, it connects with RADWAG high resolution platforms and weighing modules. High Level of Protection HRP scales have additional sealing elements to protect them from dust, dirt and moisture. This allows them to be cleaned with a pressure washer.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW