Heidolph Incubator 1000 High Hood XL

Sanyo MCO-18AC CO2 Incubator This was removed from a university lab where it was surplus to requirem (more)ents. The unit powers up and has been tested with a digital thermometer (not included). It is in good working order. It is in good cosmetic condition. This unit has been professionally serviced and is in full working order. The service report is available on request.

Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program:  (more)60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Adjustment range O₂: 1 to 20% Setting accuracy O₂: 0.1% Max. number of internals: 10 (3 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

Temperature range: Ambient +5°C to 50°C Relative humidity: <90% at 37°C Humidity source: Water pan M (more)aterial: Stainless Steel Chamber material: Polished stainless steel Capacity: 184 L Interior dimensions (DxWxH): 508 x 541 x 681 mm Dimensions (LxWxH): 635 x 668 x 1003 mm Weight: 118 kg CO₂ module is defective and incubator is retrofitted to a normal incubator.

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

Recovery time after 30 seconds door open at 37°C: 5 min Temperature fluctuation at 37°C: ±0.1K Tempe (more)rature range: 7°C above ambient temperature to 60°C Temperature variation at 37 °C: ±0.4 K Auto-sterilization with hot air at 180°C Humidity range: 90 to 95% RH Double-pan humidification system with condensation protection CO₂ measurement: IR CO₂ range: 0 to 20 Vol.-% CO₂ CO₂ Recovery time after 30 seconds door open at 5 Vol.-% CO₂: 5 min Dimensions (H x W x D): 1070 x 740 x 715 mm Internal dimensions (H x W x D): 750 x 560 x 500 mm Capacity: 210 litre Weight: 129 kg

Tray for termodesinfectadora Miele O188/2. New to brand new. Valid for models G 7883, G 7893, G 7883 (more) CD, PG 8535 and PG 8536

An additional anti-draft chamber dedicated for mass comparators APP KO series. It is intended for in (more)struments operating in unfavourable conditions (air movement, air gusts). The anti-draft chamber is installed on a weighing table, and a mass comparator is placed inside the chamber. The chamber features slidable side and top glass doors, thus ensuring free access to mass comparator&rsquo;s weighing chamber. All components of the anti-draft chamber are made of metal and glass with conductive coating for eliminating influence of electrostatics on a measurement result.

Class M1 mass standards are versatile measuring tools characterized by their high precision and vers (more)atility in laboratory, industrial or commercial applications. Classified as M1 metrology class, they are valued for their versatility and accuracy in mass measurement. M1 mass standard: flat polygonal sheet Nominal value: 2 mg Material: aluminum M1 Class Mass Standards &ndash; Key Features High-Level Precision - M1 class mass standards are designed to ensure precision in mass measurements. Permissible deviations from the actual mass are set with strict standards. Versatility of Applications - Characterized by versatility, M1-class standards are used in fields such as laboratories, industry, commerce and other areas requiring precise weight measurements. Measurement Stability - M1-class mass standards are stable over time, meaning that they maintain their measurement precision even despite prolonged use. This feature is especially important for tools that are used regularly. Operation in a Wariety of Ambient Conditions - M1 class mass standards are designed to cope with both laboratory, industrial and commercial conditions. Application 1. Analytical Laboratories In analytical laboratories where precise measurements are crucial, Class M1 mass standards are used to calibrate medium-precision balances. 2. Manufacturing Industry In the manufacturing industry, where product quality control is important, M1 class mass standards can be used to calibrate balances used in the manufacturing process. 3. Weighing Trade In the weighing trade, where measurement precision is required by law, M1 class mass standards can be used as a reference for calibrating commercial balances. 4. Testing Laboratories In research laboratories, Class M1 mass standards can be used to ensure precise weight measurements. Class M1 mass standards are versatile tools that are used in various areas of life. Their ability to adapt to different conditions makes this class of standards highly valued in the world of science, industry and commerce alike.

Ohaus PX124/E Pioneer Analytical BalanceThe OhausPX124/E Pioneer PX Analytical Balance combines esse (more)ntial weighing functionalitywith competitive performance, offering high accuracy and repeatability forapplications in laboratory, industrial and education settings with internalcalibration. The PX124/E weighing plate has a maximum capacity of 120 gramswith a readability of 0.0001 grams and a weight stabilization time of 3 seconds.The PX124/E is affordably priced, intuitively designed for intelligent operationwith a second line display for additional information, and USB and RS-232connectivity for easy communication. 120 gram weight capacity Readability (grams): 0.0001 Pan size (diameter): 90 mm Stabilization Time: 3 seconds External Calibration Model The PX offers high accuracy and repeatability for essential weighing applications in laboratory, industrial and education settings at an economical price point Featuring a cast metal lower housing, sub-pan and stainless steel weighing pan, the PX is durably constructed for versatile, long-term use The PX features a second line display for additional information or guidance Static removal bar for convenient grounding USB and RS-232 connectivity for easy communication Click Here to View Product Video INCLUDED: The Ohaus PX124/E Pioneer Analytical Balance includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Avoiding all risks of cross-contamination, BagMixer 400 P is an easy-to-use and powerful lab blender (more). Adapted to all kinds of applications and with a guarantee of optimal bacterial extraction, it is a great tool for lab microbiological analyses. Leak free Q-tight system 270° opening door All stainless steel Compact and ergonomic Door weight: 1050 g Blending time: 30, 60, 90, 120, 150, 180, 210 s, ∞ Blending speed: fixed speed of 8 strokes/s Dimension (w x d x h): 260 x 390 x 290 mm Weight: 16.5 kg Capacity: 50-400 mL Unbreakable shock absorbers

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW