Dry bath incubator, heating block model NB-12-0006 NEOBIOTECH NEOBRITE

Quality, reliable and affordable incubators. Additional technical features: - Powerful and fast refr (more)igeration system - Working temperature from 0°C to 100°C - External structure in oven-painted steel sheet - with antacid epoxy powder - Forced ventilation - Internal chamber completely in stainless steel - Second door in tempered glass - Display resolution 0.1 - RS-485 output - Data management software, cable and USB adapter as standard - Sterilization cycle (160°C for 2.5 hours) Uniformity of temperatures: - at 4°C: 0.7°C - at 37°C: 0.5°C - at 60°C: 1.0°C Temperature stability at: - at 37°C: 0.2°C Time to reach temperature: - at 37°C: 5 minutes - at 44°C: 6 minutes - at 60°C: 6 minutes Quality materials: - External structure in steel sheet painted with anti-acid epoxy powder - Inner chamber in 18/8 stainless steel - Internal door in tempered glass

A programmable laboratory incubator with multiparametric microprocessor with the possibility of memo (more)rizing 4 programs with 8 segments each. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     External structure in steel painted with anti-acid epoxy powder     Inner chamber in 18/8 stainless steel     Ergonomic handle, easy to use and robust STANDARD:     PID thermoregulator with multi-display and adjustable temperature up to 80°C     4 storable programs with 8 segments each     Setting up ramps in °/min     2 shelves     pipe on the back for exhaust fumes with front opening/closing adjustment device     10 mm hole on the upper side     Safety class DIN 3.1, the highest     IP protection: 42 INSTRUMENT SAFETY SYSTEM The oven has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of ° (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. Programmable incubator ICT-R 52 FALC

Yamato IN-604WMK-115V Programmable Refrigerated Incubator with Window & MK-161 Shaker 143L, 115V (more) Temperature Range -10°C to +50°C Temperature Distribution Accuracy ±1.0°C (refrigerator in continuous operation at 37°C) Chamber Volume 143L Features - High accuracy temperature control and temperature distribution - Inner glass door keeps temperature stable during sample observation - Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention (IN604W/804W) - Interior light for better sample visibility (IN604W/804W) - Optional slide shaker table available to put in and take out samples easily (IN604W) Low temperature 143L forced convection incubator applicable for low temperature tests and environmental tests. Designed with a large dual glass door and inner door that forms a triplex glass door for improved heat retention. Programmable. High accuracy temperature control and temperature distribution. Optional slide shaker table available to put in and take out samples easily. Comes with a compact shaker. Operating temperature range: -10 - + 50° C INCLUDED: The Yamato IN-604WMK-115V Programmable Refrigerated Incubator with Window & MK-161 Shaker 143L, 115V includes: - 3 x Shelves w/ 6 x Brackets - Power Cord - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V Temperature Range 0°C (a (more)t least 20°C below ambient) to 70°C [+10°C to 40°C with light] Convection Forced Ventilation by Peltier Fan Chamber Volume 1360L (48.0 cu. ft.) Features - Utilizes advanced Peltier Technology for unmatched energy efficiency - Rapid heat-up, cool-down, and recovery times enhance operational efficiency - Provides absolutely homogeneous temperature distribution for consistent results - Fan integration in Peltier elements ensures optimal temperature control and energy transfer - Refrigerant-free operation, making it environmentally friendly and low maintenance - No compressor required, saving valuable laboratory space and minimizing noise and vibrations - Interior fully sealed to minimize sample drying and prevent internal condensation - Constructed from high-quality, corrosion-resistant stainless steel for durability and ease of cleaning - User-friendly interface for easy operation and precise temperature management The Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V is a paragon of efficiency in the realm of temperature-controlled cultivation. This incubator, powered by Memmert's advanced Peltier Technology, sets new standards in energy efficiency, significantly reducing operating costs compared to traditional compressor-based climate chambers. Its rapid heat-up, cool-down, and recovery times make it highly effective for a variety of applications including microbiological analyses, bacterial count determination, and shelf-life tests of dairy products. Designed to provide homogeneous temperature distribution, the IPP1400eco ensures sensitive temperature control with minimal fluctuations, promoting unique temperature homogeneity. Integrated fans within the Peltier elements facilitate rapid energy transfer and optimal temperature distribution, further enhancing the incubator’s performance. The unit’s completely sealed interior minimizes the risk of sample drying out and prevents condensation within the working chamber, with any moisture forming externally on the Peltier element during the cooling process. Notably, the IPP1400eco operates without a compressor, which not only saves space in the laboratory but also ensures operation is exceptionally quiet and vibration-free. Constructed from high-quality, corrosion-resistant stainless steel, the incubator is both durable and easy to clean. Its user-friendly interface and precise temperature control system, adapted specifically for stable and homogenous temperature management, makes the IPP1400eco an indispensable tool for laboratories aiming for superior efficiency and reliability in their research environments. INCLUDED: The Memmert IPP1400eco Peltier-Cooled Forced Circulation Incubator 1360L, 115V includes: - 4 x Stainless Steel Wire Shelves - Anti-Tilt Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Benchmark H3022 Incu-Shaker 20LR Stackable Refrigerated Shaking Incubator Speed Range 30 to 300 RPM  (more)Temperature Range Ambient -20°C to 60°C Temperature Uniformity ± 0.5°C at 37°C Features - Stainless steel chamber provides premier temperature uniformity - Proven reliable, maintenance-free Incu-Shaker motor drive system - Bright, intuitive touch-screen controls - Instantly change flask clamps with MAGic Clamp accessories - Included pull-out adjustable shelf for static incubations - Stacking capability of up to 2 units - 2 Year Manufacturer's Warranty

The H315 waterproof scale Made to work in high humidity conditions and even direct contact with wate (more)r. Designed for precision measurements, making it used in situations where weighing readability is crucial. The power of steel The use of stainless steel for the construction guarantees you a long life for the balance. It is not afraid of contact with moist objects or accidental splashes. The robustness and strength of the design of the platform scales makes it possible to weigh large objects, such as pallets of goods. The stable platform is resistant to vibration, which is important when weighing large objects. Not just weighing But also parts counting, percent weighing, animal weighing and peak hold. The power of H315’s working mods. Do you require fast and repeatable weight measurement under difficult conditions? The H315 scale is made for that! It has been with us for years, and will stay for a long time to come The LCD display has accompanied us for long years. During this time it has proven its reliability. It guarantees the readability of the result from many angles and is energy efficient. Inner power No access to mains power? Power failure? No problem. Thanks to its internal rechargeable battery, the H315 scale allows many hours of operation without mains power (up to 7 hours). Battery power supply is available at an extra charge. As standard, the scale is equipped with a RS232 cable, to which you can connect most of the accessories from our range.

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content – of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160°C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer’s accuracy and sensitivity. 10-Inch Display Bigger screen – 10’’ – means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light – an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note – Note Down Your Conclusions It’s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Eppendorf FA-30x2 Fixed Angle Rotor The Eppendorf FA-30x2 Fixed Angle Rotor, is a centrifuge rotor d (more)esigned for use with the Eppendorf 5910R/Ri centrifuges. This rotor has a maximum speed of 13,700 RPM and a maximum relative centrifugal force (RCF) of 20,984 x g. It can accommodate a maximum capacity of up to 30 × 1.5/2 mL tubes, making it ideal for high throughput applications. INCLUDED: The Eppendorf FA-30x2 Fixed Angle Rotor includes: - Eppendorf FA-30x2 Fixed Angle Rotor - Aerosol-tight Lid - Full 1 Year Parts and Labor Warranty Eppendorf FA-30x2 Fixed Angle Rotor SpecificationsMaximum Speed13,700 RPMMaximum RCF20,984 x gMaximum Capacity30 × 1.5/2 mL tubesCentrifuge CompatibilityEppendorf 5910R/RiDownloadsTechnical Specification Download Request a Formal Quote .downloads-section { justify-content: center; }

Benchmark MyFuge12 Mini Centrifuge Unlike traditional mini centrifuges, the new MyFuge 12 eliminates (more) the need to change rotors when switching between microtubes and PCR strips. The included, unique COMBI-Rotor is all that is required for running 12 microtubes and/or 4 PCR strips. With a fixed speed that produces 2,000 x g, this centrifuge is perfect for quick spin downs. Simply close the lid and the unit quickly ramps up to 5,500 rpm. Open the lid, and the rotor quickly decelerates for removal of samples. At just 5.5 inches wide and less than 4.5 inches tall, the MyFuge 12 truly is a personal microcentrifuge with unmatched capacity and flexibilty. INCLUDED: The Benchmark MyFuge12 Mini Centrifuge includes: - COMBI-Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW