LAUDA VS 45 OI shaking incubator

LED illuminated shelves Homogeneous illumination and constant temperature ensure the same conditions (more) between the different samples, on the entire shelf. FOC 200IL is ideal for a wide variety of applications including plant growth, seed germination, cultivation, insect and small animal husbandry, cultured bacteria and fermentation studies FOC200IL is equipped with 2 illuminated shelves each consisting of six LED bars mounted horizontally in the lower part, so as to illuminate the shelf below. It is also equipped with a timer for the lights. Thermoregulation and thermal stability at their best - The Auto-Tuning thermoregulation system guarantees excellent thermal homogeneity and stability (± 0.5°C) - Ecological cooling system and low operating costs - Selectable incubation temperature and working range from 3°C to 50°C - Uniform temperature thanks to VELP ventilation technology - 3-digit DIGITAL DISPLAY, resolution 0.1°C - Transparent internal door for observation of the sample without temperature alterations - Customizable lighting cycle timer - Equipped with 2 illuminated shelves (30,000 lux / shelf), each with six LED bars mounted horizontally under the shelf - Volume of 169 liters net - Internal sockets to power devices - Intuitive digital interface, with three buttons for easy setup of the instrument - Constant monitoring according to GLP (Good Laboratory Practice) - Adjustable recording time (in case of connection to VELP Ermes and TempSoft ™) - The optional TempSoft ™ incorporates high / low alarm thresholds - Quick and easy calibration - Control up to 10 FOC Connects. - Set the work ramps (different times and temperatures) and the desired setpoint, with the possibility of minimum and maximum temperature alarm thresholds - Monitor the internal temperature with dedicated graphics - Export data in multiple formats - Store test data in accordance with Good Laboratory Practice (GLP)

Incubator CO2 BJPX-C Series. Models: 50 L (BJPX-C50), 80 L (BJPX-C80) and 160 L (BJPX-C160). Shirt  (more)air (optional for BJPX-C160 water jacket). Temperature range RT+5 to 60ºC. Stability ± 0.2 ° C uniformity (at 37ºC) ± 0.3 ºC. Range CO2 0 - 20%. Control, CO2 by infrared sensor. Sterilization by UV lamp, model shirt ire (optional water jacket).Timer 999 h, or continuous. Alarm of over-temperature and levels of CO2. Two trays are adjustable. Chamber of stainless steel. It shows the price for the model 50 L (BJPX-C50). For other models, use the drop-down.

Hygiena Digital Dry Block Mini Incubator.  Rango de temperatura de ambiente + 5ºC a 80 ºC. Stability (more) ±0,5 ºC. Heats to max temp in less than 15 minutes. Volumetric capacity of small tube incubator blocks = 1,5mL. Timer range: 1 min - 99 hr 59 min .Small Format (WxDxH): 11*15*8 cm; 0,5 kg Designed specifically for Hygiens'a wide variety of test devices.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Boekel Scientific 151500 Digital Forced Air Incubator, 5.0 cu. ft. w/ Removable Light Shield, 115V T (more)emperature Range Ambient +8°C to 70°C Temperature Uniformity ± 1.0°C at 37°C Chamber Volume 5.0 cu. ft. (141L) Features - Forced air convection provides excellent temperature stability, uniformity, and recovery time after door opening to keep incubation environment at ideal temperature - Wide temperature range for multiple applications eliminates the need for multiple incubators for different temperature ranges - Single door configuration with removable door panel for light & dark incubations eliminates multiple incubators/multiple doors - Bright easy-to-use digital display with built-in timer - Energy efficient, low-power consumption design - Two internal auxiliary outlets provides power for multiple accessories to be used within the incubator - UL, CE, CSA approved, RoHs compliant making it 100% recyclable - 2 Year Manufacturer's Warranty

The appliance is intended for the creation and maintenance of constant environmental conditions for  (more)application in the field of in vitro fertilisation (IVF), especially for the incubation of oocytes, spermatozoa and zygotes in special culture dishes for IVF application as well as for gene expression and the biosynthesis of RNA and proteins. Working-temperature range: 5°C above ambient temperature up to 50°C Standard sterilisation program: 60 minutes at 180°C (without removing the sensors) Setting temperature range: 18 to 50°C Setting accuracy temperature: 0.1°C Temperature sensor: 2 Pt100 sensors DIN Class A in 4-wire-circuit for mutual monitoring, taking over functions in case of an error Temperature variation in chamber (at 37°C): +/- 0.3 K Temperature fluctuations with time (at 37°C): +/- 0.1 K Humidity control: Peltier element limits the value of relative humidity in the interior to 93 % rh +/- 2.5 % Setting accuracy humidity: 0.5 % rh CO₂ control: Digital electronic with dual beam NDIR system, with auto-diagnostic system and acoustic fault indication, barometric pressure compensation Adjustment range CO₂: 0 to 20% Setting accuracy CO₂: 0,1% Variation in time CO₂: +/- 0.2% Max. number of internals: 10 (2 included) Max. loading of chamber: 120 kg Max. loading per internal: 15 kg Volume: 156 l Internal dimensions (WxHxD): 560 x 700 x 400 mm Dimensions (WxHxD): 719 x 1070 x 591 mm Weight: 90 kg

Under-bench cabinet depth 51cm - Length 65cm Laboratory cabinet Length: 65cm Depth: 51cm Height: 71c (more)m In melamine 2 doors On casters (hidden by the finishing profile) In good condition Slightly oxidized hinges and some small traces of wear (see photos)

The HX5.EX scale is a modern weighing instrument assuring fast and reliable measurement in hazardous (more) areas classified as zones 1/21 and 2/22. To ensure precision and excellent measurement repeatability, high quality electronic components are used. The weighing platforms offered in wide range of dimensions and maximum capacities, this combined with excellent metrological parameters enables easy selection of an instrument that meets the most demanding requirements. Standard version of the scale is equipped with 2 serial, intrinsically safe RS232 communication interfaces, and with one RS485 interface. They facilitate cooperation with equipment intended for operation in hazardous areas. Possibility to add digital inputs/outputs extends the range of instruments compatible with the indicator by automatic elements compliant with ATEX directive. More demanding customers can use the IM01.EX module, installed in the safe area, which extends the available connectors by Ethernet, USB, 4-20mA/0- 10V analog outputs, Profibus DP and additional digital inputs/outputs. This enables cooperation with external devices: barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. Scale operation requires use of a dedicated PM01.EX power supply, which is not a standard scale component. To operate the scale, order a selected type of the dedicated intrinsically safe power supply. Power supply types: PM01.EX-1 - power supply for operation in ATEX area. Used when it is required to connect the power supply to voltage source placed in hazardous area. PM01.EX-2 - power supply for operation outside ATEX area. Used when power supply connection to voltage source is carried out outside hazardous area. Complex software enables carrying out many tasks connected with mass measurement, e.g. parts counting, checkweighing and statistics. The scales feature user-friendly graphic interface, which can be customized using widgets. This and the large colour display of high resolution guarantee easy and clear transmission of data on current process. Colour bar graph significantly influences performance by signalling whether the weighing result is within declared thresholds or not.

Branson M8800H Mechanical Heated Ultrasonic CleanerFeatures - Sweep frequency eliminates standing wa (more)ves and creates consistent cavitation throughout the tank - 40 kHz rugged industrial transducers - Mechanical control located above and behind the cleaning tank in an easily accessible control tower panel and raised to avoid damage from cleaning solutions - Convenient built-in pour drains are featured on 0.5 and 0.75 gallon models, with tank drain valves incorporated on models 1.5 gallons and larger - Plastic body, chemical-resistant Easy to use mechanical timer for setting up to 60 minutes of operation, continous operation, as well as heating at 69°C/156.2°F Completely removes flux and contaminants from precision parts such as PC boards, SMDs, quartz crystals, capacitors, and many others Can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. M Series includes 60-minute mechanical timer and continuous operation. MH Series includes 60-minute mechanical timer and continuous operation with heating capability. M and MH Series cleaners offer the following features:Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change.Click Here to View Product Video INCLUDED: The Branson M8800H Mechanical Heated Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Hettich 2 place swing out centrifuge rotor for 320/320R Centrifuge.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW