Radwag PS 8100.5Y.M Precision Balance

F1 Mass Standard - knob weights with adjustment chamber - set (1 mg - 100 g), plastic box Number of  (more)pieces in the set: 21 Weights 1 g i 2 g – solid masses without adjusting chamber

F1 Mass Standard - knob weights, service case. Nominal value - 250 kg.

E2-class mass standards represent an exceptional standard of precision in mass measurement. Classed  (more)as E2 metrology class, they are characterized not only by their high accuracy, but also by their versatility for use in laboratories, industry or scientific research. E2 class standard: flat polygonal sheet Nominal value: 200 mg Material: Nickel silver High Precision of measurements The mass standard is the foundation of accurate mass measurement, as it affects the quality and reliability of results in many areas. Its role in maintaining uniformity and in meeting measurement standards is crucial, making the mass standard an indispensable metrology component. Stability over Time An important feature of E2 class mass standards is their ability to maintain measurement stability over the long term. It is this stability that makes standards of this class highly valued in laboratories and industry. Calibration and Strict Quality Control Systematic calibration is a key element in maintaining E2 class standards. This process involves comparing the mass standard with other standards of known mass to confirm and maintain measurement accuracy. Versatility of Applications E2 class mass standards are designed for a wide variety of applications. They can be used in analytical laboratories, the pharmaceutical industry, scientific research or other areas requiring precise mass measurements. Applications 1. Analytical Laboratories In analytical laboratories, where precise and repeatable measurements are crucial, E2 class mass standards find their wide application. 2. Pharma Industry In drug manufacturing, where quality control plays a key role, E2 class mass standards are indispensable in the calibration process of balances. 3. Scientific Research In scientific research, especially in areas requiring the utmost precision, E2 class mass standards are an indispensable tool for obtaining reliable results. 4. Metrology Industry In metrology laboratories, E2 class standards provide a reference point for evaluating and testing other measurement standards. E2 class standards are synonymous with excellence in mass measurement. Their versatility and high precision make them an indispensable tool in laboratories around the world and improve the quality and reliability of mass measurement results.

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 105 mm Material: stainless steel with a silicone tip for standards up to 50 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

MY11 pipette calibration adapter enables calibration and/or verification of piston pipettes by means (more) of a gravimetric method using the MYA microbalance. Set content: weighing pan weighing vessel evaporation ring glass chamber with an opening for dosing Vessel capacity: 11 ml Evaporation ring is an integral part of the adapter that increases relative humidity inside the weighing chamber. With this evaporation of the liquid during calibration/verification is stopped. An integrated weighing pan enables centric loading of the vessel in the weighing chamber. The weighing pan and the vessel are housed in a glass chamber featuring an opening allowing the user to dispense liquid through it, and reducing air drafts. Adapters for Pipettes Calibration Pipette calibration adapters are intended for calibration and verification of piston pipettes using gravimetric method. Use of the pipette calibration adapter reduces maximum capacity of the balance by the mass of the weighing vessel. The table below, which presents the minimum requirements in accordance with ISO 8655-6:2022 standard, enables to select suitable adapter for pipette calibration and respective balance version. The parameters of the balance have been selected so that the expanded uncertainty of measurement in use is less than ¼ of the maximum permissible error of the test object. Nominal volume of apparatus under test V Resolution (d) mg Repeatability (s)3mg Recommended balance Microbalances Analytical balances 0,5 µl ≤ V < 20 µl 0,001c 0,01d 0,006c, e 0,03d MYA 21.5Y XA 6/21.5Y.M.A XA 6/21.5Y.M XA 21.5Y.M.A XA 21.5Y.M XA 21/52.5Y.M.A XA 21/52.5Y.M XA 53.5Y.M.A XA 53.5Y.M 20 µl ≤ V < 200 µl 0,01 0,025 XA 52.5Y XA 110.5Y XA 82/220.5Y.A XA 82/220.5Y XA 120/250.5Y.A XA 120/250.5Y 200 µl ≤ V ≤ 10 ml 0,1 0,2 Adapter for pipette calibration MY 11 XA 11 XA 11 XA 11 XA 11 XA 17 XA 17 XA 17 XA 100 XA 17 XA 100 Maximum vessel capacity 11 ml 11 ml 11 ml 11 ml 11 ml 17 ml 17 ml 17 ml 100 ml 17 ml 100 ml Weighing vessel mass ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 10 g ~ 11 g ~ 11 g ~ 11 g ~ 65 g ~ 11 g ~ 65 g a The repeatability values, in this table, apply in the volumen determination of a single channel pipette. When a single-channel balance is used for volumen determination of single channel pipettes the repeatability values are double the values of this table. c Single-channel balance. d Multichannel balance, only valid for multi-channel pipettes. Multi-channel balances of 0,01 mg readability may be uses to test multi-channel pipettes with nominla volumes below 20 µl only if the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. e For single-channel pipettes of nominal volumes of less than 2 µl, a balance with repeatability better than the values in the table shall be used so that the expanded uncertainty in use is less than ¼ of the maximum permissible systematic error of the test object. table {font-size: 12px} td {padding:10px; } tr {text-align:center;} @media (max-width: 800px) { table {font-size: 9px} td {padding: 1px 1px} }

The MW-04-2 mass converter is designed to be a component of construction of an industrial load cell  (more)scale. Depending on the needs, communication can be established via RS232, RS485. The MW-04-2 mass converter can connect with weighing indicators or the PC. It is equipped with Inputs/Outputs enabling independent control of some industrial processes, e.g.: dosing. One MW-04-2 mass converter allows to operate up to 4 weighing platforms. Construction: The converter is housed in a metal casing. Signal cables of the weighing platforms (4 pcs maximum) are fed through cable glands. RS232 is available on the M12 8P connector, RS485 may be fed through the PG11 cable gland. The device is equipped with an in-built power supply, this allows to power it directly from the mains. By standard the MW-04-2 mass converter supports 2 weighing platforms, optionally it can support 4. Area of use: Industrial load cell scales; Complex weighing systems supervised by computer system thanks to use of the Ethernet module; Connecting numerous weighing platforms to an industrial indicator; Dosing systems; Silo weighing; Discrete weighing (no weighing indicator) on a production line; Weighing in place with limited access, where instant readout of mass is not required, just record of weighings; Large embedded scales, where the converter is installed under the scale; Simple systems for chackweighing and result control Communication with the automation system due to an implemented MODBUS communication protocol. Indicator Software Functions: Designing formulas and dosing processes directly on the weighing indicator, Dosing and formulations (manual and automatic), Configuration of communication between formula making scales and actuators, Carrying out dosing and formulations on numerous platforms, Placing production orders for formulation (refers to PUE 5) with batches where the following is set: multiplier (quantity of formulation repetitions), source and target warehouse, user, scale. "Formulations" software makes use of the weighing indicators functionality to the maximum when it comes to their operation along with actuators, e.g. control of dosing valves. Additional advantage is the possibility to set an interrelated ingredient dosing on various platforms within one formulation process. Formulations and Dosing in the Industry: Industrial weighing indicators are designed on the basis of an innovative approach to formulation and dosing processes. Communication between the indicators and the modern MW-04 mass converters boosts the functionality of systems that realise both dosing and formulations. Communication interfaces enable placing the weighing platform and the indicator in a considerable distance one from another. Formulation process carried out using RADWAG indicators is highly popular in various areas of industry, the indicators enable either manual or automatic dispensing of many ingredients in accordance with a pre-defined formulation. Practically any product can be a formulation ingredient, either it is a loose material such as sugar, tea, grain, spices, powders etc. or liquid, this is possible thanks to appropriate automation. Compatibility with: PUE 5 Indicator; PUE 7.1 Indicator; PUE HY10 Indicator; PC.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Scilogex DM0636 Multi-Purpose Clinical Centrifuge The SCILOGEX DM0636 Multi-Purpose Clinical Centrif (more)uge is ideal for the centrifugation of samples in clinical chemistry, cytology, research laboratories, industrial laboratories, etc. This centrifuge is suitable for tubes with caps, blood collection or urine tubes. Fixed angle and swing-out rotors and adapters are compatible with standard tubes up to 100mL. . SCILOGEX clinical centrifuges are certified with CE, cTUVus and FCC. MCA test according to IEC/EN61010-2-20 including containment-proof and bio-safe rotor tests. Passed EN61010-2-101:2002 requirements for invitro diagnostic (IVD) medical equipment. DM0636 Multi-Purpose Clinical Centrifuge Features: - Automatic rotor detection - CPU controls all operating parameters including speed and time - RPM or G-force are simply set and displayed - Operation can be timed from 30 seconds to 99 minutes or continuous running - Timer commences once the set speed is reached, so the separation time is more accurate - 9 Acceleration / 10 Brake speed settings to ensure optimal separation - Parameters can be modified after the set speed is reached - Quick spins are possible by pressing and holding PULSE key - Interlock automatic door lock - Easy-to-read backlit LCD processing display and sound alert - A wide range of accessories available (fixed angle and swing-out bucket rotors) - cTUVus approved for UL and CSA - Brushless motor drive quickly and effortlessly accelerates the rotor to set speed - 2 YEAR WARRANTY INCLUDED: The Scilogex DM0636 Multi-Purpose Clinical Centrifuge includes: - 19400041 Swing Out Rotor - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Motic Moticam A5 Microscope Camera Highest Live Display Mode 2592x1944 Pixels Capture Resolution 5MP (more) Maximum Frames per Second (FPS) 30 FPS Features - The perfect choice for users withsophisticated applications - Performs well in many different contrasting techniques - Superb resolution versus frame transmitting rate - Features state-of-the-art sCMOS imaging unit packed in a high quality metal housing - Fits microscopes with available C-Mount for 1 / 2.8" sensor size - Still image and video capture - Still image measurement - Image adjustments - White balance - Automatic and manual exposure - Individual objective calibration system The Motic Moticam A Series of microscope cameras are digital cameras ultimately developed and designed for newcomers in digital imaging and young explorers with ambitious goals. For this reason, the newest technologies are hidden in a robust metal housing. It’s simple to use without time consuming training, thanks to the MotiConnect application software. This A5 model of the Moticam A Series is a microscope camera capable of delivering up to 30 frames per second at 2592x1944 pixels per frame. Given its higher pixel count as well as sensitive sCMOS construction, the Moticam A5 performs well in many different contrasting techniques. Time is precious and limited. For this reason alone, the Moticam A Series is easy to install and ready for immediate use. When Motic promises all-in-one, they mean that all accessories are included. A calibration slide, eyepiece adapters for any eyepiece tube, a focusable lens and even a macro tube is part of the package. The all-in-one solution for a headstart is the Moticam A Series. The MotiConnect is a free multi-platform toolbox to make the most out of your new Moticam A Series product. Capture, annotate, measure and evaluate using simple to understand and easy to use tools. This free software can also be enhanced by purchasing the more advanced Motic Images Plus 3.1. Click Here to View Product Video INCLUDED: The Motic Moticam A5 Microscope Camera includes: - 30mm and 38mm Eyepiece Adapters - Calibration Slide and Card - C-Ring - Focusable Lens - Macro Viewing Tube - Dust Cap - Power Cord - Manufacturer's Documentation - 5 Year Manufacturer's Warranty