Baker Ruskinn Invivo2 400 Incubated Glovebox and Iconic Gas Control Lab Faulty NOTE - THIS IS A SPARES/REPAIRS ITEM

This Binder CB150 CO2 Laboratory Incubator was removed from a university lab where it was surplus to (more) requirements. The system has been professionally serviced and is in full working order. A report is available on request. It is in good cosmetic condition with minor marks. It is supplied with a trolley

Sanyo MCO-20AIC C02 Incubator This item was removed from a university where it was surplus to requir (more)ement. The unit powers up and is in good working order (thermometer and CO2 sensor not included). It is in good cosmetic condition internally and externally. Internal dimensions are as follows:L57cm x W45cm x H66cm. Features:2 x Shelves

A laboratory incubator with an exceptional quality/price ratio! 100% Made in Italy and with all acce (more)ssories already included as standard. Fine temperature regulation, clear and complete display, top safety class, front regulation of the pipe on the back for exhaust fumes. MATERIALS:     - External structure in steel painted with anti-acid epoxy powder    -  Inner chamber in 18/8 stainless steel     - Ergonomic handle, easy to use and robust INSTRUMENT SAFETY SYSTEM Falc incubator has an independent electronic safety system. The electronic circuit DOES NOT depend on the main thermoregulator and will work even if the main board is broken. If the temperature exceeds the set point by a certain number of °C (set by the user), the LED will light up and the oven will continue to operate at the safety temperature. STANDARD:     - PID thermoregulator with double display and adjustable temperature up to 80°C    -  2 shelves     - pipe on the back for exhaust fumes with front opening/closing adjustment device     - 10 mm hole on the upper side     - Digital timer from 0 to 99 hours and 59 minutes + ∞     - Indication of the power used     - Auto-tuning (automatic temperature calibration)     - Possibility of manual temperature correction (e.g. with certified thermometer)     - Safety class DIN 3.1, the highest     - Manual adjustment of the over-temperature alarm     - IP protection: 42 Laboratory incubator ICT FALC

Basic incubator for small laboratories. Despite the natural ventilation, the temperature accuracy is (more) +/-0.5°C @37°C. The most important accessories such as the  plexiglass windows o the door and the 3.1 safety class (DIN), the hole for inserting a control sensor and the PID microprocessor are standard!     Inner chamber in aluminum for better heat transport.

Maximum temperature: 70°C Warm-up time (air flap closed at 25°C): to 37°C; 35 min, to 50°C; 35 min,  (more)to 70°C; 45 min Recovery time (door open for 30 sec): 2 min Air changes per hour (at set temperature with flap open): 5 Spatial temperature variation (air flap closed): at 37°C; ±1.1°C, at 50°C; ±1.6°C, at 70°C: ±2.5°C Temperature fluctuation: ≤0.5°C Maximum load: 50 kg Maximum shelf load: 10 kg Volume: 107 L Internal dimensions (DxWxH): 370 x 554 x 524 mm Dimensions (DxWxH): 610 x 895 x 696 mm Weight: 69 kg

VELP FOC 225I Refrigerated Thermostat Incubator / Drying Oven Total volume: 225 litres FOC225I Usefu (more)l internal volume: 196 litres Temperature range: 3.0 to 50.0 ° C Internal temperature indicated by a display Temperature resolution: 0.1 ° C Electronic thermoregulation system: AUTO-TUNING 2 internal electrical outlets Number of shelves included: 4 Power: 350W Weight: 40 kg Dimension (WxHxD): 540x1300x560mm (21.6x23.2x23in) With internal glass port Continuous ventilation and the Auto-Tuning thermoregulation system ensure temperature uniformity throughout the chamber. The temperature can be set from 3 to 50 °C, the reading on the display refers to the actual internal temperature. The FOC 225I is equipped with two internal sockets controlled by an external switch

This item has just arrived in our stock. Please enquire for further details.

This item has just arrived in our stock. Please enquire for further details.

IKA Pette multi 12 x 20 - 200 µlLies comfortably in your hand with uncompromising precise performanc (more)e: IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 12 x 20 - 200 µl includes: - Two Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Midi Plus Pipette Controller SARTORIUS BIOHIT FAMILY 710931 Volume: Pipettes 1 - 100 ml and Proline  (more)tips 5 and 10 ml Power supply: Battery Model: Midi Plus 710931 Gross weight: 0.658 kg Gross dimensions: 29 x 20.5 x 7 cm Rechargeable, cordless, lightweight Can be used with all plastic and glass pipettes from 1 to 100 ml thanks to interchangeable connectors Can be used with Sartorius BiohitfamilyProline tips 5 and 10 ml Linear speed adjustment Speed ​​adjustment by variable pressure on the control buttons Integrated folding stand