Hoefer miniVE

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-36591 Hybaid Maxi 14 Rotisserie Hybridisation Oven ITEM-36595 Hybaid Shake 'n' Stack Hybridisation Oven [condition: Used]ITEM-36596 Fisherbrand HU10 Mini-Plus Horizontal Gel Electrophoresis Unit [condition: Used]ITEM-36597 Hoefer Electrophoresis Unit [condition: Used]ITEM-36598 Hoefer Electrophoresis Unit [condition: Used]ITEM-36599 Luckham 4RT Rocking Table [condition: Used]ITEM-36607 UVP Transilluminator [condition: Used]ITEM-36608 Compaq TFT7010 Monitor [condition: Used]ITEM-36609 Thermo Hybaid PCR Express With Spare PCR Block [condition: Used]ITEM-39835 Hanna Instruments Water Test ITEM-39836 Jenway 9200 DO2 Meter ITEM-39766 Extech 407510 Heavy Duty Dissolved Oxygen Meter ITEM-39767 Job lot of Hanna Instruments Pocket PH Meters ITEM-38983 FluidX Xcap Microplate capper [condition: Used]ITEM-23169 Small desk fan SFE/1 [condition: Used]ITEM-39770 Hybaid PCR Express ITEM-39771 MJ Research PTC-225 Thermal Cycler ITEM-39772 Grant W6 Sonic Bath ITEM-37438 CBS Scientific EPS-300 X Power supply [condition: Used]ITEM-37439 SS 3H Hotplate Stirrer [condition: Used]ITEM-39774 Spectra Physics SP8480XR Scanning Detector ITEM-39775 Tyco Electronics LVC2KW Power Supply ITEM-39776 GS Laboratories 6593-10 CO2 Control Backup System Lab ITEM-39777 Spectra System AS3000 ITEM-39778 Test Tubes w/ Holding Rack ITEM-39779 Perkin Elmer L226-0103 Model LC-240ITEM-39101 Vevor Rolling Mill [condition: Used]ITEM-37443 Jenway 1000 Hotplate Stirrer [condition: Used]ITEM-39782 Pyrex 20L FlaskITEM-39783 Zippette Flask and Dispenser

Bio-Rad Reaction Module 96W Deep Part This item was removed from a university where it was surplus  (more)to requirement. It is in good cosmetic condition, and un-tested as we are unable to do so at our facility.

MAXIGEL ECO2 Gel tank APELEX New equipment in its original packaging MAXIGEL ECO2 complete including (more): Reference: 341000 1 double comb 21/44 teeth 1mm compatible with M.C pipettes 1 rack 20 x 24cm Power cords Lid accessories Instructions

BioRad  Mini-PROTEAN ll vertical electrophoresis system. Up to 2 gels. It Includes: tetra blot modul (more)e, 2 cassettes, buffer tank, casting system, lid with power cables and original user manual. Specifications:

This listing is for a Hamilton Microlab 500 Syringe System. The unit is in full working condition a (more)nd is ready for immediate release. The Hamilton MICROLAB 500 is a versatile, semiautomatic, precision liquid processor. Various models of the MICROLAB 500 function as either single- or dual-syringe diluter/dispensers. The MICROLAB 500 functions on the principal of liquid/liquid displacement. At the heart of each MICROLAB 500 system is a highly efficient, precision stepper motor drive that is combined with world-famous Hamilton GASTIGHT syringes. The result is a precise and accurate instrument that is very easy to set up and use

Hermle Z446 Centrifuge The Z446 universal centrifuge series offers the highest capacity of any bench (more)top Hermle-Benchmark model. With air-craft grade, premium alloy construction, the 4 x 750ml swing out rotor can withstand centrifugal forces upwards of 4,500 x g with full loads of up to 28 x 50ml or 68 x 15ml tubes. Advanced microprocessor controls allow for instant rotor identification, which automatically converts the rotational speed to the relevant g-force (rcf), preventing the user from setting a speed above the capabilities of the installed rotor. In addition to retrieving saved programs, the easy to use front panel can adjust acceleration and deceleration rates and change the end of run alarm tone. Rotor exchange is simple and requires less than one minute. An included rotor wrench can be used to loosen and install all rotors. As soon as the rotor is placed on the motor shaft, the identification process activates and the installed rotor code is displayed on the backlit LCD display. Interested in rotors and/or adapters for this centrifuge? Let us know what size tubes you are spinning, and we can help you find the right rotor and accessories for your application. INCLUDED: The Hermle Z446 Centrifuge includes: - Power Cord - Operator's Guide - Manufacturer's Documentation - 5 Year Manufacturer's Warranty

Scilogex SCI-Fill Motorized Pipette Controller, 110-220V Aspiration Speed 25mL<7s (8 shift) Dispe (more)nsing Speed Motor (8 shift)/Gravity Charging Times 2-3 Hours Features - Easy switch between motor and gravity dispensing - LED display showing battery level and adjustable coarse speed - 8 levels of coarse speeds - Touch-sensitive triggers for fine speed control - 8 hours of continuous use per charge - Lightweight, ergonomic design - Wall mount and bench top controller stand - Zero downtime, use while charging SCILOGEX SCI-Fill Motorized Pipette Controller. Rugged, reliable, easy liquid handling in BSC and new lab benches. Including wall/bench stand and 2 x 0.45um filters. Switch parts with zero tools. The trigger buttons on the Sci-Fill are concave and touch-sensitive, so the pipette controller feels nice in your hands while giving you the fine control you need for delicate tasks. Every battery charge gives you 8 hours of continuous motorizing aspirating and dispensing. The pipette gun still does its job while charging, so there’s no downtime. INCLUDED: The Scilogex SCI-Fill Motorized Pipette Controller, 110-220V includes: - Mountable Wall Holder - Operator's Manual - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

New - in original packaging.

Manufacturer: Beckman Coulter Model: CytoFLEX V0-B3-R2 Description: The device has a capacity of 15  (more)parameters, including 13 for fluorescence detection. The fully activated device has five channels of 405 nm (violet) laser, five channels of 488 nm (blue) laser and three channels of 638 nm (red) laser. Laser specifications: Violet 405 nm 80 mW Blue 488 nm 50 mW Red 638 nm 50 mW Flow cell: Permanently integrated optics and quartz flow cell with >1.3 numerical aperture. Dimensions of the flow cell: 430 μm x 180 μm inner diameter Forward scatter detection: Proprietary Homodyne FSC sensor system with silicon photodiodes and built-in 488/8 nm bandpass filter Bandpass filter Contains 13 repositionable filters: 450/45 660/10 (2) 525/40 (2) 690/50 585/42 712/25 610/20 (2) 780/60 (3) Scattering resolution: Blue (488 nm) Side scattering resolution: <300 nm Violet (405 nm) Side scattering resolution (VSSC): 80 nm Polystyrene particles The scattering performance is optimized for the resolution of human lymphocytes, monocytes and granulocytes as well as nanoparticles. Fluorescence resolution: The CytoFLEX flow cytometer is capable of achieving an rCV of 3%, with particles achieving an rCV of <3% to verify alignment. Sample flow rates: Fixed flow rates: 10, 30 and 60 μL/min User-defined flow rate control mode from 10 to 240 μL/min in 1 μL increments. Gravimetric calibration for absolute counts within CytExpert software. Other data: Voltage: 100-240 V Power: 150-250 W Dimensions: 42.5 cm x 42.5 cm x 34 cm Weight: 23.4 kg The device/system offered here has been tested and is fully functional and ready for use.