Thermo Invitrogren Benchpro 4100 Western Card Processing Station (2012)

This job lot of items comes from a variety of university laboratories. The items were no longer requ (more)ired, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale. The units have not been tested at all. ITEM-39808 MSE Centaur 2ITEM-39805 Sorval TC6 ITEM-39837 Sartorius BP 11 ITEM-35985 Micromeritics sedigraph 5100 ITEM-35986 Ibm personal system 2 model 30 [condition: Used]ITEM-35987 Epson FX-850 [condition: Used]ITEM-35990 IBM Personal system 2 monochrome display [condition: Used]ITEM-35991 Techne Genius [condition: Used]ITEM-38936 Howe GyroVap [condition: Used]ITEM-36540 Sartorius Startoclear Depth Filter Maxicaps [condition: Used]ITEM-39844 MJ Research DNA Engine Tetrad 2 PTC Peltier Thermal Cycler Lab [condition: Used]ITEM-38938 Heraeus Rotor & Buckets [condition: Used]ITEM-38939 3Com baseline Switch 2816 [condition: Used]ITEM-37437 Cryofusion Liquid CO2 Back up system [condition: Used]ITEM-37441 UVP UV/White Convertor Plate [condition: Used]ITEM-36544 IKA Vibrax VXR [condition: Used]ITEM-36552 Bruker BSPS 12 80 2 WS1212316ITEM-36554 Philips CD650 CD player [condition: Used]ITEM-36005 Invitrogen E-Gel iBase Safe Imager + iBase [condition: Used]ITEM-18758 BOC Edwards Speedivalve SP25K N 9Bar Fluoroelastomer Diaphragm Valve Lab [condition: New]ITEM-36008 Milli-Q Q pod [condition: Used]ITEM-39860 Capp CR-MI1 ITEM-39861 Ohaus Pioneer pa2102cm ITEM-39865 Bio Rad Benchmark PlusITEM-39866 Grant FH16-D ITEM-39867 Gilson 305 Pump ITEM-39868 Sartorius BP 3100S ITEM-39869 Sartorius 1212 MP ITEM-39870 Restek Electronic Flow Calibrator ITEM-36014 Box of Thermo Fisher HPLC Parts [condition: Used]ITEM-36015 Security guard hplc guard cartridge system [condition: Used]ITEM-36016 Lot of PCR equipment [condition: Used]ITEM-36017 2 x GelBond PAG Film [condition: Used]

Scale WLY for statistic control Scale WLY is intended to fast and precise determination of mass in l (more)aboratory and industrial conditions. The model line is the response for growing market demands concerning simple operation and maximum automation of the weighing process. The scales enables cooperation with barcode scanner, printer, label printer, RFID readers and standard PC devices (mouse, keyboard, USB storage device). Design and functionality All WLY scales is equipped with stainless weighing pan, TFT 5,7'' colourful touch screen and membrane keyboard. As an option the scale enables connection of an additional weighing platform to the terminal. The following functions are available: programmable proximity sensors, programmable printout templates, programmable text information for scale's operation, printouts. Scale WLY/PGC is equipped with modules that put packaged products control into practice. The module is supported by database containing products and operators lists. A control started by the scale is automatically stopped after controlling pre-defined quantity of packages (samples). Number of the packages is fixed by scales program depending on product batch size. Scales are equipped with 5,7" colourful, graphic touch screen display for previewing information concerning currently performed control and its result. Scale requires two staged verification process. Due to the influence of gravitational acceleration force the scale has to be adjusted on use site. Control cycle runs according to the following scheme: operator choice, product choice, control start, acquiring weighing records, automatic control end after certain packages number, control report print. Each carried out control is ended with a final report containing all information that is necessary for pre-packaged products control report. The report is automatically saved in scale memory and at the same time it can be printed by printer connected to scale. Scale coupling with computer program enables: keeping weighing records from successive weighments in the database, automatic printout of control processes from computer software level, sending user defined codes from scale to computer software; the codes match weighed product (product code, operator code, batch quantity, batch no., control Start/Stop), defining product codes and their descriptions (names) from the level of computer program, therefore user can assign an individual product name suitable for the company's branch. The purpose of the scale is the packaged goods control (PGC), so remember that verification (legalization) is necessary. We recommend ordering a scale with a proper verification (legalization).

Julabo DYNEO DD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz Refrigerant  (more) R290 Working Temperature Range -30°C - 200°C Cooling Capacity 440W at 20°C Features - Powerful cooling machines - Suitable for internal and external applications - Optimized cooling coil design saves space in the bath tank - Powerful and infinitely adjustable pressure pump - Flow rate 27 l/min, pressure 8.7 psi - Easy switching between internal and external circulation - Large color TFT display, multilingual interface - Central rotary knob (controller) simplifies operation - Integrated programmer for 8 x 60 program steps - Integrated external Pt100 connection - USB port - RS232 interface or analog interfaces (optional) - Bath cover included with delivery - Integrated drain makes emptying liquid easy and safe - Class III (FL) according to DIN 12876-1 DYNEO™ DD-450F refrigerated/heating circulator with an operating range of -30…+200 °C and ±0.01 °C stability. Suitable for temperature applications with circulation to an external apparatus or immersing a device in the bath tank. The DYNEO™ DD circulator incorporates easy change-over for control of fluid circulation internally or externally. A color TFT display with central rotary knob controller includes a multi-lingual interface, integrated programmer, Pt100 port for external temperature control, USB-B connection for external PC control and USB-A for data-logging. Additional communication options include an RS232 port or an analog module interface, for voltage or current control. Infinitely variable centrifugal pump capacity of 8-27 L/min with pressure to 1.5-10.2 psi. Stainless steel bath tank (3-4L) with integrated drain port. Unit fittings: M16x1 male threaded adapters including a pair of 8 and 12 mm hose barbs. 0.44kW cooling power at 20 °C with 60W at -30 °C. Options for heating power (1kW or 2kW) and refrigerant (R290 natural refrigerant or R449A synthetic refrigerant).Class III (FL) according to DIN 12876-1.INCLUDED: The Julabo DYNEO DD-450F Refrigerated Circulator with Natural Refrigerant (R290), 115V/60Hz includes: - 2 Each Barbed Fitting for Tubing 8 and 12 mm Inner Dia. (Pump Connections M16x1 Male) - Power Cord - Operator's Manual - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

IKA Pette multi 12 x 0.5 - 10 µlLies comfortably in your hand with uncompromising precise performanc (more)e: IKA introduces the IKA PETTE multi, a series of mechanical air-displacement pipettes available with either 8 or 12 channels for precise dispensing in microtiter or deep well plates. In total, there are six different models available with different adjustable volume ranges from 0.5 to 200 μl. This brings IKA's pipette portfolio to a total of 24 models: ten single-channel pipettes with fixed volumes (PETTE fix), eight with variable volumes (PETTE vario), and six models of the PETTE multi. The IKA PETTE series are used for many different applications in the modern laboratory. Color-coding simplifies rapid selection of the right pipette. The impact-resistant, UV-resistant and chemically resistant conical tip ensures reliable metering in the long-term. Improved ergonomics as a result of replaceable handles IKA pipettes include three interchangeable handles in various different shapes and materials in the delivery. The choice of the right handle for your particular hand means that the pipette can be adapted to suit your individual requirements. This ergonomic optimization permits comfortable and wrist-friendly working, and ensures that the pipette sits in your hand perfectly in daily use for easy grasping of the working points. Precise and repeatable results are thus guaranteed. Comfortable and rapid adjustment of the pipetting volume The pipetting volume is adjusted in two stages (fine and coarse). Locking and unlocking of the volume is also carried out in the same way as fine adjustment by one hand using the multifunction button. The set volume can be read off the display in large figures at any time, process-safe and clearly Straightforward ejection of the tip of the pipette After the pipetting process, the tip of the pipette is ejected quickly and without time-consuming hand repositioning simply by pressing the central multifunction button. The round design means that the single-handed ejection works equally for both right-handed and left-handed users. Robust and smooth The piston and tip cone are made from DLC-coated stainless steel. DLC stands for diamond like carbon and is a diamond-like type of carbon which exhibits high levels of wear and corrosion resistance, together with particular hardness and low frictional indices. The DLC coating means that the tip cone is particularly insensitive and also ensures that the tips of the pipettes are always in perfect condition and are securely seated, without leaks. The extremely good anti-friction properties of the DLC also mean that the pipette will only need to be re-greased on rare occasions. The benefit of the coating for the user is primarily the consistent and low level of force required when absorbing and discharging the liquid to be pipetted. Maintenance-friendly, process-secure and easy to clean Regular cleaning and maintenance of the pipette guarantees a long service life for the product. The volume unit with piston and seal can be replaced completely in just a few hand movements. The equally simple assembly is acknowledged audibly by a click and is thus process-secure. Adjusting safely and without the need for tools If you detect deviations in the framework of calibration, the pipette will generally need to be adjusted. Tools are not needed for adjusting the IKA PETTE. The user thus saves valuable time in looking for the right tool. The pipette is subsequently secured against inadvertent adjustment. Simplified acquisition, documentation and monitoring Acquisition, documentation and monitoring of equipment and processes is of great importance in most laboratories. The serial number of the IKA PETTE can be scanned from a QR Code on the housing, easily and without transfer errors. The serial number and the pipette are thus uniquely linked. Can be autoclaved at 121°C The IKA PETTE is ideally suited to heat and high-pressure sterilization. Thanks to its simple construction, the pipette can be cleaned and autoclaved either in complete or in dismantled state. Large range of pipette tips All IKA PETTE models are compatible with pipette tips from most manufacturers. Pipette tips having the standard color codes gray, yellow, and blue always fit on our pipettes, marked accordingly. This means that there is a wide range of pipette tips to choose from and you can rest assured that only suitable tips are fitted.INCLUDED: The IKA Pette multi 12 x 0.5 - 10 µl includes: - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer Warranty ( + Additional Free 1 Year Warranty Extension with IKA Registration) IKA Pette multi 12 x 0.5 - 10 µl SpecificationsParameterValueDesignAir displacement piston-operated pipetteHandlingMechanicalVolumeVariableNumber of channels12Colour CodeGrayNominal volume10 µlVolume min.0.5 µlVolume max.10 µlIncrements0.01 µlAccuracy with nominal volume±0.2 µlPrecision with nominal volume±0.1 µlAccuracy with 50% of nominal volume±0.2 µlPrecision with 50% of nominal volume±0.1 µlAccuracy with 10% of nominal volume±0.08 µlPrecision with 10% of nominal volume±0.05 µlCertificate of conformity according to ISO 8655yesAutoclavableyesPiston materialStainless steel DLC coatedDimensions (W x H x D)119 x 235 x 63 mmWeight0.160 kgPermissible ambient temperature5 - 40 °CPermissible relative humidity90 %Comparison of ModelsSpecification12 x 0.5 - 10 µl12 x 10 - 100 µl12 x 20 - 200 µl8 x 0.5 - 10 µl8 x 10 - 100 µl8 x 20 - 200 µlNumber of Channels121212888Nominal Volume10 µl100 µl200 µl10 µl100 µl200 µlVolume Range0.5 - 10 µl10 - 100 µl20 - 200 µl0.5 - 10 µl10 - 100 µl20 - 200 µlIncrements0.01 µl0.1 µl0.2 µl0.01 µl0.1 µl0.2 µlAccuracy (Nominal Volume)±0.2 µl±0.8 µl±1.6 µl±0.2 µl±0.8 µl±1.6 µlAutoclavableYesYesYesYesYesYesDimensions (W x H x D)119 x 235 x 63 mm119 x 235 x 63 mm119 x 235 x 63 mm83 x 235 x 63 mm83 x 235 x 63 mm83 x 235 x 63 mmWeight0.160 kg0.182 kg0.195 kg0.135 kg0.147 kg0.160 kg.comparison-table tr td:nth-child(2) { background-color: #fffacd; }

Hermle 24x1.5/2.0ml Rotor, Hermetically Sealed The Hermle 24x1.5/2.0ml Rotor, Hermetically Sealed is (more) a specialized centrifuge rotor designed for use with Hermle Z32-HK, Z307, Z327, Z366, and Z446 series centrifuges. The rotor is hermetically sealed, which helps to prevent contamination of samples and makes it easy to clean and maintain. The rotor has a maximum speed of 15,000 RPM (16,000 RPM with K models and 20,000 RPM with Z32-HK model only) and can generate a maximum relative centrifugal force (RCF) of 21,379 x g (24,325 x g with K models and 38,007 x g with Z32-HK model only). It has a capacity of 24 x 1.5/2.0ml tubes, and its 45° angle allows for efficient separation of samples. It should be noted that the rotor only reaches a maximum speed of 14,000 RPM when used with the Z307 centrifuge model. Overall, the Hermle 24x1.5/2.0ml Rotor is a reliable and high-performance centrifuge rotor that is ideal for use in a wide range of laboratory applications. INCLUDED: The Hermle 24x1.5/2.0ml Rotor, Hermetically Sealed includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Hermle 12 x 1.5/2.0ml rotor, Hermetically Sealed The Hermle 12 x 1.5/2.0 ml Angle Rotor (40°) is a  (more)hermetically sealed rotor designed for use in high-speed centrifugation applications. This rotor has a maximum speed of 18,000 rpm and can generate a maximum RCF of 23,547 xg, making it suitable for use in a wide range of applications. The rotor has an accel/decel time of 25 seconds and 20 seconds respectively, which ensures that samples are handled with care during centrifugation. The rotor is designed to hold up to 12 tubes with a capacity of 1.5/2.0 ml each, making it a versatile option for laboratories with varying sample sizes. Its hermetically sealed design ensures that samples are protected from contamination and spills during centrifugation. Overall, the Hermle 12 x 1.5/2.0 ml Angle Rotor (40°) is a reliable option for high-speed centrifugation applications.INCLUDED: The Hermle 12 x 1.5/2.0ml rotor, Hermetically Sealed includes: - Operator's Manual - Manufacturer's Warranty