Miltenyi Biotec MACSmix Tube Rotator Lab

Biosafe Sepax S-100 Lab This item was removed from a university where it was surplus to requirement. (more) It is in very good cosmetic condition and powers on, we are unable to test it further at our facility.

This Solentim Cell Metric Cell Imaging and Analysis Instrument was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and is in good cosmetic condition with a minor scratch on the front. The PSU is included.

5 x Fluidigm C1 Single Cell Auto Prep Systems mRNA Sequencers This job lot of items comes from a va (more)riety of university laboratories. The items were no longer required, collected from various store rooms and facilities. None of these items have been tested at our site - it is likely that some will be spares/repairs, but we anticipate that a reasonable amount should operate well. None of these items have been PAT or electrical safety tested. For this reason, we have marked these as spares/repairs as they should not be used without appropriate electrical safety checks. They are sold as a spares/repairs bundle intended to be purchased by someone who has time to test and where necessary refurbish the units. It is an excellent opportunity for anyone looking to benefit from individual equipment resale.

This item has just arrived in our stock. Please enquire for further details.

This item has just arrived in our stock. Please enquire for further details.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

4 block dry heaters Designed for daily use in the laboratory, dry block heaters are ideal for applic (more)ations that require particular temperature stability. All units house four easily interchangeable modular blocks, with 40 options to choose from. Close contact between tube and block ensures maximum heat retention for efficient heating. Analog models: economic alternative; low temperature range: +5°C above ambient temperature to 100°C; high temperature range: 75°C to 150°C; control via two temperature adjustment knobs. Digital models: for repeatable results; from 5°C above ambient temperature to 120°C; control via touch pad controls with independent and easy to read LED displays for temperature and time display; sound alarm. - Exceptional temperature uniformity and extraordinary thermal stability. - Unique single point calibration function to ensure accurate display of actual temperature (digital models) Applications Culture incubation and activation, enzymatic reactions, immunological analyzes, melting / boiling points, isothermal incubation, nucleic acid denaturation Display LED display in digital models and knob with double adjustment and markings in analog models Operation Detachable three-wire cable and plug (included). Analog models require an external thermometer or temperature adjustment tool for the setpoint Structure Painted steel armor and support bar attachment with fixing knob Construction features Keypad control and audible alarm (digital models) Technical Specifications

Memmert IN450 Natural Convection Incubator 449L, 115V Working Temperature Range At least 5°C above  (more)ambient to +80°C Convection Type Natural Convection Chamber Volume 449 L Features - Adjustable temperature range from +20 to +80 °C, with a working range at least 5°C above ambient - Spacious 449 L (15.9 cu.ft.) capacity, suitable for a wide range of applications - ControlCOCKPIT with SingleDISPLAY, adaptive PID-microprocessor controller and high-definition TFT-color display - Inner glass doors with fully insulated stainless steel exterior doors and 2-point compression locking system - Adjustable settings for temperature (Celsius or Fahrenheit), air flap position, and timer, with calibration for three user-selected temperature values - Natural convection system with pre-heated fresh air admixture through electronically adjustable air flap - Comprehensive AtmoCONTROL software for data logging, available via Ethernet or USB - Maximum chamber load of 661 lbs, with eight shelf positions and a 66 lbs load capacity per shelf The Memmert IN450 Natural Convection Incubator 449L, 115V offers a generous 449 L (15.9 cu.ft.) chamber, ideal for a variety of applications requiring consistent temperature control. With a temperature range from +20°C to +80°C, it can maintain precise settings as low as 5°C above ambient. The ControlCOCKPIT with SingleDISPLAY provides adaptive control via a high-definition TFT display, allowing easy adjustments in temperature (Celsius or Fahrenheit), air flap position, and timer settings. Featuring an inner glass door within a fully insulated stainless steel exterior with a 2-point compression locking system, the incubator combines visibility with security. The natural convection system and pre-heated fresh air admixture ensure uniform chamber conditions, while AtmoCONTROL software enables efficient data logging and management. With a sturdy design supporting up to eight shelves, a max load of 661 lbs, and advanced safety features, this incubator meets the rigorous demands of laboratory environments. INCLUDED: The Memmert IN450 Natural Convection Incubator 449L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Edinburgh Instruments Time-Correlated Single Photon Counting System This system was removed from a u (more)niversity lab where it was surplus to requirements. Although all units successfully powered on, we cannot test it completely at our facility. Condition varies as stated below each item. The system includes the following components: Edinburgh Instruments Spectrometer SystemSerial#: 178 The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the control box, PMT Cooler Controller & PC with Software. The following tests were conducted: 1. Excitation Mono Successfully Initialised2. Emission1 Mono Successfully Initialised3. Excitation Polariser Successfully Initialised4. Emission1 Polariser Successfully Initialised5. Sample Holder Temperature Successfully Read6. nF Iris did not initialise (nF Iris Cable present but unable to find port)7. TAC Range & Scaler Successfully Initialised All tests were performed using CD900 Test software. However, unable to open EAI Level 2 Edinburgh Instruments CD900 Software due to requiring Software Protection Device. Additionally, the system includes: Edinburgh Instruments Nanosecond Flashlamp HeadModel: nF900Serial#: 095Mfd: 03/2000 The item is in good cosmetic condition and pairs successfully with the Spectrometer System. Edinburgh Instruments nF900 ControllerModel: nF900Serial#: 092Mfd: 03/2000 The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included. Edinburgh Instruments CD900 ControllerModel: CD900Serial#: 112Mfd: 03/2000 The item is in good cosmetic condition with all components present. It powers on and successfully pairs with the Spectrometer System, PMT Cooler Controller & PC with Software. All cables shown at the rear are included. Lastly, the system includes an Elonex ProSentia PC, iiyama ProLite B2290HS Monitor, Elonex Keyboard & Microsoft. All items are in good cosmetic condition and in full working order. The PC runs Windows 98 and the software installed includes EAI Level 2 (requires Software Protection Device), F900 test, and Cd900t (requires Software Protection Device).

This listing is for a Merck Samplicity G2 Filtration System.The unit is in full working condition an (more)d is ready for immediate release.The Merck Samplicity G2 Filtration System revolutionizes sample preparation for High Performance Liquid Chromatography (HPLC) by offering a vacuum-driven solution that enhances efficiency and user comfort.Key Features:Vacuum-Driven Filtration: Utilizes a vacuum pump to simplify the filtration process, decreasing the manual effort often required in traditional methods.Multi-Sample Filtration: Allows filtration of 1 to 8 samples simultaneously, increasing throughput by up to 35%—perfect for busy labs.User-Friendly Operation: Designed with a simple lever mechanism, enabling quick recovery of clean samples in seconds, which aids in maintaining workflow efficiency.Millex Filter Compatibility: Fully compatible with Millex filters, ensuring reliability and effectiveness in a variety of HPLC applications.Ergonomically Designed: Reduces manual strain compared to syringe filtration, promoting better user health and comfort during repetitive tasks.Applications: HPLC Sample Preparation:Ideal for preparing samples that require filtration before analysis, particularly those that are viscous or contain particulates.Filtration of Challenging Samples: Well-suited for samples that are difficult to filter, such as those with high viscosity or substantial particulate matter, ensuring consistent results.Key Benefits:Increased Efficiency:Streamlines the sample preparation process, significantly cutting down on time and effort, allowing for quicker analysis turnaround.Enhanced Accuracy:Provides reliable filtration, minimizing the risk of contamination or sample loss, crucial for maintaining analytical integrity.Reduced Manual Fatigue:The design alleviates the physical strain associated with manual filtration methods, improving user comfort and lowering injury risk.

Temperature range: Ambient +8°C to 130°C Temperature stability (at 37°C): ± 0.1°C Temperature unifor (more)mity within block (at 37°C): ± 0.1°C Temperature uniformity within block (at 130°C): ± 1°C Display resolution: 0.1°C Dimensions (WxDxH): 235 x 280 x 115 mm Weight (without blocks): 2.3 kg Equipped with: 2x Block SHT1/16 (Tube size: 16 mm, No of holes: 12, Hole size (ØxD): 16.6 x 47 mm

M1 Mass Standard - knob weights - set (1 g - 10 kg), wooden box.