GE Healthcare / Cytiva Model S-2000 Sefia Cell Processing Unit

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

MORE DETAILS TO FOLLOW

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

This item has just arrived in our stock. Please enquire for further details.

This item has just arrived in our stock. Please enquire for further details.

This Solentim Cell Metric Cell Imaging and Analysis Instrument was removed from a university lab whe (more)re it was surplus to requirements. The unit powers up and is in good cosmetic condition with a minor scratch on the front. The PSU is included.

KNF Mini diaphragm vacuum pump LABOPORT N 86 KT.18 Model: N86KT.18 100% oil-free pumping, so media c (more)annot be contaminated when pumping and evacuating Maintenance-free, quiet running Flow rate: 5.5 l/min Weight [kg] : 1.9 Dimensions W x H x D [mm] : 90 x 141 x 164 Ultimate vacuum (max.): 403mbar (abs.) found following our proper functioning test (see photo) Year of manufacture: 2007 Signs of wear and peeling paint in places

The SilentAire Super Silent 20-A Compressor is virtually soundless and is a totally automatic compre (more)ssor with a tank pressure gauge, line pressure gauge, line pressure regulator, moisture trap/filter, safety/bleeder-valve, air-intake filter, on/off switch and a handle for balanced carrying. It includes a 0.4 gallon tank, 1/5 HP motor, offers 0.70 CFM free air with an automatic pressure switch for start-up and shut-off, factory preset at 55 PSI (on) and 85 PSI (off), but this can be adjusted for individual needs.

IKA HRC 2 Lite Cooling and Heating Circulator Working Temp. -10 to 100 °C Pump Pressure Max. 0.35 ba (more)r Flow Rate Max. 18 L/min Features - Compact refrigerated and heating circulator with 400 W cooling and 1000 W heating capacity - Ideal for tempering bioreactors, laboratory reactors, and open bath solutions - Equipped with a stainless steel mesh filter for consistent long-term performance - Large working volume of 2.5 L reduces the need for frequent refilling - Natural refrigerant R290 ensures sustainability and environmental compliance - RS 232 and USB interfaces enable direct device-to-device communication - Control and monitoring compatible with labworldsoft® and other laboratory software - Illuminated sight glass for easy reservoir level monitoring The HRC 2 lite is a compact refrigerated and heating circulator designed to handle a wide range of laboratory tempering tasks with precision and efficiency. Boasting a 400 W cooling capacity and a powerful 1000 W heating output, it achieves temperatures from -10°C to 100°C with exceptional stability. Its robust design, featuring a stainless steel mesh filter and durable refrigerant R290, ensures long-lasting performance while meeting sustainability standards. With a spacious working volume of 2.5 liters and a low filling volume of just 1 liter, this circulator offers quick temperature adjustments and minimizes the need for frequent refilling. Designed for versatility, the HRC 2 lite is ideal for tempering bioreactors, laboratory reactors, open bath systems, and measuring devices. Advanced features like LED temperature display, PID control, and a safety circuit adjustable up to 110°C make it user-friendly and reliable. The integrated RS 232 and USB interfaces allow seamless device-to-device communication and compatibility with labworldsoft® and other software. Its compact footprint, illuminated sight glass, and powerful pressure/suction pump make it an efficient and convenient solution for diverse laboratory applications.INCLUDED: The IKA HRC 2 Lite Cooling and Heating Circulator includes: - 2 x Hose olives DN 8 - USB A-B Cable - Hexagon Socket Offset by Screw Key - Screwdriver for Safety Circuit - Warranty Card - Power Cord - Operator's Manual - Manufacturer's Documentation - Two Year Manufacturer's Warranty

This Revco Habitat CO2 Water Jacketed Incubator Model no. RCO3500TWBB was removed from a univer (more)sity lab where it was surplus to requirements. The unit has been fully tested and recertified by a qualified service engineer. The report is available on request if you would like to see it. The unit has a water jacket that will require a top-up on installation. The unit will require 8-10 hours to stabilise once installed. It is in excellent cosmetic condition with some minor marks from use. 4 Shelves - 49.5 x 49.5cm Internal dimensions - D52 W50 H55cm

Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS System with Peak Scientific Nitrogen Generator Thi (more)s system was removed from a university lab where it was surplus to requirements. The system is in very good cosmetic condition. It powered on, with the 3200 Q Trap and nitrogen generator functioning as expected. The Varian vacuum pump is also in good working order, no further testing was carried out. The previous client stated that this system was in full working order prior to removal. The system comprises: - Applied Biosystems MDS SCIEX 3200 Q TRAP LC/MS/MS - Assembly No.: 1007440 - Serial No.: AF012360607 - Peak Scientific Instruments Nitrogen Generator - Model No.: NM20ZA - Serial No.: J06-06-06 - Running hours: 13,096 - Varian DS602 Vacuum Pump - Model: 949-9335S001 - Serial No.: 238954 - Fitted with oil mist filter EMF20 Code A46229000 - 2 x Sciex power supply units (Assembly No. 014179, Serial Nos. 15470210, 120985175) - 2 x Honeywell 9" black and white monitors (Model HMM9, Serial Nos. H321000214, H321000065) - Lenovo MS PRO PC - Type 2561 - Serial No.: ES10392192 - Loaded with Applied Biosystems Analyst v1.4.2, National Instruments Measurement & Automation Explorer v4.2.1, Chromeleon 6.8, and 3200 QTrap software - Dell Monitor - Serial No.: CN-OUW191-71618-812-ALAB - Lenovo wireless keyboard and mouse - Serial No.: 201209008012 Included Manuals: - 3200 QTRAP Tuning, Calibrating, and Optimising Guide - Analyst Software Tutorial - API Safety Practice Manual Additional accessories: - 1 x MonoSpray II assembly (Part No. 1014666, Serial No. 010158072606) - 4 x brackets (Part No. 016159A) - 4 x 16mm plastic tubing Y-connectors (Part No. 419-7271) - 60 x swabs (approx) - 8 x mixed packets of small O-rings and micro bore tube end connectors - 5 x Pico Tip Emitters (Stock No. FS150-20-10-D-S) - 1 x SGE Analytical 500nl syringe - 1 x Pressure Sensor MPL-503 - 7 x Pico Tips (Nos. 027459, 025388, 025388, 025392 [x4]) - 3 x plastic hose coils for nitrogen - 1 x 10-litre Nalgene bottle with 3-port top - 1 x 5-litre Nalgene bottle with SVC pressure valve (Part No. LVA30-03F-C4)