Memmert IN450 Natural Convection Incubator 449L, 115V

Thermo Scientific HERACELL 150i GP Co2 incubator / oven In excellent condition, only used 6 months.  (more)Thermo reference: 51032719 Years of manufacture: 2021 Forced convection Volume: 151 liters Stainless steel chamber iCAN touch screen Patented humidification system without water tray for rapid return to set points Temperature regulation range. : TA+3 at 55°C Constant humidity: 95% ± 3 Hr CO2 regulation range: 0 to 20% Heat emission at 37°C: 0.06 kWh/h CE certification 230 V, 50/60 Hz Ext. sun. (L x H x D) mm: 637 x 867 x 782 Sun Int. (L x H x D) mm: 470 x 607 x 530 Weight: 70 kg Supplied complete with: 1 CO2 thermal conductivity (CT) sensor 1 water level sensor 3 stainless steel shelves 423 x 465 mm 1 42 mm cable passage 1 interior glass door with closure Tested at 37°C CO2 at 5% Year of manufacture: 2021

LABORATORY INCUBATORS CLW SMART POL-EKO CLW - FORCED AIR CONVECTION CLW Series incubators maintain a (more) constant temperature from 5°C above room temperature to a maximum of 100°C. The CLW models are available from 15 to 1005 liters with latest generation control, quality materials and first-in-class performances. Large touch display, programming, alarms, lock, stainless steel interior are just a small part of what you will find below! Continue reading, you will be surprised! ABSOLUTE CONTROL The SMART control panel is among the most complete you can find on the market. Large symbols and temperature values ​​guarantee comfortable and clear reading, combined with disarming ease of use. The latest generation touch screen responds to commands even if touched with latex gloves and is equipped with a large display: all values ​​are perfectly readable from any angle, regardless of the intensity of the light. DO YOU KNOW THE ADVANTAGES OF AN ADVANCED CONTROLLER LIKE THE SMART PANEL? - Sharp 4.3' color touch screen - Quick and easy data transfer: via LAN or USB - Fast, multi-segment, time and temperature programming - Visual and audible alarms with colored bar on display - Internal memory for programs and data storage - User manual downloadable directly from the controller - Loop function up to 255 times or infinite - Controls can be managed even when wearing latex gloves - Recording of the minimum, average and maximum temperature value for each segment - Overview of the set and current parameters during operation - Operation in temperature or time priority mode - ... and much more More and more? POL-EKO has already thought about it. For those who want cutting-edge functions and the freedom of transfer and remote use, POL-EKO offers you the SMART PRO controller. You can find all the differences between the SMART and SMART PRO panel in our dedicated post: insights on SMART and SMART PRO. With the SMART PRO versions, more accessories and options will also be available. QUALITY FIRST Resistant. Durable. POL-EKO incubators are designed and built to guarantee the best performance. They are a smart purchase, for customers who want to invest in the future of their laboratory. By choosing these products you will have precise results for years and years, repeatable and in complete comfort. The CLW SMART series incubators are built with the best materials and equipped with the most important accessories, to give you a complete and ready-to-use standard product. - Double door: solid external; glass interior - Powder coated sheet metal structure (graphite front panel) - Interior in acid-resistant stainless steel according to DIN 1.4301 - Insulated door with lock - Protection class 2.0 - Protection class 3.1 (DIN 12880) as option → - Stainless steel shelves - USB port for downloading recording data, events, manuals, service - LAN port - Open door alarm - Access port for external sensor - Rear air-flap - Quality control protocol (at +37°C) CLW SMART SERIES The nine models of the CLW series cover most of your needs: from mini stoves to the 1005 liter internal volume model. DETAILS AND ACCESSORIES Every detail of your POL-EKO models is designed to make routine work as simple and comfortable as possible. Below, the front and rear view. 1 - Rating plate 2 - Access port ø30mm for external sensor 3 - Internal glass door (for CL models) 4 - Adjustable feet 5 - Shelf 6 - External solid door 7 - Temperature sensors 8 - Open door sensor 9 - Touch control panel 10 - USB port 11 - Handle with key lock 1 - Main switch 2 - Connector for connecting a hose with nitrogen (only for SLWN models) 3 - Air-flap 4 - LAN port 5 - Fuse 6 - Main power socket C20 OPTIONS POL-EKO allows you to increase the possibilities of your incubator with quality accessories; to better adapt to particular applications or to equip the instrument with safety systems and advanced connections. - Stainless steel shelf - Perforated shelf - Stainless steel basins - LabDesk software - IQ OQ PQ calibration and qualification - Overtemperature protection class 3.1 according to DIN 12880 - Backup battery for the display in case of power failure - Clean contact - LAN cable - Non-standard 20mm access door - Additional 30 mm access door

Carry out high-volume culturing with a high-level of contamination control with these stackable Ther (more)mo Scientific Forma Steri-Cult CO2 Incubators. This incubator combines the most advanced components available into a single incubator: CO2 sensor, precise microprocessor controls, active humidity control, HEPA air filtration and high-temperature decontamination capability.

PHCBI Cooled Incubator Type - MIR-154 Lab This item was removed from a university where it was surpl (more)us to requirement. The unit powers up and is in good working order (thermometer not included). It is in very good cosmetic condition internally and externally. This item requires a Passcode to operate which is available on request.

PHCBI CO2 Incubator Model MCO-170AICD-PE With Shelving And Tray Lab This item was removed from a uni (more)versity where it was surplus to requirement. The unit powers up and is in good working order (thermometer not included).It has been professionally serviced, the report is available on request. It is in very good cosmetic condition internally and externally. This item includes the following: 2 x Shelves: 47 x 45 cm

Memmert IPP260ecoplus Peltier-Cooled Forced Circulation Incubator 256L, 115V Setting Temperature Ran (more)ge Ambient 0°C to 70°C Convection Type Peltier Fan Forced Circulation Chamber Volume 256 L (9 cu.ft.) Features - 256 L volume capacity with precise temperature control - Working temperature range from 0°C (at least 20°C below ambient) to +70°C - Energy-saving Peltier heating/cooling system with individually controlled upper and lower elements - ControlCOCKPIT with TwinDISPLAY and adaptive multifunctional digital PID-microprocessor controller - Process timing starts only when the set temperature is reached with the SetpointWAIT function - Three freely selectable temperature calibration points for accurate control - Over- and undertemperature monitor with AutoSAFETY protection for enhanced safety - Durable stainless steel interior and textured stainless steel exterior for corrosion resistance and easy cleaning The Memmert IPP260ecoplus Peltier-Cooled Forced Circulation Incubator 256L, 115V is a high-capacity, energy-efficient solution for precision temperature control in laboratory environments. With a substantial 256-liter volume and a working temperature range from 0°C (at least 20°C below ambient) to +70°C, it is ideal for handling large sample loads and diverse incubation requirements. The incubator features an advanced Peltier heating and cooling system with individually controlled upper and lower elements, ensuring even temperature distribution. Its intuitive ControlCOCKPIT, equipped with TwinDISPLAY and adaptive PID-microprocessor controller, provides effortless control over temperature and other settings, while the SetpointWAIT function enhances accuracy by initiating process timing only once the desired temperature is reached. Safety and durability are central to the IPP260ecoplus. The AutoSAFETY system includes over- and undertemperature protection with visual and acoustic alarms, automatically adjusting to the setpoint tolerance range to protect samples. The incubator’s stainless steel interior and textured exterior are designed for long-term corrosion resistance and easy maintenance. With nine adjustable shelves and a maximum chamber load capacity of 661 lbs, it supports extensive sample storage, making it a reliable and versatile addition to any laboratory focused on precision and safety.. INCLUDED: The Memmert IPP260ecoplus Peltier-Cooled Forced Circulation Incubator 256L, 115V includes: - 2 Stainless Steel Grids - Tilt Protection Wall Bracket - Calibration Certificate - Power Cord - Operator's Manual - Manufacturer's Documentation - 3 Year Manufacturer's Warranty

Grundfos CRI 1 Vertical Pump Type - A-CA-I-V-HQQV Model - A96532497P20639 This was removed from a un (more)iversity lab where it was surplus to requirements. The unit powers up and draws suction but has not been tested further. It is in reasonably good cosmetic condition, with some marks from use.

Ohaus MB92 Moisture Analyzer Maximum Capacity 90 g Readability Moisture Content 1 mg / 0.01% Recomme (more)nded Moisture Content 0.5 % to 100 % Features - 90g capacity with 1 mg/0.01% readability for precise measurements - Carbon fiber heating for rapid and even heat distribution - 4.3” capacitive touch screen with full-color display for easy navigation - Drying profiles include Ramp, Standard, Step, and Fast for flexibility - ID management supports Sample Name, Sample ID, and Batch ID - Temperature range of 40°C to 200°C for various testing needs - Multi-color status light provides at-a-glance progress updates - Shut-off options include Timed, Manual, Auto, and custom settings - Live drying curve and on-screen instructions for real-time monitoring - Stores up to 200 results and 20 methods for high-throughput use - Durable PBT housing with tool-free cleaning for easy maintenance Robust and durable with the new carbon heating technology and an upgraded full color capacitive touchscreen. Flexible drying profiles, and methods provide versatile method creation, with enhanced password protection ensures data security. The full glass panel and tool-free heating chamber make cleaning easy, ideal for both laboratory and production floor use. The Ohaus MB92 Moisture Analyzer combines precision and versatility for demanding moisture analysis applications. With a maximum capacity of 90g and readability of 1 mg/0.01%, the MB92 ensures accurate measurements across a moisture content range of 0.5% to 100%. Its advanced carbon fiber heating technology delivers rapid and consistent heat distribution, while the full-color 4.3” capacitive touchscreen offers intuitive navigation and control. Designed for flexibility, the MB92 features four drying profiles (Ramp, Standard, Step, Fast) and multiple shut-off criteria, including Timed, Manual, Auto, and custom settings. Enhanced ID management supports Sample Name, Sample ID, and Batch ID, enabling efficient sample tracking. Additionally, the device’s durable PBT housing and tool-free heating chamber assembly make maintenance straightforward. Capable of storing up to 200 results and 20 methods, the MB92 is ideal for high-throughput environments that demand robust performance and easy operation. INCLUDED: The Ohaus MB92 Moisture Analyzer includes: - 3.5 in. Pan - In-Use Cover - Box, Aluminum Sample Pans - Pan Holder - Pan Handle - 5 Glass Fiber Pads - Power Cord - Operator's Guide - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

Labconco CentriVap DNA RotorForuse with Labconco CentriVap Systems INCLUDED: The Labconco 7462900  (more)CentriVap DNA Rotor includes: - Manufacturer's Documentation - 1 Year Manufacturer's Warranty

IKA DB 3.1 Test Tube Combination Dry Block (6 mm/ 12/13 mm / 25 mm)