Ta Instruments TGA Q500 Thermogravimetric Analyzer with TGA Heat Exchanger

Photometer for ammonia (NH3-N), with carrying case HANNA HI97700C New equipment in its original pack (more)aging This portable photometer are designed with an innovative optical system that offer superior performance in accuracy, repeatability, and the amount of time that it takes to do a measurement. The scale : 0.00 to 3.00 mg/L (ppm) NH3-N Resolution : 0.01 mg/L (ppm) Accuracy : ±0.04 mg/L ±4% of measured value Light source : Tungsten lamp Light source : silicon photocell @ 420nm Cuvette type : round, diameter 24.6mm Auto Off : after 15 minutes of non-use Environment : 0 to 50°C (32 to 122°F); RH max 100% The battery : 3 x 1.5V batteries Size : 142.5 x 102.5 x 50.5 mm Mass : 380 g Reagent expiration : 11/2022

BOD Sensor is an extremely reliable innovative solution for the determination of BOD, without the us (more)e of mercury. Easy to use, fast and simple. It screws directly onto the bottle containing the sample and a pressure transducer microprocessor transfers the BOD value directly to the display (in mg / l) and automatically stored in the BOD sensor (5 measurements at 24 hour intervals, offering the possibility of making the analysis even during the weekend). The BOD value can also be obtained directly from the display at any time, even after five days. Measurement is available on 4 different scales - 90ppm, 250, 600 and 999 BOD. For higher values, the measurement can be measured by diluting the sample. The BOD Sensor System 6 is a complete package for analyzing 6 samples simultaneously, consisting of a 6-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption caps and magnetic stir bars. The BOD Sensor System 10 is a complete package for analyzing 10 samples simultaneously, consisting of a 10-position stirring base, BOD sensors, dark glass bottles, carbon dioxide absorption undercaps and magnetic stir bars. The stirring base has been designed to meet the user's needs, it is comfortable, guarantees a high quality stirring and the small footprint allows to accommodate up to 5 bases of 6 positions (30 samples) or 3 of 10 positions ( 30 samples) in a VELP incubator (FOC 200E). Determine the BOD value in 5 steps! To better analyze the BOD values ​​with the innovative VELP Scientifica systems, based on the respirometric technique, capable of providing highly reliable results, just 5 easy and simple steps are enough: 1. Add the magnetic stir bar to the dark glass bottle, add the sample and place the CO2 trap filled with the necessary reagents 2. Incubate everything 3. Screw in the sensor 4. Monitor the activity of microorganisms 5. Read the BOD value (ppm or mg / l), based on the change in pressure inside the bottle due to the activity of microorganisms Technical features: Sensor display: 3-digit LED display Bod measurement: mg/l (ppm) directly on the display BOD scales: 90, 250, 600, 999, 4000 ppm, Higher values after dilution Bottle volumes:  500 ml Data storage: BOD values at 24h intervals Sensor construction material: Technopolymer Power: BOD Sensor System 6 2 W; BOD Sensor System 10 2 W Sensor battery type: CR 2430 Power supply: BOD Sensor System 6 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz BOD Sensor System 10 Sensors: 2x3V lithium batteries Stirring Station: 230V / 50-60Hz or 115V / 60Hz

Dionex IC25 Ion Chromatograph This was removed from a university lab where it was surplus to require (more)ments. The unit has been professionally serviced and is in good working order. It is in good cosmetic condition with minor marks from use.

Randox RX Monza Clinical Chemical Analyser Lab This item was removed from a university where it was  (more)surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility.

SARTORIUS QS4000 Precision Balance 4000g / 0.2g Laboratory Balance QS 4000 Weighing capacity: 4000g  (more)(4kg) Readability: 0.1 g Linearity: ± 0.1 g Weighing pan dimensions: 26 x 21 cm Tested at 1g / 1kg / 4kg In good condition

HR070-CMT 0.70X High Resolution C-Mount Adapter with Z clamp ZEISS Diganostic Instruments For Micros (more)cope The ZN Clamp is compatible with the following Zeiss microscope models: Axiophot Zxioplan Axioskop

This Randox RX Monza Automated Biochemistry Analyser was removed from a university lab where it was  (more)surplus to requirements The lab informed us that it was in full working order and had seen very little use. It has been powered up at our facility and is in excellent cosmetic condition. Accessories included:-Operator ManualInstructional DVDLamp (M925-002)RS232 Cable (M701-705)Cell Clean (M800-082)Thermal Paper Roll (M200-170)Waste Tube (M600-226)Small black part (M100-946) Please note that we have multiples of this unit in stock. You may not receive the one in the photos but will receive one in near-identical working and cosmetic condition. If you would like to see photos of the exact unit you are receiving upon purchase before it is shipped, we would be happy to provide this.

VAT Diaphragm Manual Vacuum Gate Valve This was removed from a university lab where it was surplus  (more)to requirements. The valve opens and closes as it should and the seal is still present It is in good cosmetic condition.

E1 class mass standards are characterized by the highest precision in terms of mass. The allowable d (more)eviation from the actual weight is minimal, making standards of this class ideal for applications where every milligram matters. Product Features: Varied Standards: The set consists of 12 wire standards and 17 cylindrical standards, providing a wide range of calibration options. High-Quality Accessories: The set also includes 2 brushes, 2 tweezers and gloves, facilitating precise and safe cleaning and handling of the standards. Elegant Packaging: The standards are delivered in an elegant wooden box, ensuring their safe storage and transportation. *The mg unit mass standards are wires.

The HX7.4N H scale is a device controlled by means of the PUE HX7 indicator, and it has been equippe (more)d with a 4-load-cell ramp platform made of stainless steel, AISI 304. This robust design facilitates weighing of heavy loads in humid environment. The ramps enable easy loading and unloading. Indicator with a colour 7” graphic display and a diode bar graph allow to observe visualisation of a current load mass presented in relation to the scale range or declared minimum and maximum thresholds. This makes the operation significantly easier. At the back of the housing there are hermetic connectors of RS232, RS485, USB and Ethernet communication interfaces, plus digital inputs/outputs and analogue output. This enables cooperation with external devices such as barcode scanners, printers, external displays, control buttons, light signalling towers, other controlling/signalling devices, systems for automatic process control and superior IT systems. With use of the bracket you can either place the indicator at any flat horizontal surface, or fix it to the wall adjusting the tilt respectively to suit your needs. The terminal's software allows carrying out processes such as weighing, parts counting, dosing, labelling, formulations and percent weighing. Indicator’s system of information is based on databases (users, products, weighings, packaging, formulations, customers) and ALIBI memory which guarantees stored data safety. Since the scale is equipped with a platform lifting system, you are kindly requested to order a transport box (OSB box for the platform) for it. The transport box is necessary for the safe and efficient transport and storage of the ramp scale with the platform lifting system. Please take this item into consideration when planning and placing your order. If you have any questions, the Customer Service Department will be happy to assist you.