Legal metrology printer YDP20-0CE - Sartorius

Manufacturer: Mettler Toledo Model: BT-P42 T 2108 Analytical Precision Microbalance Printer P/N: 0 (more)0600133 S/N: 1126311716 Inspection due 2019 Description: The BT-P42 is a rugged and simple to operate dot matrix printer for Mettler Toledo balances with an a wireless Bluetooth interface. The printout on normal paper fulfills the requirements of modern quality assurance systems (GLP, GMP, ISO 9001, etc.). These define, among other things, the principles and duties for the user of measuring instruments or inspection, measuring and test equipment. The BT-P42 complies with the principle of traceability of measurements by precisely documenting the origin of data, as well as calibration procedures. It fulfills the obligation to archive measurement results by its thermally stable and lightfast print. On connection to Mettler Toledo balances, the BT-P42 prints all data sent by the balance without restriction, that is not only weight values and calibration procedures, but also the results of all applications, built into the balance. Specifications: - Printing unit: Dot matrix printer 5x9 dots, 24-character line length, Epson IBM character table No. 4- Printing speed: 1 line per second- Ribbon cartridge: Exchangeable, black- Paper roll: Normal paper, 58 x dia. 51 mm, integrated in housing, commercial size- Printer functions: Printing, lightfast and thermally stable (GLP, GMP, ISO 9001), line feed, self-test- Data transmission: Wireless Bluetooth® technology; Max. range of 10 m- Power line voltage, frequency: 230 V, admissible fluctuations –20% +15%, 50/60 Hz- Power consumption: 70 mA- Installation category: II- Pollution degree: 2- Dimensions / Weight (W x D x H): 157 x 210 x 85 mm / net 1.5 kg (incl. paper roll) Items delivered: - Mettler Toledo BT-P42 T 2108 Analytical Precision Microbalance Printer - Instruction Manual as PDF via E-Mail Condition: The printer is in very good cosmetic as well as technical condition, being 100% functional tested. It is ready to be applied.

Legal metrology printer YDP20-0CE - Sartorius For Sartorius scale Dimensions: 215x155x78mm Weight: 1 (more)kg With new ink ribbon

Thermal transfer printer for Mettler Toledo equipment. Communication via DB25.

Print resolution: 203 dots/inch, 8 dots/mm – 300 dots/inch, 12 dots/mm or 600 dots/inch, 24 dots/mm  (more)Dot size (WxL): 203 dpi – 0.125 x 0.125 mm, 300 dpi – 0.084 x 0.099 mm, 600 dpi – 0.042 x 0.042 mm Maximum print width: 203 dpi – 104 mm Bar code modulus: 203 dpi – 4.9 mil to 49 mil, 300 dpi – 3.3 mil to 33 mil, 600 dpi – 1.6 mil to 16 mil Programmable constant print speeds: 203 dpi – 61, 76 through 254 mm/s in 25 mm increments, 300 dpi – 61, 76 through 203 mm/s in 25 mm increments, 600 dpi – 38, 51 through 102 mm/s in 25 mm increments Media label length: Minimum – 13 mm, Maximum 203/300 dpi – 991 mm, Maximum 600 dpi- 508 mm Media label width: Minimum – 25.4 mm, Maximum tear/cutter – 114 mm, Maximum peel/rewind – 108 mm Media total thickness (including liner, if any): Minimum – 0.058 mm, Maximum – 0.25 mm Media maximum roll outer diameter: 76 mm core – 203 mm Media inter label gap: Minimum – 2 mm, Preferred – 3 mm, Maximum – 4 mm Media ticket/tag notch size (WxL): 6 x 3 mm Media hole diameter: 3 mm Media notch or hole position (centered from inner media edge): Minimum – 3.8 mm, Maximum – 57 mm Media black mark density: > 1.0 ODU Media maximum density: ≤ 0.5 ODU Ribbon width: Minimum – 51 mm, Maximum – 110 mm Ribbon standard lengths: 2:1 media to ribbon roll ratio – 300 m, 3:1 media to ribbon roll ratio – 450 m Ribbon core inside diameter: 25.4 mm Dimensions (HxWxD): 338 x 278 x 475 mm Weight: 15 kg

This Canon Microprinter 90 Microfiche Microfilm Reader and Printer was removed from a university lab (more) where it was surplus to requirements. This item is in good cosmetic condition and powers up, but we are unable to test it further at our facility.

3D Systems Monochrome ProJet 360 3D Printer Floor Standing w/ Consumables Lab This item was removed  (more)from a university where it was surplus to requirement. It is in good cosmetic condition and powers on. The previous client has stated it was fully functional when last used. The table shown in the second image is not included. Also included: - 2 x 1 litre Visijet PXL Clear order No. 360434 - 1 x 7kg tub of ZP131 printing media powder - 1 x Litre 3D Systems ZB 60 clear binder solution - 1 x Data lead - 1 x Small grease gun - 1 x 49g tube of multi-purpose grease - 1 x 59ml bottle of 3D systems cleaning solution Part 360 444 - 5 x Small cleaning brushes - 2 x Hand scrapers

This ZEISS AxioLab 5 Teaching Head was removed from a university lab where it was surplus to require (more)ments. This item is in very good cosmetic condition. Objectives included: 2 x Carl Zeiss W-PI 10x/23

Pharmacia Biotech Chromatography Column XK 16/100 This was removed from a university lab where it wa (more)s surplus to requirements. The unit is in good cosmetic condition but looks like it has been used.

This Sorvall SLA-3000 Super-Lite Centrifuge Fixed Angle Rotor 6 x 500ml 1200rpm + Lid was removed fr (more)om a university lab where it was surplus to requirements. The unit is in good cosmetic condition but has not been tested. It will need to be inspected for safety by a qualified engineer before it can be used. Compatible with Thermo Scientific Sorval Evolution RC Series and RC-6 Series centrifuges including RC-5, RC-5B, RC-5B Plus, RC-5C Plus, and RC-26.

Ramp scales with stainless steel load cells is widely applied in meat, fish, pharmaceutical, cosmeti (more)c and chemical industry. The H315/4N series is manufactured in complete stainless steel technology with stainless steel indicator PUE H315 series installed on a long cable. Ramp scales is manufactured from OH18N9 stainless steel with IP 68. On special order, it is possible to manufacture ramp scales in upgraded anti-corrosion stainless steel version. Scales is available in dual range version on surcharge.

If you buy a WPY Multifunctional Scale by July 31, 2024, you will receive each of these products alo (more)ng with a FREE lifetime license for the Workflow Module. Multifunctional scales WPY series is designed for fast and precise determining mass of weighed objects in industrial conditions and with application of a modern terminal PUE7 series. Application The device features simple structure and enables maximum automation of carried out weighing processes. Apart from standard weighing mode, the WPY series additionally allows for parts counting, labelling and formula making processes. The universal software implemented in the terminal enables scales cooperation with barcode scanners, receipt printers, label printers, RFID scanners and PC peripherals (including mouse, keyboard and external data storage devices) all connectable to built-in interfaces RS232, USB and Ethernet. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. The multifunctional WPY scales if connected to a label printer enables printing labels for matching goods weighed in industrial conditions. The labelling system based on the labelling scales WPY series is dedicated to printing labels for matching weighed products in a packaging process. Design and functionality The WPY series features a stainless steel weighing platform and a terminal comprising both, 5,7” TFT colourful touch screen display and a membrane keyboard. The system is ready to connect an additional weighing platform, and provides below functions: programming of display and functional keys, programming of infrared proximity sensors, designing printouts, designing text data that is displayed on terminal display. The Workflow Module will improve work in your company. It enables developing a path of customized weighing process adapted to individual requirements of a particular production system, and next sending it to all weighing instruments cooperating with the E2R. The given process is started on the weighing instrument upon operator logging or after selecting a product, a formulation or an ingredient to which it is assigned. Modifications are made with use of convenient and intuitive interface. Software functionality: available working modes: weighing, parts counting, percent setup, formulation, density determination, animal weighing; generating standard labels for matching single goods; generating C labels for matching cumulative containers; generating CC labels for matching containers with cumulative containers; three means of triggering a C and CC label printout: - manually, - by counter status, - by set mass value of a product; control scales mode (+/- control of measurement result); product identification using EAN-13 and EAN-128 codes; access to databases of operators, products, raw materials, clients, weighing records, universal variables and tares. The multifunctional WPY series enables quick searching of a product by means of a connected barcode scanner. This option considerably increases functionality of the system. The terminal enables cooperation with a computer software "LABEL EDITOR", and the software communicates with the scales either through RS 232 interface or through ETHERNET. Scale WPY series is available in dual range (non-verified) version on surchage. Dual and single range scales in non-verified version are named as: scale model/NL, e.g. WPY 150/C2/R/NL.