Klotz PCSS Laser Particle Counter Partikelzähler 0,3-10µm (0,5-5,0µm) ext. Probe

Climet CI-1054 100 LPM Particle Counter Lab This item was removed from a university where it was sur (more)plus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item also includes the following: Climet CI-S51 100 LPMKingston USB Porous media corporation Filter

Climet CI-1054 100 LPM Particle Counter Lab This item was removed from a university where it was sur (more)plus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item also includes the following: Climet CI-S51 100 LPMKingston USB Porous media corporation Filter

This was removed form a university lab where it was surplus to requirements. The unit powers up but  (more)has not been tested further. It is in reasonable cosmetic condition but has rust and marks from use.

This item has just arrived in our stock. Please enquire for further details.

The HORIZON system from Halo Labs employs Backgrounded Membrane Imaging (BMI) technology to measure  (more)and characterize subvisible particles in a high-throughput, low volume format. BMI has its roots in membrane microscopy – a USP lot release method that images particles on a membrane surface. The fully automated, fluidics-free HORIZON system utilizes disposable membrane plates and automated image processing to rapidly generate reliable and accurate particle counts and sizing. It can perform particle characterization in up to 96 samples in a single run using as little as 25 µL per sample. BMI is also insensitive to solution refractive index, enabling reliable measurement of translucent protein aggregates. The HORIZON system uses sophisticated imageprocessing techniques to analyze images and acquire particle data. The key is to first take a background image of the membrane. After samples are filtered through by vacuum and the particles are captured, the same membrane is re-imaged with sample particles on the surface. The sample image is precisely aligned with the background image and then processed pixel by pixel so that the background texture is eliminated, and particles are viewed in high contrast. Backgrounding the image leads to high reproducibility and minimal interference from membrane texture and imperfections.

The FACSCanto II system is an easy-to-use benchtop analyzer that delivers proven performance, accura (more)cy, and high-quality results. The FACSCanto II can be configured with two or three lasers to detect up to eight colors. It features many innovations, including a true fixed alignment flow cell to minimize startup time and improve  reproducibility. The optical system maximizes signal detection and increases sensitivity and resolution for each color in a multicolor assay. These and other capabilities make the BD FACSCanto II ideal for today’s busy clinical lab, providing a high degree of automation and quality control. With optimal reproducibility, the FACSCanto II system reduces hands-on technician time and costs associated with repeat testing. Lasers: 405-nm solid state diode, 30-mW fiber power output 488-nm solid state, 20-mW laser output 633-nm HeNe, 17-mW laser output Laser Configuration: Spatially separated beams with 9 x 65- μm elliptical spots Optical Alignment Procedure: Fixed, no operator alignment required Flow Cell: 180 x 430-μm rectangular quartz flow cell Collection Optics: Optical-gel coupled 1.2 NA lens FSC Resolution: 1.0 μm SSC Resolution: 0.5 μm Fluorescence Detector Design: Reflective optics with single transmission filter in front of each PMT FSC Detector: Photodiode with 488/10 BP SSC Detector: PMT with 488/10 BP Fluorescence Detectors: 8 PMTs in 4-2-2 configuration Violet Laser Dyes: Pacific Blue, AmCyan (455, 488 nm) Blue Laser Dyes: FITC, PE, PerCP or PerCP-Cy 5.5, PE-Cy 7 (525, 575, 678 or 695, 785 nm) Red Laser Dyes: APC, APC-Cy7 (660, 785 nm) Detector Bands: Violet Laser: 450/50; 502 to 525 nm Blue Laser: 530/30; 585/42; >670; 780/60 nm Red Laser: 660/20; 780/60 nm Fluorescence Threshold Sensitivities: FITC <100 MESF; PE <50 MESF Max Particle Size: 50 μm Sample Flow Rate: 10 μL/min to 120 μL/min Sample Acquisition Rate: 10,000 events/second, 6 compensated fluorescence parameters and 2 scatter parameters Sample Dead Volume: 30 μL (BD Falcon tubes 12 x 75-mm) Dimensions (DxWxH): Cytometer: 610 x 910 x 640 mm Fluidics cart: 610 x 790 x 640 mm Weight: Cytometer: 145 kg Fluidics cart: 51 kg

Branson M3800H Mechanical Heated Ultrasonic CleanerFeatures - Sweep frequency eliminates standing wa (more)ves and creates consistent cavitation throughout the tank - 40 kHz rugged industrial transducers - Mechanical control located above and behind the cleaning tank in an easily accessible control tower panel and raised to avoid damage from cleaning solutions - Convenient built-in pour drains are featured on 0.5 and 0.75 gallon models, with tank drain valves incorporated on models 1.5 gallons and larger - Plastic body, chemical-resistant Easy to use mechanical timer for setting up to 60 minutes of operation, continous operation, as well as heating at 69°C/156.2°F Completely removes flux and contaminants from precision parts such as PC boards, SMDs, quartz crystals, capacitors, and many others Can also be used in laboratory applications for cell separation, cell lysing, mixing, emulsifying, sample preparation, and degassing of liquids Bransonic M and MH Series cleaners are known for offering a level of precision and reliability you have come to expect from Branson. M Series includes 60-minute mechanical timer and continuous operation. MH Series includes 60-minute mechanical timer and continuous operation with heating capability. M and MH Series cleaners offer the following features:Constant activity/power tracking automatically maintains the ultrasonic power by adjusting for changes in liquid level and temperature caused by a light or heavy load. This helps ensure more uniform cleaning and consistent performance, even with multiple users or when bath conditions change.Click Here to View Product Video INCLUDED: The Branson M3800H Mechanical Heated Ultrasonic Cleaner includes: - Tank Cover - Power Cord - Operator's Manual - 1 Year Manufacturer's Warranty

Hermle Rectangular bucket for Z496-1000-AC 2/pk The Hermle Rectangular bucket for Z496-1000-AC comes (more) in a pack of two and is designed to work with the Hermle Z496-1000 and Z496-100-AC rotors. The bucket can hold up to 750ml of sample volume and can handle a maximum speed of 4,200 RPM, as well as a maximum relative centrifugal force (RCF) of 3,964 x g. The rectangular shape of the bucket ensures efficient use of space, allowing for higher sample capacity per run. This bucket is made of durable materials and can withstand high speeds and centrifugal forces, making it a reliable and long-lasting accessory for a variety of centrifugation applications in research and clinical laboratories. INCLUDED: The Hermle Rectangular bucket for Z496-1000-AC 2/pk includes: - Manufacturer's Documentation - 2 Year Manufacturer's Warranty

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Maximum temperature: 150°C Temperature stability (at 37°C): ±0.005°C Temperature uniformity (at 37°C (more)): ±0.02°C Maximum pump pressure (at zero flow): 310 mbar Maximum pump flow (at zero pressure): 17 l/min Internal dimensions (LxWxD): 325 x 300 x 150 mm Capacity: 12 L Liquid depth min/max: 80/140 mm

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Measurement with application of 4 load cells is a guarantee of precise mass reading, regardless of l (more)oad positioning on weighing platform. H315.4 H/Z The platform scales H315.4 H/Z series is fully made of stainless steel profiles with stainless steel weighing platform. The scale features 4 load cells, and it is prepared for mounting as a pit version. The device comes standard with opening weighing platform enabling easy cleaning the area beneath the platform. The H315.4 H/Z series features a stainless steel terminal PUE H315 series with backlit LCD display and function buttons. The terminal is installed on a long cable for easy mounting it on a wall. The scale is powered from mains, RS 232 interface comes standard. Scales is available in dual range version on surcharge. The frame for recessing (foundation) is part of the set &ndash; you will receive it with the ordered scale.