Biotest APC M3 P52100S Airborne Particle Counter and APC Plus 943201

Biotest APC M3 P52100S Airborne Particle Counter and APC Plus 943201 These items were removed from a (more) university where they were surplus to requirement. Both items are in good cosmetic condition and power up, we are unable to test them further at our facility. The following items are included: APC M3Model P52100SSerial No. F0708-010310Year 2008 APC PlusModel 943201Serial No. B0408-2275Year 2008 Boxer Custom CaseSerial No. 13665External 44cm x 52cm x 39cmInternal 39cm x 47cm x 20cm Accessories included:1 x power lead1 x 7-volt power transformer supply lead1 x stainless suction cup with 1 meter hose

BD Becton Dickinson LSR II Flow Cytometer This was removed from a university lab where it was surpl (more)us to requirements. The unit powers up but we were unable to test it further without a PC and software. The lab informed us when it was last used a few years ago, it was still working. The unit is in overall good cosmetic condition with marks from use. There is a crack in the front and the right-hand cover and the left-hand door doesn't close fully. 2 x One ACModel - CBS2120PN - 011-526SN - 0129 - 6308/0129-6304 Becton Dickinson Closed Waste Container Alloy Products Corp 316L Waste Container (Lid doesn't fit)SN - 115443-007 Table not included.

This listing is for the Becton Dickinson FACSCalibur Flow Cytometer. It is being sold as the unit on (more) its own without cables or software, it needs its laser replaced, otherwise it is in full working condition.The Becton Dickinson FACSCalibur Flow Cytometer offers aunique approach to flow cytometry, allowing users to perform both cell analysisand cell sorting in a single system, providing flexibility for a variety ofresearch and clinical applications. The BD FACSCalibur is a fully integratedmultiparameter system that has the performance and sensitivity to ensureobjective and reproducible results through the use of dual-laser technology,interbeam compensation, and an alignment-free optical design. Efficientcollection optics, coupled to the flow cell with an optical gel, permit the useof a low-powered, air-cooled argon laser and a red diode laser to ensure thehigh sensitivity required for analysis of low-density antigens.

The HORIZON system from Halo Labs employs Backgrounded Membrane Imaging (BMI) technology to measure  (more)and characterize subvisible particles in a high-throughput, low volume format. BMI has its roots in membrane microscopy – a USP lot release method that images particles on a membrane surface. The fully automated, fluidics-free HORIZON system utilizes disposable membrane plates and automated image processing to rapidly generate reliable and accurate particle counts and sizing. It can perform particle characterization in up to 96 samples in a single run using as little as 25 µL per sample. BMI is also insensitive to solution refractive index, enabling reliable measurement of translucent protein aggregates. The HORIZON system uses sophisticated imageprocessing techniques to analyze images and acquire particle data. The key is to first take a background image of the membrane. After samples are filtered through by vacuum and the particles are captured, the same membrane is re-imaged with sample particles on the surface. The sample image is precisely aligned with the background image and then processed pixel by pixel so that the background texture is eliminated, and particles are viewed in high contrast. Backgrounding the image leads to high reproducibility and minimal interference from membrane texture and imperfections.

Address the full range of current and future multi-parameter cellular analysis research needs with t (more)he NovoCyte flow  ​cytometer. ACEA brings researchers high performance flow cytometry at a low investment cost with the NovoCyte platform. Lasers: Blue 488 nm, Red 640 nm Detectors: 530, 585, 675 nm Laser Configuration: Spatially separated beams with 10 x 80 μm elliptical spots Optical Alignment Procedure: Fixed, no operator alignment required Flow Cell: 170 x 290 μm rectangular quartz flow cell FSC/SSC Resolution: FSC < 0.5 μm, SSC < 0.2 μm Cell Size: 0.2 – 50 μm Fluorescence Threshold Sensitivity: FITC < 75 MESF, PE < 50 MESF Fluorescence Resolution: < 3% CV for CEN Filters: User Exchangeable Sample Acquisition Rate: 35,000 events/second Volumetric Absolute Count Precision: CV < 5% Sample Flow Rate: 5 – 120 μL/min Sheath Flow Rate: 6.5 mL/min Sample Aspiration Volume: 10 – 100 μL Fluid Container Capacity: 3 L sheath, 3 L waste, 500 mL cleaning, 500 mL decontamination Carryover: < 0.1% Fluidics Maintenance: Automated startup, cleaning, decontamination and shutdown Manual Sample Loading: 12 x 75 mm tube Dimension (WxDxH): 600 x 450 x 390 mm Weight: 39 k

Thermo Scientific Surveyor MSQ Plus Mass Spectrometer System This system was removed from a univers (more)ity where it was surplus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. Includes: HAZMAT-0100045 Calmix Working Solution Bottle Expires : 11/30/2023

Gardner Denver Welch Cold Trap. Cold trap for suction and vacuum lines or Schlenk lines. It reaches  (more)−79 °C by using a mixture of dry ice and isopropanol or liquid nitrogen. Maintains temperature for 12 hours if dry ice/isopropanol is used or 2 hours if liquid nitrogen is used. 2.8 L internal glass. Transparent lid for visual inspection. Easy cleaning. The Gardner Denver Welch cold trap is used to process samples with low eutectic points. The trap is connected in series with a freeze-drying system or vacuum evaporation system and a vacuum pump to prevent contaminants from migrating to the vacuum pump.

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW