Beckman Coulter MoFlo Astrios EQS Flow Cytometer System & Sterilgard Cabinet Lab

2 x Becton-Dickinson Remote Pre Amp - BD Biosciences LSR II Boards These were removed from a univers (more)ity lab where they were surplus to requirements. They are in good cosmetic condition but have not been tested.

Beckman Coulter MoFlo Astrios EQS Flow Cytometer System & Sterilgard Cabinet This was removed f (more)rom a university lab where it was surplus to requirements. The PC with the system cannot run the software. The software is included but will require a Beckman OEM PC system to run. The unit has the following lasers installed: 1 X 640NM - 106MW.1 x 592NM - 200MW.1 X 561NM - 202MW.1 x 532NM - 150MW.1 x 488NM - 200MW.1 X 405NM - 55MW. The writing is quite faint on the MW output, so the above figures might not be 100% correct. The complete system consists of: 1 x Baker Company SG503HE-BC-INT SterilGARD hood.Manufactured 04/13/2015.The unit has been powered up. 1 x Moflo Astrios EQS Main Unit.The unit has various marks and scratches from general use. It powers up fine. 1 x Moflo Astrios Lower/Laser/Computer Section.The laser & computer system power up fine.

Climet CI-1054 100 LPM Particle Counter Lab This item was removed from a university where it was sur (more)plus to requirement. It is in good cosmetic condition and powers on, we are unable to test it further at our facility. This item also includes the following: Climet CI-S51 100 LPMKingston USB Porous media corporation Filter

Met One offers battery-operated portability, up to six size channels and a built-in printerall in on (more)e simple, compact instrument. The Met One 237 counts airborne particles in up to six different size ranges simultaneously. Count data is displayed on the front-panel as total number of particles (cumulative count) or the particles in each size range (differential count). The bright LED display lets you see the data easily and the printout shows cumulative and differential count data for each size range. Channel Sizes: 2 ch; 0.5 µm, 5.0 µm – 4 ch; 0.5 µm, 0.7 µm, 1.0 µm, 5.0 µm – 5 ch; 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 5.0 µm – 6 ch; 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 3.0 µm, 5.0 µm Flow Rate: 0.1 CFM (2.83 LPM) Coincidence Limit: 2 million/ft3 Light Source: Laser diode Data Storage: 500 samples, rotating buffer Sample and Hold Times: 1 second to 24 hours Count Alarms: 1 to 9,999,999, counts each channel Count Modes: Manual, auto, concentration, beep Concentration Mode: 1 second samples, 1 to 10 samples averaged, display updated every second; displays counts/ft3, liter or counts/1000L (m3) Battery Recharge Time: 16 hours (with unit off) Battery Operating Time: 4 hours with printing, 8 hours without printing Dimensions (WxhXD): 170 x 120 x 300 mm Weight: 3.1 kg

Partec Cyflow Space FACS stand alone system with Analytical cuvette. Equipped with: 4 measurable par (more)ameters: FCS, SSC, D3 and D4 bandpass filters (expandable to 9 parameters). Blue diode laser 20 mW 488 nm (expandable to 3 laser light sources). Sorting unit with green laser (sorting cuvette not included, but can be ordered from Sysmex). Fujitsu PC with Flowmax software for flow data analysis. Bottle rack for 1 liter bottles (for e.g. sheat fluids, buffers and waste).

This Jouan B4i Benchtop Centrifuge was removed from a university lab where it was surplus to require (more)ments. The unit powers up and is in good working order. It is in good cosmetic condition with minor marks. This item includes the following rotor: Thermo Jouan High Throughput Swing-Out Rotor Model S40Max Load 2.00kgMax speed 4300 (rpm) This item ran at 4000rpm with S40 Rotor fitted.As stated in the manual, the maximum speed for a swing-out rotor on this unit is 4000 rpm.

Lifting platform Rudolf Grauer Boy 110. Aluminum and stainless steel. Load max. 50 kg Size of platfo (more)rm-12x14 cm Lift style scissor. Control of manual adjustment. Specifications: Height of extension: 14 cm Height folded: 4 cm Ideal for use in fume-hoods fume, the media lab are lifting platforms ultra-stable able to hold a variety of items such as glassware, hot plates, baths and magnetic stirrers. The button adjustment allows height adjustment easy and precise. Constructed of aluminum and stainless steel and with a top plate 12x14 cm, With its system of lift-style scissor, this cat in the laboratory is able to withstand loads of up to approximately 50 kg It is recommended that the cat be lifted as close to the desired height as possible, before the weight is put on it and make final adjustments.

Convenient Transportation of Small Mass Standards The mass standards tweezers are tongs/ pliers that (more) will enable you to conveniently and precisely grasp and transport small mass standards. With it, you can easily and quickly place or lay an object (for example, a mass standard) on the pan and remove it from the pan. The tweezers protect the mass standards from finger grease, moisture and other factors that interfere with the measurement. It is indispensable in the daily use of laboratory balances. Tweezers 105 mm Material: stainless steel with a carbon fiber tip for standards up to 50 g What Kind of Tweezers for Mass Standards? TWEEZERS LENGHT APPLICATION Standard 105 mm up to 50 g 160 mm up to 200 g 250 mm up to 500 g 300 mm up to 500 g Made of carbon fiber 105 mm up to 50 g With a carbon fiber tip 105 mm up to 50 g 155 mm up to 200 g 185 mm up to 200 g 200 mm up to 200 g

The Housing and the Display The housing is made of durable ABS plastic. The terminal has been equipp (more)ed with 5’’ colour display ensuring perfect readability, and 22-key membrane keypad featuring programmable function keys. The terminal offers customized menu, with this all your personal needs can be met which makes operation even more intuitive and simple. Battery as an Optional Power Source Use of the optional battery enables the PUE C32 terminal to operate even when there is either no or unstable power supply. Communication Interfaces Standard terminal has been equipped with RS 232, USB-A, USB-B, 4×IN, 4×OUT and Ethernet interfaces which facilitate both cooperation with peripherals such as printer or computer and data exchange using USB drives. The terminal connects with wireless networks due to a Wireless Connection module, which comes standard. Data Management PUE C32 information system is based on 7 databases, each of different maximum record quantity:: Products - 15 000 Operators - 500 Formulations - 500 Packaging - 500 Customers - 500 Labels - 500 Universal variables – 100 Databases can be imported and exported via USB flash drives. ALIBI Memory ALIBI memory provides data safety and allows saving up to 500 thousand weighing records.This guaranties continuous storing of data over a long period of time.

The Leica DM500 microscope with “plug and play” capability is the ideal tool to make teaching entry- (more)level college and university Life Science courses easy and fun for the instructor and the student. Student-friendly features such as the pre-focused, pre-centered condenser and the EZTube preset diopter, which prevent incorrect adjustments, provide more time for hands-on teaching. EZStore design with integrated handle and cord wrap allows easy carrying, easy lifting and protection against microscope component damage. Head: Binocular Eyepiece: Leica HC PLAN s 10x/20 fixed Objectives: PLAN 4x/0.10, PLAN 10x/0.22, HI-PLAN 40x/0.65 PH2, HI-PLAN 100x/1.30 Oil PH3 Final Magnifications: 40x, 100x, 400x, 1000x Magnification changer: 4 position Focusing: Coaxial focus controls; self-adjusting focus mechanism; 300 micros per fine focus rotation; calibrated in 3 micro increments Illuminator: LED illuminator Camera: Leica ICC50 W Modes: SD mode, USB mode, WiFi mode, Ethernet mode Exposure time: 1 msec – 500 msec Live image: 30 fps (depends on mode and resolution setting) Full frame image acquisition: 5.0 megapixels max.