BD Becton FACSCanto II Flow Cytometer System 3 Laser (L1,L2,L3) + HTS + Dongle

The traditional manual interpretation of blood differential- srequires a high level of concentration (more) which can affect, adversely, the accuracy of the resulting differential count. The Assistent electronic memory counters facilitateaccurate recording of the blood cell differential profile.The microscopic image can be viewed continuously, and the count can be recorded blind.

Met One offers battery-operated portability, up to six size channels and a built-in printerall in on (more)e simple, compact instrument. The Met One 237 counts airborne particles in up to six different size ranges simultaneously. Count data is displayed on the front-panel as total number of particles (cumulative count) or the particles in each size range (differential count). The bright LED display lets you see the data easily and the printout shows cumulative and differential count data for each size range. Channel Sizes: 2 ch; 0.5 µm, 5.0 µm – 4 ch; 0.5 µm, 0.7 µm, 1.0 µm, 5.0 µm – 5 ch; 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 5.0 µm – 6 ch; 0.5 µm, 0.7 µm, 1.0 µm, 2.0 µm, 3.0 µm, 5.0 µm Flow Rate: 0.1 CFM (2.83 LPM) Coincidence Limit: 2 million/ft3 Light Source: Laser diode Data Storage: 500 samples, rotating buffer Sample and Hold Times: 1 second to 24 hours Count Alarms: 1 to 9,999,999, counts each channel Count Modes: Manual, auto, concentration, beep Concentration Mode: 1 second samples, 1 to 10 samples averaged, display updated every second; displays counts/ft3, liter or counts/1000L (m3) Battery Recharge Time: 16 hours (with unit off) Battery Operating Time: 4 hours with printing, 8 hours without printing Dimensions (WxhXD): 170 x 120 x 300 mm Weight: 3.1 kg

The FACSCanto II system is an easy-to-use benchtop analyzer that delivers proven performance, accura (more)cy, and high-quality results. The FACSCanto II can be configured with two or three lasers to detect up to eight colors. It features many innovations, including a true fixed alignment flow cell to minimize startup time and improve  reproducibility. The optical system maximizes signal detection and increases sensitivity and resolution for each color in a multicolor assay. These and other capabilities make the BD FACSCanto II ideal for today’s busy clinical lab, providing a high degree of automation and quality control. With optimal reproducibility, the FACSCanto II system reduces hands-on technician time and costs associated with repeat testing. Lasers: 405-nm solid state diode, 30-mW fiber power output 488-nm solid state, 20-mW laser output 633-nm HeNe, 17-mW laser output Laser Configuration: Spatially separated beams with 9 x 65- μm elliptical spots Optical Alignment Procedure: Fixed, no operator alignment required Flow Cell: 180 x 430-μm rectangular quartz flow cell Collection Optics: Optical-gel coupled 1.2 NA lens FSC Resolution: 1.0 μm SSC Resolution: 0.5 μm Fluorescence Detector Design: Reflective optics with single transmission filter in front of each PMT FSC Detector: Photodiode with 488/10 BP SSC Detector: PMT with 488/10 BP Fluorescence Detectors: 8 PMTs in 4-2-2 configuration Violet Laser Dyes: Pacific Blue, AmCyan (455, 488 nm) Blue Laser Dyes: FITC, PE, PerCP or PerCP-Cy 5.5, PE-Cy 7 (525, 575, 678 or 695, 785 nm) Red Laser Dyes: APC, APC-Cy7 (660, 785 nm) Detector Bands: Violet Laser: 450/50; 502 to 525 nm Blue Laser: 530/30; 585/42; >670; 780/60 nm Red Laser: 660/20; 780/60 nm Fluorescence Threshold Sensitivities: FITC <100 MESF; PE <50 MESF Max Particle Size: 50 μm Sample Flow Rate: 10 μL/min to 120 μL/min Sample Acquisition Rate: 10,000 events/second, 6 compensated fluorescence parameters and 2 scatter parameters Sample Dead Volume: 30 μL (BD Falcon tubes 12 x 75-mm) Dimensions (DxWxH): Cytometer: 610 x 910 x 640 mm Fluidics cart: 610 x 790 x 640 mm Weight: Cytometer: 145 kg Fluidics cart: 51 kg

Chemometec A/S NucleoCounter NC-200 Automated Cell Counter System Lab This system was removed from a (more) university lab where it was surplus to requirement. Both the Chemometec A/S NucleoCounter NC-200 and Laptop are in very good cosmetic condition and powered up, we are unable to test them further at our facility. Please note that this system does not include the software required to operate but the original laptop is included as it may have useful hardware. Nucleocounter C-200Serial No. 9000201112003522 Lenovo Thinkpad T15 laptopWindows 10 operating systemSerial No. PF-2J9PPX Also includes the following: Included:2 x Low-voltage power supplies1 x Data lead

BioMerieux Chemunex Chemscan RDI Advanced Flow Cytometer This was removed from a university lab wher (more)e it was surplus to requirements. The system powers up and is in good cosmetic condition with minor marks from use. There is a joystick and a keypad supplied. There is no PC or software included.

BINDER KB-115 refrigerated incubator / oven with forced convection 100 ° C Model: KB115 refrigerated (more) and ventilated - NEW GENERATION Capacity: 115 liters Temperature range: -5 ° C to 100 ° C Inner glass door Integrated digital temperature display 2 shelves Cable passage: Ø 30 mm (on the right wall) Power supply: 230 V, Frequency: 50-60 Hz, Power: 700 W, Internal dimensions: 60 x 40 x 48 cm Overall dimensions: 83 x 70 x 101 cm Weight: 125 kg Year of manufacture: 2022 Tested at 37 ° C and -2 ° C

The offered instrument / system is fully functional tested and ready to use. FURTHER DETAILS TO FOLL (more)OW

Thermo Scientific Safe 2020 Class 2 Safety Cabinet Type S2020 1.8 + Stand This was removed from a un (more)iversity lab where it was surplus to requirements. The unit powers up and is in full working order. This model is not fitted with a UV light. It is in good cosmetic condition with minor marks from use.

Arctiko SUF 500 -86°C Ultra Low Chest Freezer Temperature Setting -40°C / -86°C Volume 13.0 cu. ft.  (more)(368L) Cooling System Single System / Static Features - Single compressor technology that ensures easy maintenance, lower heat dissipation, and low energy consumption - Newly developed noise reduction technology reduces noise level drastically for a more pleasant work environment - Filter less construction prevents dust from blocking the airflow which reduces the unit’s ability to dissipate heat effectively, minimizing maintenance procedure - Capable of reaching -80°C in only 190 minutes - The user friendly XR30CX controller is standard and includes different alarms such as visual, acoustic, power failure, and more - An insulated inner door is featured for providing better recovery time after door openings and optimal temperature stability - Features a premade access port, making it easier to monitor or inspect the unit with external probes - 100% HCFC &amp; CFC free The Arctiko SUF 500 -86°C Ultra Low Chest Freezer is a high capacity, ultra low temperature chest freezer designed to work in high traffic labs. The single compressor technology ensures a quick pulldown, fast recovery time, and high temperature uniformity throughout the compartment, even with multiple door openings. The SUF 500 is capable of reaching -80°C in only 190 minutes and the single compressor technology is specially designed to reduce the number of mechanical components that generate unnecessary heat and noise. The SUF 500 has optimized internal storage for the best overlook. With the included stackable basket and the optional stainless steel front rack storage system, samples will be easily accessible at any time. This freezer also features a premade access port, making it easier to monitor or inspect the unit with external probes. This freezer also features filter less construction, which makes cleaning unnecessary. The evaporator coils are spaced so far apart that dust will not be trapped and obstruct the airflow. With this unique construction, the dust intake is minimal, which eliminates the need for filters entirely saving on maintenance time and cost. INCLUDED: The Arctiko SUF 500 -86°C Ultra Low Chest Freezer includes: - Key for Door Lock - Stackable Basket - Power Cord - Operator's Manual - 2 Year Manufacturer's Warranty

Do you need a moisture analyzer that not only determines moisture or dry matter content with impress (more)ive accuracy, but also performs a digital audit, responds to your voice commands and sends you light messages? If so, learn about the functionality of the ELLIPSIS series of moisture analyzers: It Dries in 4 Ways The MA 5Y Moisture Analyzer offers you four drying profiles: standard, mild, fast and step. The standard profile is the usually used drying profile. It allows the most accurate determination of moisture content. The mild profile is designed for drying substances that are sensitive to the rapid heat released by the filaments, which heat full power at the initial stage of the process. An example of such a substance is leather. You will use the fast profile for samples with significant moisture content &ndash; of the order of even several tens of percent. The step profile will be ideal for drying substances that contain more than 15 percent moisture. Within this profile you can define any three temperatures. You will choose the values of temperature and duration of heating experimentally. What Drying Temperature Should I Set? The drying temperature determines the duration of the process. Its value depends on the type of material. If the temperature is too low, it will under-dry the sample and, consequently, unnecessarily increase the measurement time, while if it is too high, it will cause a burning effect on the material. The drying temperature for the traditional (oven) method is determined by industry or factory standards. If there are no standards, you will select the temperature experimentally. The maximum drying temperature on the MA 5Y Moisture Analyzer is 160&deg;C. How Do I Finish the Drying? In 4 Ways The MA 5Y Moisture Analyzer has four finish modes: automatic, manual, time-defined and user-defined. Automatic mode You define the moisture loss limit value in 60 seconds. When the moisture analyzer reaches the set criterion, the measurement will automatically end. Manual mode You terminate the measurement yourself by pressing the STOP button. Time-defined mode The measurement ends after the set time has elapsed regardless of the result. You have up to 99 hours 59 minutes to manage! User-defined mode When you remove all volatiles from a sample, by definition, its mass should be constant. During drying, the dry mass of the sample is defined by a condition: if the mass of the sample is stable within 1 mg during the observation time (Auto 1-5), we consider that all volatile components have been removed from its structure. Digital Weighing Auditor Ensures that your moisture analyzer is ready for use. What is more, it informs about the need for a moisture analyzer inspection or a periodic audit of the moisture analyzer&rsquo;s accuracy and sensitivity. 10-Inch Display Bigger screen &ndash; 10&rsquo;&rsquo; &ndash; means more information in one place. On the new ELLIPSIS terminal, you will see up to 3 screens, widgets, graphs, statuses, notes, handy measurement history. Uncompromising User Verification For the first time ever, the moisture analyzer will verify the user using a password, RFID card, fingerprint reader, facial recognition mechanism, or any combination of these. Ambient Light &ndash; an Innovative Way for the Moisture Analyzer to Communicate With the User The light colour will tell you about status, process results, procedures, or alerts. Hotspot Use the moisture analyzer on any device connected to it. This can be a smartphone, tablet, or computer. RFID ELLIPSIS works with RFID tags* that can be used to tag your products or formulation ingredients in the database. They can also be used to identify a user. Live Note &ndash; Note Down Your Conclusions It&rsquo;s the first time you can add a voice memo to a measurement series or procedure report. If you prefer to write it down, ELLIPSIS allows you to add a text note. Handy Library This is where a series of recent measurements or a report ready for digital signature, according to 21 CFR Part 11, can be found. Widgets Prepared to display what you need most at any given moment. 21 CFR Part 11 Do you work in the pharmaceutical industry? Do you need a digital signature? We are offering the moisture analyzer which as a standalone fully meets the requirements of 21 CFR Part 11/ EU GMP Annex 11. Full data security Electronic signatures Validations Electronic records Audit trails Modbus TCP/IP is one of the most popular communication protocols in industrial automation. Implementing it in the 5Y balances and CY10 scales makes the devices of this series friendly to automation integrators. A balance or scale in a Modbus system is a slave device and performs tasks specified by the master device which is most often a PLC. Protocol Modbus TCP/IP in the 5Y balances and C10 scales enables, among other things, the realization of mass readout, zeroing and tare functions of the device, as well as tare settings and MIN and MAX thresholds. * RFID ISO/IEC 14443 Type A, 13.56 MHz

Motic PA43 BIO Trinocular Ergo Upright Pathology Microscope Objectives 2X, 4X, 10X, 20X, 40XPlan UC  (more)Observation Tube Tilting Trinocular Tube Head Illumination Kohler Illumination 6V/30WLED 3W Features - Transmitted Kohler illumination System ensures for the best optical quality, with additional flexibility between traditional 30W Halogen or LED illumination - Automatic power saving mode for whenever the microscope is left temporarily. Timeframe to activation is selectable by the user and allows protection of your samples from the heat of the illuminator. - ECO mode also results in energy savings which will extend the lifetime of the lamp, and also reduces overall operational costs. - The IL Function provides an optimized, consistent, and even brightness in illumination to allow maintained brightness level even if the observation magnification is changed during observation. - Equipped with a specially designed rackless stage, the ceramic coated surface provides durability and reliability, and offers an easy-to-use ergonomic stage with zero backlash. - The PA43 offer a good variety of contrast accessories that are available and easily upgradable to meet different requirements. The PA43 BIOMED is a new series from Motic Scientific, and represents a large step forward in combining modularity with ergonomics to improve application imaging workflows. A progression into routine work, this new microscope’s robust design and solid footprint does not compromise on optical quality and features. Its modularity offers flexibility when choosing a configuration that suits multiple end-user applications, from cost-effective solutions to high-quality optical systems for lab diagnostics. The microscope is not only modular but also flexible in design and can be upgraded at any time.INCLUDED: The Motic PA43 BIO Trinocular Ergo Upright Pathology Microscope includes: - Plan UC 2X, 4X,10X, 20X, 40X Objectives - Blue Filter - Power Cord - Operator's Manual - Manufacturer's Documentation - 5 Year Manufacturer's Warranty